SpeedyBee F405 V5 OX32 55A Stack
Deluxe
Rs. 10,999.00
Skip to product information
SpeedyBee F405 V5 OX32 55A Stack
Rs. 10,999.00
Specifications
| Weight (g) | 27.2 |
|---|---|
| Dimensions (mm) | FC 39 x 39 x 4.9, ESC 40.9 x 44.9 x 8.0 including heatsink |
| Cell count | 3S, 4S, 5S, 6S |
| Voltage range | 3-6S LiPo |
| Mount pattern | 30.5 x 30.5mm, 4mm side-opening holes |
| Stack size | 30.5 x 30.5mm |
| Output power | ESC 55A continuous per channel (220A total), 70A max per channel (280A total) |
| Compatibility notes | Flight controller (SpeedyBee F405 V5): STM32F405, ICM42688P gyro, SPA06-003 barometer, AT7456E OSD, 16MB blackbox, USB-C. Betaflight target SPEEDYBEEF405V5, shipped on Betaflight 4.5.2. 8.1g. Bluetooth built in for tuning through the SpeedyBee app, including wireless firmware flashing. DJI air unit connects either by 6-pin direct plug or by soldering. ESC: OX32 firmware (documented at ox32.oxbot.com), DShot300/600, VBAT power output, current sensor and ESC telemetry both supported. 19.1g. Stated weight is the sum of the two boards. Two editions, selectable above: Standard, and Deluxe which adds build tools (soldering practice board, power expansion boards, USB-C extension module, short-circuit protection tool). FC and ESC are identical in both. |
The SpeedyBee F405 V5 OX32 55A Stack pairs SpeedyBee's F405 V5 flight controller with a 55A OX32 4-in-1 ESC in a 30.5 x 30.5mm stack for 3–6S 5" builds. Built-in Bluetooth lets you tune Betaflight and flash firmware from the SpeedyBee app in the field. Choose the Standard edition, or the Deluxe edition with extra build tools — the flight controller and ESC are identical in both.
Features
- Bluetooth tuning and wireless firmware updates via the SpeedyBee app
- Built-in barometer and 16MB blackbox
- Direct sockets for GPS, receiver and DJI air units
- ESC with nickel-plated bus bars, double-sided heat spreading, TVS diode, current sensor and telemetry
Flight controller (F405 V5)
| MCU | STM32F405 |
|---|---|
| Gyro | ICM42688P |
| Barometer | SPA06-003 |
| OSD | AT7456E |
| Blackbox | 16MB |
| UARTs | 6 (UART1 used for Bluetooth) |
| BEC | 5V, 9V, 3.3V and 4.5V outputs |
| Input | 3–6S LiPo |
| Mounting | 30.5 x 30.5mm (ø4mm) |
| Size | 39 x 39 x 4.9mm |
| Weight | 8.1g |
| Firmware target | SPEEDYBEEF405V5 |
ESC (55A OX32 4-in-1)
| Continuous / max current | 55A / 70A per channel |
|---|---|
| Input | 3–6S LiPo |
| Firmware | OX32 |
| Protocols | DShot300/600 |
| Mounting | 30.5 x 30.5mm (ø4mm) |
| Size | 40.9 x 44.9 x 8mm |
Standard or Deluxe?
- Standard: the F405 V5 flight controller and 55A OX32 ESC with the usual FC and ESC accessory packs (cables, capacitor, power lead and mounting hardware).
- Deluxe: everything in Standard, plus build tools — soldering practice board, 4x power expansion boards, USB-C extension module and a smart short-circuit protection tool.
Compatibility
- Frame: 30.5 x 30.5mm stack (M3 with grommets) — 5" freestyle frames.
- Battery: 3–6S. Not for 2S.
- Video: analog OSD, or any DJI air unit by 6-pin plug or soldering (9V BEC). Receiver: not included.
Works with (available at AeroFlow)
- Motors: T-Motor Velox V3 2207, GEPRC SPEEDX2 2207E
- Receiver: SpeedyBee Nano ELRS
In the box
- 1x F405 V5 flight controller and 1x 55A OX32 4-in-1 ESC
- Active buzzer, 1000µF 35V capacitor, XT60 lead (120mm)
- M3 stack bolts, nylon nuts, silicone washers and grommets
- Assorted SH1.0 cables
- Deluxe only: soldering practice board, 4x power expansion boards, USB-C extension module and smart short-circuit protection tool