GEPRC TAKER F405 BLS 80A V2 Stack

Rs. 11,999.00

Specifications

Weight (g)	35.4
Dimensions (mm)	FC 37.15 x 37.15; ESC 56.3 x 61.1
Cell count	3S, 4S, 5S, 6S
Voltage range	3-6S LiPo
Mount pattern	30.5 x 30.5mm, 4mm holes (3mm with the silicone grommets fitted)
Stack size	30.5 x 30.5mm
Connector	XT90
Output power	ESC 80A continuous, 85A burst (5s); FC BEC 5V/3A and 12V/2.5A
Compatibility notes	FC GEP-F405-HD V3: STM32F405, ICM42688-P (SPI), onboard barometer, 16MB blackbox, Betaflight OSD (AT7456E), 6 UARTs, M1-M6, Type-C, integrated LC filter, dual BEC 5V/3A + 12V/2.5A, direct DJI air unit plug. Target GEPRCF405. 37.15 x 37.15mm, 7.3g, 3-6S. ESC TAKER H80_BLS: 3-6S, 80A continuous / 85A burst (5s), dual MOS, BLHeli_S target B_X_30, DShot150/300/600, current sensor. 56.3 x 61.1mm with 30.5 x 30.5mm holes, 28.1g - check frame clearance. Ships with XT90 plug, 10AWG 240mm lead and dual 50V 2200uF filter board. Stack about 35.4g.
In the box	1x GEP-F405-HD V3 flight controller 1x TAKER H80_BLS 80A 4-in-1 ESC 1x filter board (dual 50V 2200uF capacitors) 1x DJI connection cable (SH1.0 6-pin, 100mm) 1x FC adapter cable (SH1.0 8-pin, 30mm) 1x receiver silicone cable (SH1.0 4-pin, 150mm) 1x camera connection cable (SH1.0 to SH1.25 3-pin, 60mm) 1x VTX connection cable (SH1.0 4-pin to 6-pin, 100mm) 1x XT90 battery plug 1x red and black power cable (10AWG, 240mm) 4x M3x30 screws 4x M3x25 screws 8x M3 nylon nuts 12x M3 silicone anti-vibration grommets

The GEPRC TAKER F405 BLS 80A V2 Stack pairs the GEP-F405-HD V3 flight controller with the TAKER H80_BLS 80A dual-MOS 4-in-1 ESC — a high-current stack for big long-range, cinematic and heavy-lift builds. It ships with an XT90 plug, a 10AWG power lead and a dual-capacitor filter board, and plugs straight into a DJI air unit.

Features

Mainstream STM32F405 processor with the ICM42688-P gyro
16MB onboard blackbox for flight logs
Integrated LC power filter
Type-C USB port
Plugs straight into a DJI air unit — no soldering for HD video
Dual independent BEC: 12V @ 2.5A and 5V @ 3A
TAKER H80_BLS 80A 4-in-1 ESC with dual MOSFETs for high current
Silicone shock-absorbing mounts keep the gyro stable

Flight controller (GEP-F405-HD V3)

MCU	STM32F405
Gyro (IMU)	ICM42688-P (SPI)
Barometer	Yes (onboard)
Blackbox	16MB onboard
OSD	Betaflight OSD (AT7456E chip)
UARTs	6
Motor outputs	M1–M6
BEC	5V @ 3A + 12V @ 2.5A, dual independent
Power filter	Integrated LC filter
USB	Type-C
Air unit	Direct plug-in for DJI air unit
Input voltage	3–6S LiPo
Size	37.15 x 37.15mm
Mounting	30.5 x 30.5mm (4mm holes, 3mm with silicone grommets)
Weight	7.3g
Firmware target	GEPRCF405

ESC (TAKER H80_BLS 80A 4-in-1)

Continuous / burst	80A / 85A (5 seconds)
Input voltage	3–6S LiPo
Firmware	BLHeli_S, target B_X_30
Protocols	DShot150 / DShot300 / DShot600
Current sensor	Yes
Size	56.3 x 61.1mm
Mounting	30.5 x 30.5mm (4mm holes, 3mm with silicone grommets)
Weight	28.1g

Compatibility

Battery: 3–6S LiPo. Ships with an XT90 battery plug and 10AWG lead (not XT60).
Check frame clearance first: the ESC board is 56.3 x 61.1mm — much larger than the 42 x 45.7mm board on the 60A/65A stacks — though it still uses 30.5 x 30.5mm mounting holes.
Best for: 7" and larger long-range, cinematic and heavy-lift builds. For 5" see the 60A V2 Stack or 65A V2 Stack.
Weight: stack about 35.4g (FC 7.3g + ESC 28.1g).
Video: DJI air unit plug-in or analog VTX. Receiver: not included.