Matek H743-SLIM V4 Flight Controller
Rs. 14,999.00
Skip to product information
Matek H743-SLIM V4 Flight Controller
Rs. 14,999.00
The Matek H743-SLIM V4 is a compact 30.5 x 30.5mm H7 flight controller for ArduPilot, INAV and Betaflight, popular on long-range quads, planes and autonomous builds. V4 adds dual ICM42688P gyros, a water-resistant DPS368 barometer, TVS input protection and a stronger 2.5A BEC.
Features
- STM32H743 at 480MHz
- Dual ICM42688P gyros
- DPS368 barometer (IPx8 rated)
- MicroSD blackbox
- 13 PWM outputs and CAN bus
- 2–8S input with TVS protection
Specifications
| MCU | STM32H743VIH6, 480MHz, 2MB flash |
|---|---|
| IMU | 2x ICM42688P |
| Barometer | DPS368 |
| OSD | AT7456E |
| Blackbox | microSD |
| UARTs | 7 (built-in inversion) |
| PWM outputs | 13 (incl. LED) |
| CAN | 1 (JST-GH 4-pin) |
| BEC | 5V 2.5A continuous (3A max) |
| Input | 6–36V (2–8S LiPo) |
| Mounting | 30.5 x 30.5mm (ø4mm, ø3mm grommets) |
| Size | 36 x 36 x 5mm |
| Weight | 7g |
| Firmware | ArduPilot, Betaflight, INAV (MATEKH743) |
Compatibility
- BEC is 5V only - a DJI O4 / analog VTX needing 9-12V must run from VBAT or a separate BEC.
- FC only - no ESC. Pair with a 30.5 x 30.5mm 4-in-1 ESC, or single ESCs for planes and hex / octo builds (13 outputs).
- No compass on board - add a GPS with compass for navigation modes.
Works with (available at AeroFlow)
- 4-in-1 ESC: SEQURE Blueson A2
- Extra BEC: iFlight BLITZ BEC V1.1
- GPS: GEPRC GEP-M1025-DQ, MicoAir MG-F10
In the box
- 1x Matek H743-SLIM V4
- Silicone grommets (M4 to M3)
- JST-SH 8-pin cable and connectors
- JST-GH 4-pin CAN cable