TBS Unify Pro 5G8 HV SMA
Rs. 5,399.00
Skip to product information
TBS Unify Pro 5G8 HV SMA
Rs. 5,399.00
The TBS Unify Pro 5G8 HV (SMA) is Team BlackSheep's high-voltage analog video transmitter, built to run directly from 2S–6S battery power with clean 5V output for the FPV camera — no separate BEC or power filtering board required.
At just 7g and 31 x 22 x 6mm, it adds almost no weight or bulk. Output power is adjustable from 25mW up to 800mW across 40 channels.
Key features
- PitMode: drops output well below 1mW so you can power up on the grid without interfering with pilots in the air
- SmartAudio: control power, band, channel and frequency from the flight controller OSD, a smart device, or your radio with TBS Crossfire
- CleanSwitch: interference-free power-on and channel changes
Specifications
| Video system | Analog |
|---|---|
| Input voltage | 6V–25V (2S–6S) |
| Frequency band | 5658–5945MHz |
| Output power | 25 / 200 / 500 / 800mW |
| Channels | 40CH |
| Video format | NTSC, PAL |
| Pit mode | Yes |
| SmartAudio | Yes |
| Antenna connector | SMA female (u.FL internal) |
| Size | 31 x 22 x 6mm |
| Weight | 7g |
Compatibility
- Goggles: any 5.8GHz analog goggle or receiver. Not DJI, Walksnail or HDZero.
- Antenna: SMA female on the VTX - use an SMA-male antenna. MMCX or U.FL antennas need an adapter.
- Mounting: no stack holes - it is designed to be fixed with tape or zip ties.
- Flight controller: SmartAudio UART control in Betaflight / INAV.
Works with (available at AeroFlow)
- Goggles: Skyzone Cobra X V4, HDZero Goggle 2
- SMA antennas: iFlight Albatross V2 90mm, Albatross V2.1 130mm
In the box
- 1 x TBS Unify Pro 5G8 HV video transmitter
- 1 x Video transmitter / camera / power cable
Note: a HAM/amateur licence may be required to unlock higher power levels and HAM-only channels. Only licence-free channels are enabled by default.