MicoAir743 V2 AM32 Stack
55A
Rs. 9,499.00
Skip to product information
MicoAir743 V2 AM32 Stack
Rs. 9,499.00
Specifications
| Dimensions (mm) | FC 36 x 36 x 8 |
|---|---|
| Cell count | 2S, 3S, 4S, 5S, 6S |
| Voltage range | 2-6S LiPo |
| Mount pattern | 30.5 x 30.5mm, 4mm holes |
| Stack size | 30.5 x 30.5mm |
| Connector | XT60 |
| Output power | ESC 55A or 70A per channel by variant; FC BEC 5V/3A and 12V/3A |
| Compatibility notes | Flight controller (MicoAir743 V2): STM32H743VIT6 at 480MHz with 2MB flash, dual IMU (BMI088 plus BMI270), SPL06 barometer, QMC5883L compass, AT7456E OSD, microSD card slot, Bluetooth, USB-C. 8 UARTs, 11 PWM, I2C, SWD, 2 ADC. Dedicated DJI O3/O4 VTX connector. 36 x 36 x 8mm, 10g. ESC runs AM32 firmware. Two current ratings are selectable above, 55A and 70A. Runs ArduPilot, PX4, INAV or Betaflight. VBAT is the only input that accepts pack voltage - other pins will burn out if fed high voltage. Note the H743 (H7) stack is the 55A and 70A one. The 50A Bluejay stack is the MicoAir405 (F4) board, listed separately. |
| In the box | 1x MicoAir743 V2 flight controller 1x 4GB TF card 1x MicoAir 4in1 AM32 ESC 2x 12AWG wire 1x ESC signal wire 7x connecting cable 1x capacitor 1x XT60 plug 8x rubber mat |
The MicoAir743 V2 AM32 Stack pairs MicoAir's H743 V2 flight controller with an AM32 4-in-1 ESC in a 30.5 x 30.5mm stack. It is one of the few compact FCs that runs ArduPilot, PX4, INAV and Betaflight, with dual IMUs, a barometer, built-in compass and onboard Bluetooth telemetry — ideal for GPS, mapping and autonomous builds. Choose the ESC rating above: 55A or 70A.
Features
- STM32H743 with dual IMU (BMI088 + BMI270)
- SPL06 barometer and built-in QMC5883L compass
- Onboard Bluetooth telemetry (UART8)
- MAX7456 analog OSD plus DisplayPort OSD for HD VTX
- 11 PWM outputs; DShot and bidirectional DShot on 1–8
- AM32 ESC firmware with current sensor and TVS spike protection
Flight controller (MicoAir743 V2)
| MCU | STM32H743VIT6 |
|---|---|
| IMU | BMI088 + BMI270 |
| Barometer | SPL06; compass: QMC5883L |
| UARTs | 8; I2C: 1 |
| BEC | 5V 3A and 12V 3A |
| Input | up to 6S LiPo |
| Mounting | 30.5 x 30.5mm (ø4mm) |
| Size | 36 x 36 x 8mm |
| Weight | 10g |
| Firmware | ArduPilot, PX4, INAV, Betaflight |
ESC
| Rating | 55A or 70A (selected) |
|---|---|
| Firmware | AM32 |
| Input | 2–6S |
| Mounting | 30.5 x 30.5mm |
Compatibility
- Frame: 30.5 x 30.5mm stack - 5-10" quads and mapping / survey builds.
- Battery: 2-6S. Feed pack voltage only into VBAT - other pins will burn out.
- Which to pick: this H743 stack is the 55A / 70A one. The cheaper MicoAir405 V2 50A is the F4 version.
- Video: analog OSD or DJI O3 / O4 via the dedicated connector (12V BEC).
Works with (available at AeroFlow)
- GPS: MicoAir M10G-5883, MicoAir MG-F10 dual-band
- Optical flow: MicoAir MTF-01; telemetry: MicoAir LR900-P
- Receiver: RadioMaster RP4TD
In the box
- 1x MicoAir743 V2 flight controller
- 1x AM32 4-in-1 ESC (selected rating)
- 1x 4GB microSD card
- 1x capacitor
- 1x XT60 connector with leads
- 1x soft-mount kit and 1x cable kit