GEPRC TAKER F405 BLS 60A V2 Stack

Rs. 7,399.00

Specifications

Weight (g)	22.2
Dimensions (mm)	FC 37.15 x 37.15; ESC 42 x 45.7
Cell count	3S, 4S, 5S, 6S
Voltage range	3-6S LiPo
Mount pattern	30.5 x 30.5mm, 4mm holes (3mm with the silicone grommets fitted)
Stack size	30.5 x 30.5mm
Connector	XT60
Output power	ESC 60A continuous, 65A burst (5s); FC BEC 5V/3A and 12V/2.5A
Compatibility notes	FC GEP-F405-HD V3: STM32F405, ICM42688-P (SPI), BMP280 barometer, 16MB blackbox, Betaflight OSD (AT7456E), 6 UARTs, M1-M6, Type-C, integrated LC filter, dual BEC 5V/3A + 12V/2.5A, direct DJI air unit plug. Target GEPRCF405. 37.15 x 37.15mm, 7.3g, 3-6S. ESC TAKER H60_BLS: 3-6S, 60A continuous / 65A burst (5s), BLHeli_S target B_X_30, DShot150/300/600, current sensor. 42 x 45.7mm, 14.9g. Both boards mount 30.5 x 30.5mm (4mm holes, 3mm with grommets). Stack about 22.2g.
In the box	1x GEP-F405-HD V3 flight controller 1x TAKER H60_BLS 60A 4-in-1 ESC 1x capacitor 1x DJI air unit adapter cable 1x flight controller adapter cable 1x XT60 power cable 4x M3x30 screws 4x M3x25 screws 8x nylon nuts 8x silicone grommets 2x SH1.0 4-pin silicone cables 1x camera connection cable

The GEPRC TAKER F405 BLS 60A V2 Stack pairs the GEP-F405-HD V3 flight controller with the TAKER H60_BLS 60A 4-in-1 ESC. It is a plug-and-play 30.5mm stack for 3–6S freestyle builds, with a direct plug for the DJI air unit so HD setups need no soldering.

Features

Mainstream STM32F405 processor with the ICM42688-P gyro
16MB onboard blackbox for flight logs
Integrated LC power filter
Type-C USB port
Plugs straight into a DJI air unit — no soldering for HD video
Dual independent BEC: 12V @ 2.5A and 5V @ 3A
TAKER H60_BLS 60A 4-in-1 ESC (BLHeli_S) for smooth motor response
Silicone shock-absorbing mounts keep the gyro stable

Flight controller (GEP-F405-HD V3)

MCU	STM32F405
Gyro (IMU)	ICM42688-P (SPI)
Barometer	BMP280
Blackbox	16MB onboard
OSD	Betaflight OSD (AT7456E chip)
UARTs	6
Motor outputs	M1–M6
BEC	5V @ 3A + 12V @ 2.5A, dual independent
Power filter	Integrated LC filter
USB	Type-C
Air unit	Direct plug-in for DJI air unit
Input voltage	3–6S LiPo
Size	37.15 x 37.15mm
Mounting	30.5 x 30.5mm (4mm holes, 3mm with silicone grommets)
Weight	7.3g
Firmware target	GEPRCF405

ESC (TAKER H60_BLS 60A 4-in-1)

Continuous / burst	60A / 65A (5 seconds)
Input voltage	3–6S LiPo
Firmware	BLHeli_S, target B_X_30
Protocols	DShot150 / DShot300 / DShot600
Current sensor	Yes
Size	42 x 45.7mm
Mounting	30.5 x 30.5mm (4mm holes, 3mm with silicone grommets)
Weight	14.9g

Compatibility

Battery: 3–6S LiPo. XT60 power lead included.
Best for: 5" freestyle builds. For heavier 5–7" builds see the 65A V2 Stack; for 7" and up see the 80A V2 Stack.
Frame: 30.5 x 30.5mm stack mount. Stack weight about 22.2g (FC 7.3g + ESC 14.9g).
Video: DJI air unit plug-in or analog VTX. Receiver: not included.