MicoAir405 V2 Bluejay Stack
50A
Rs. 6,949.00
Skip to product information
MicoAir405 V2 Bluejay Stack
Rs. 6,949.00
Specifications
| Dimensions (mm) | FC 36 x 36 x 8 |
|---|---|
| Cell count | 2S, 3S, 4S, 5S, 6S |
| Voltage range | 2-6S LiPo |
| Mount pattern | FC 30.5 x 30.5mm 4mm holes; ESC 30.5 x 30.5mm M4 and 20 x 20mm M3 |
| Stack size | 30.5 x 30.5mm |
| Connector | XT60 |
| Output power | ESC 50A continuous per channel; FC BEC 5V/3A and 9V/3A |
| Compatibility notes | Flight controller (MicoAir405 V2): STM32F405 at 168MHz, BMI088 IMU, SPL06 barometer, integrated OSD, USB-C, 6 UARTs, 10 PWM outputs (channels 1-8 DShot, 1-4 bi-directional), I2C, SWD. SH1.0-6P connector for the DJI O3 air unit. 36 x 36 x 8mm, 9g. ESC: 4in1 50A continuous, BlueJay 48K firmware v0.19.2, DShot150/300/600 with bi-directional DShot and RPM feedback, current sensor fitted. MOSFETs are 40V 165A parts at 1.1 milliohm RDS, so heat stays low under sustained load. The ESC carries two mounting patterns: 30.5 x 30.5mm on M4 and 20 x 20mm on M3. FC to ESC is a socket connection, so no soldering between the boards. Officially supported by ArduPilot from v4.5.0 and INAV from v8.0.0. Note the F405 (F4) stack is the 50A one. The H743 (H7) stack comes with a 55A or 70A ESC and is listed separately. |
| In the box | 1x MicoAir405 V2 flight controller 1x MicoAir 4in1 50A Bluejay ESC 2x 12AWG wire 1x ESC signal wire 7x connecting cable 1x capacitor 1x XT60 plug 8x rubber mat |
The MicoAir405 V2 50A Bluejay Stack pairs the MicoAir405 V2 flight controller with a 50A Bluejay 4-in-1 ESC for 2–6S multirotors. The FC runs ArduPilot (from 4.5.0), INAV (from 8.0.0) or Betaflight, the boards connect by socket with no soldering between them, and the ESC's 1.1mΩ MOSFETs keep heat low under sustained load.
Features
- STM32F405 with BMI088 IMU and SPL06 barometer
- Official ArduPilot and INAV support
- 10 PWM outputs; channels 1–8 DShot, 1–4 bi-directional DShot
- SH1.0-6P connector for DJI O3 air units
- 50A Bluejay ESC with RPM feedback and current sensor
Flight controller (MicoAir405 V2)
| MCU | STM32F405, 168MHz |
|---|---|
| IMU | BMI088 |
| Barometer | SPL06 |
| OSD | integrated |
| UARTs | 6; I2C; SWD |
| BEC | 5V 3A and 9V 3A |
| USB | Type-C |
| Size | 36 x 36 x 8mm; mounting 30.5 x 30.5mm (4mm holes) |
| Weight | 9g |
ESC (4in1 50A Bluejay)
| Current | 50A continuous per channel |
|---|---|
| Input | 2–6S LiPo |
| Firmware | Bluejay 48K v0.19.2 |
| Protocols | DShot150/300/600, bi-directional DShot |
| MOSFETs | 40V 165A, 1.1mΩ RDS(on) |
| Current sensor | yes |
Compatibility
- Frame: 30.5 x 30.5mm stack - 5" to 7" builds.
- Battery: 2-6S.
- Video: analog OSD, or DJI O3 via the SH1.0-6P connector (9V BEC).
- F4 or H7? This is the F405 / 50A stack. For more processing, sensors and 55-70A choose the MicoAir743 V2 Stack.
Works with (available at AeroFlow)
- GPS: MicoAir M10G-5883
- Telemetry: MicoAir LR900-P
- Optical flow: MicoAir MTF-01
- Motors: GEPRC SPEEDX2 2207E
In the box
- 1x MicoAir405 V2 flight controller, 1x 4in1 50A Bluejay ESC
- 2x 12AWG wires, 1x ESC signal wire, 7x connecting cables
- 1x capacitor, 1x XT60 plug
- 8x rubber mats