SEQURE H743 V2 Flight Controller
Rs. 6,799.00
Skip to product information
SEQURE H743 V2 Flight Controller
Rs. 6,799.00
The SEQURE H743 V2 is a 4–8S flight controller built around a 480MHz STM32H743 and an ICM-42688-P gyro, with an onboard barometer, OSD and 16MB blackbox. It has six UARTs and eight motor outputs for X8 builds, and a dual BEC with an independent 10V 2A rail for DJI O3/O4/O4 Pro and analog VTXs. Both 20x20mm and 30.5x30.5mm mounting holes are on the same board.
Features
- STM32H743 up to 480MHz
- ICM-42688-P gyro, barometer, AT7456E OSD, 16MB blackbox
- 6 UARTs, motor outputs M1–M8 (X8 capable)
- Dual BEC: 5V 2.5A and independent 10V 2A for HD air units
- Plug-in connectors; WS2812 LED and buzzer support
- Betaflight (default), INAV or ArduPilot
Specifications
| Processor | STM32H743 |
|---|---|
| Gyro | ICM-42688-P |
| Barometer | BMP280 / DPS310 / DPS368 |
| OSD | AT7456E |
| Blackbox | 16MB |
| Firmware target | SEQUREH7V2 |
| Input | 4–8S LiPo/LiHV |
| BEC | 5V 2.5A; 10V 2A |
| UARTs | 6 |
| ESC telemetry | RX8 |
| USB | Type-C |
| Mounting | 20 x 20mm and 30.5 x 30.5mm (ø4mm / M3) |
| Size | 36.5 x 36.5 x 6mm |
| Weight | 7.3g |
Compatibility
- Battery: 4-8S. It will not run on 2-3S - not for small builds.
- FC only - no ESC. Bolts to either 20x20 or 30.5x30.5 ESCs; 8 outputs for X8 / octo with two ESCs.
- Video: analog OSD, or DJI O3 / O4 / O4 Pro on the 10V BEC.
Works with (available at AeroFlow)
- ESC: SEQURE Blueson A2 (30.5), Blueson A1 (20x20)
- Or as a matched stack: H743 V2 & E130 G2, H743 V2 & E160 G2
- Frames (7-10"): GEPRC Mark4-7
- GPS: GEPRC GEP-M1025-DQ
In the box
- 1x SEQURE H743 V2 flight controller
- 1x 40mm reverse double-headed SH1.0-8P cable
- 2x 100mm single-head SH1.0-4P cables
- 1x 5V buzzer
- 5x M3x8mm and 5x M3x6.6mm shock-absorbing balls