RadioMaster RP3 V2 ExpressLRS 2.4GHz Nano Receiver
Rs. 2,199.00
Skip to product information
RadioMaster RP3 V2 ExpressLRS 2.4GHz Nano Receiver
Rs. 2,199.00
The RadioMaster RP3 V2 is a nano-sized 2.4GHz ExpressLRS diversity receiver designed for size, ease of use and range. An LNA boosts receive sensitivity, a PA allows up to 100mW telemetry, and antenna switching between its two T antennas gives a more stable link. A built-in TCXO and Wi-Fi updates round it out.
Key features
- Antenna diversity with two 65mm T antennas
- LNA for better receive range; PA for up to 100mW telemetry
- Built-in TCXO for temperature-stable frequency
- Optimised PCB for better heat dissipation
- Wi-Fi updates without removing the receiver
- Bind-phrase binding – no bind button needed
Specifications
| MCU | ESP8285 |
|---|---|
| RF chip | SX1281 |
| Telemetry power | Up to 100mW |
| Antennas | 2x 65mm 2.4GHz T antenna |
| Frequency range | 2.404–2.479GHz |
| Max refresh rate | 500Hz / F1000Hz |
| Min refresh rate | 25Hz |
| Working voltage | 5V DC |
| Weight | 4.6g (with both antennas) |
| Dimensions | 22 x 13 x 4mm |
| Firmware target | RadioMaster RP3 Diversity 2400 RX |
| Bus interface | CRSF |
Compatibility
- Radio link: ExpressLRS 2.4GHz only - any ELRS 2.4GHz radio or module (3.x). Not Crossfire, FrSky, FlySky or DJI.
- Wiring: 4 wires to a flight-controller UART - RX to FC TX, TX to FC RX, 5V and GND. Serial RX, CRSF protocol.
- Use: 3-7" quads and fixed-wing - mount the two antennas at 90° to each other for best diversity. Too big for 65-75mm whoops.
Works with (available at AeroFlow)
- Radios: RadioMaster Pocket radio (ELRS), RadioMaster TX16S MK3 radio
- Stacks: SpeedyBee F405 V5, GEPRC TAKER F722 BT
In the box
- 1x RP3 V2 diversity receiver
- 2x 65mm UFL 2.4GHz T antenna
- 1x CRSF wire
- 1x user manual