TBS Lucid 6S 4in1 ESC - 60A 3-6S AM32
Rs. 5,549.00
Skip to product information
TBS Lucid 6S 4in1 ESC - 60A 3-6S AM32
Rs. 5,549.00
The TBS Lucid 6S 4in1 ESC is a 60A continuous, 70A burst AM32 4-in-1 built for racing and freestyle. It uses an 8-layer high-current-density board with roughly twice the on-board capacitance TBS sees as typical, and its thermal design avoids heavy heatsinks. TBS's Gorilla bracket mounting keeps bolts out of the centre of the ESC, with adapters for standard 20x20mm and 30.5x30.5mm stacks.
Features
- 60A x4 continuous, 70A x4 burst on 3-6S
- AM32 firmware with bi-directional DShot and KISS telemetry
- 8-layer board, high on-board capacitance, no heavy heatsinks
- Gorilla mount plus 20x20 / 30.5x30.5mm compatibility
- Current sensor output
Specifications
| Firmware | AlkaMotors32 (AM32), target AM32_TBS_6S_4IN1_F421 |
|---|---|
| Rated current | 60A x4 (300 s) |
| Peak current | 70A x4 (60 s) |
| Input | 3-6S LiPo |
| Protocol | bi-directional DShot300/600, KISS ESC telemetry |
| Current port | yes |
| BEC | no |
| Props | up to 9 inch (over 7 inch needs good airflow) |
| Size | 34 x 44mm |
| Mounting | Gorilla 39.5 x 16mm, 30.5 x 30.5mm, or 20 x 20mm via bracket |
| Weight | 13.81g (19g with brackets) |
Compatibility
- ESC only - no BEC. Your flight controller must have its own BEC for 5V/9V devices.
- Flight controller: any FC with an 8-pin 4-in-1 ESC plug or solder pads; the included bracket takes 20x20 FCs, and 30.5x30.5 FCs bolt on directly.
- Battery: 3-6S. Motors from 3" to 9" props (good airflow above 7").
In the box
- 1x TBS Lucid 4in1 ESC
- 4x 2.2 x 4mm standoffs
- 1x aluminium top bracket for 20x20 FCs
- 1x XT60 power connector
- 1x 470uF 6S capacitor
- 4x M2x12 and 4x M2x14 screws
Works with (available at AeroFlow)
- Flight controllers: TBS Lucid H7 FC, MicoAir743 V2, Foxeer F722 V4
- Or buy it pre-matched: TBS Lucid Freestyle Stack 6S 60A
- Motors: T-Motor Velox V3 2207