HDZero Goggle 2 with Echo Antenna Kit
Red
Rs. 88,999.00
Skip to product information
HDZero Goggle 2 with Echo Antenna Kit
Rs. 88,999.00
The HDZero Goggle 2 in Red, supplied with the HDZero Echo Antenna Kit. It builds on the original Goggle with a sharper dust-resistant optic module, a built-in analog receiver, integrated WiFi mirroring and a protective hard case — while keeping the ultra-low latency, open-source flexibility and combined digital + analog support that made the original popular.
By integrating the full display pipeline with HDZero's fixed-latency video transmission, the Goggle 2 achieves 3ms glass-to-glass sub-frame latency with no jitter or dropped frames. The one-way broadcast means you can fly alongside friends without interfering with nearby pilots.
Features
- Fully enclosed dust-resistant optical module, <1.5% distortion
- 90Hz 1080p OLED micro-displays with sliding IPD adjustment and focus dials
- Runs Linux — all user interface code is open source, CAD files published
- Built-in high-sensitivity analog receiver sharing antennas with the HDZero receiver
- Integrated 2D deinterlacer adding no delay on analog input
- Built-in 2.4GHz WiFi video streaming for live mirroring to phone or PC
- Built-in H.265 DVR for HDMI in / analog / HDZero input
- Built-in microphone for DVR, plus 3.5mm headphone/mic combo jack
- HDMI input and output; 3.5mm analog AV input
- Built-in ELRS backpack support
- 6-axis inertial measurement for head-tracking pan and tilt
- Three independently addressable soft-mounted fans to prevent fogging without screen vibration
- Mounting rails for patch antennas; recessed front SMA jacks so antennas stay on when packed
- On/off sliding switch; supports diopter lens inserts
- Side-mounted analog module bay accepting most current analog modules
Specifications
| Display | Full HD 1920x1080p 90fps OLED micro display |
|---|---|
| Resolutions | 1080p30, 720p60, 540p90, 540p60 |
| FOV | 46° |
| HDMI input latency | <1ms |
| Analog glass-to-glass latency | <2ms |
| HDZero glass-to-glass latency | <3ms |
| IPD adjustment range | 58–72mm |
| Focus adjustment range | +4 to -7 diopter |
| Input voltage | 7V–25.2V (2S–6S) |
| Colour | Red |
Echo Antenna Kit (included)
- 2 x patch antennas (~7dBi gain)
- 2 x RHCP omni antennas (~3dBi gain)
- Injection-moulded angled mounts for alignment
- VSWR ≤1.5, 100% factory tested
Compatibility
- Works with: HDZero digital VTXs and any 5.8GHz analog VTX (built-in analog receiver) - so one goggle covers both HDZero and analog quads.
- Via HDMI-in: any receiver with HDMI output, e.g. the Walksnail Avatar VRX or Ascent VRX.
- Does not receive directly: DJI or Walksnail air units - those are closed systems and need their own goggles or a VRX on HDMI.
- Antenna polarity: the included Echo antennas are RHCP - your VTX antennas must also be RHCP for best range.
- Power: 2S-6S; battery not included.
Works with (available at AeroFlow)
- HDZero VTXs: AIO15 + Lux camera
- Analog VTXs: TBS Unify Pro32 HV, HGLRC Zeus 800mW, analog whoop boards like the BETAFPV Matrix 1S 5IN1 II
- HDMI sources: Walksnail Avatar VRX, Walksnail Ascent VRX
- Strap: Ethix Goggle Strap HD V3
In the box
- 1 x HDZero Goggle 2 (Red)
- 1 x HDZero Echo Antenna Kit
- 1 x Wide face plate
- 1 x Narrow face plate
- 1 x Foam padding
- 1 x Goggle strap
- 1 x 1200mm XT60 cable
- 1 x 150mm HDZero VTX programming cable
- 1 x Hard case travel box
- 1 x Lens cloth
Note: battery not included.