MicoAir MG-F10 L1+L5 Dual-Band GNSS Module

Name: MicoAir MG-F10 L1+L5 Dual-Band GNSS Module
Brand: MicoAir
Price: 7799.0 INR
Availability: InStock

Rs. 7,799.00

The MicoAir MG-F10 is an L1+L5 dual-band GNSS module built on the u-blox NEO-F10N receiver with an IST8310 compass, supplied with a high-gain helix antenna on an SMA connector. Dual-band reception gives roughly 1 m CEP accuracy without RTK - the highest-performing MicoAir module short of RTK.

The L5 band is far more resistant to multipath interference than L1 alone, which makes the MG-F10 a strong choice near buildings, in urban areas, or anywhere reflected signals degrade a conventional single-band module. The helix antenna and 38 dB LNA speed up satellite acquisition, and up to four constellations are tracked at once with updates at up to 10 Hz. A blue LED shows power (solid) and 3D fix (blinking).

Key features

u-blox NEO-F10N, L1 (1575.42 MHz) + L5 (1176.45 MHz) dual-band
GPS/QZSS L1C/A + L5, Galileo E1-B/C + E5a, BeiDou B1C + B2a, NavIC SPS-L5
4 concurrent constellations, up to 10 Hz, ~1 m CEP
IST8310 compass
Helix antenna on SMA with 38 dB LNA
Compact bare board - 6 g without the antenna

Specifications

Input voltage: 5V
GPS interface: UART (3.3V LVTTL), 115200 baud, UBX-PVT protocol
Compass interface: I2C
Connector: SH1.0 6-pin (power, UART, I2C); antenna SMA
Board size: 22 x 34 x 13.4 mm
Weight: 6 g board, 21 g with antenna
Firmware: ArduPilot 4.4.0+, PX4 1.14.0+

Compatibility

Best on ArduPilot / PX4 - mapping, survey and autonomous missions near buildings. Includes NavIC (India's own constellation).
Wiring: GPS on a free FC UART, compass on the FC's I2C pads (SDA/SCL), 5V and GND.
MG-F10 vs MG-F10-C: same receiver, compass, antenna and accuracy. The MG-F10 is the bare board - smallest and lightest, for builds where you will mount or shroud it yourself. The MG-F10-C adds a protective case, GH1.25 connectors and a separate PPS output.
Overkill for Betaflight GPS Rescue - a standard M10 module does that job.