TX16S MK3 Radio Controller (ELRS/M2)

RadioMaster TX16S MK3 Radio Controller

ELRS M2
Rs. 23,999.00
Skip to product information
TX16S MK3 Radio Controller (ELRS/M2)

RadioMaster TX16S MK3 Radio Controller

Rs. 23,999.00
VersionELRS M2
Share on WhatsApp

The RadioMaster TX16S MK3 is the next evolution of the legendary TX16S. An STM32 H7 processor drives a big 5-inch 800x480 IPS touchscreen, V6 quad-bearing Hall gimbals give smooth, precise control, and the internal dual-LR1121 ExpressLRS module runs 2.4GHz Gemini and Sub-GHz 900MHz. Programmable RGB gimbal rings, a motion sensor, quiet cooling fans and modular shoulder switches complete a radio built to last for years.

RadioMaster TX16S MK3 radio controller

Key features

  • STM32 H7 processor for fast, responsive EdgeTX
  • 5-inch 800x480 IPS touchscreen with auto backlight
  • V6 quad-bearing Hall sensor gimbals (AG02 compatible)
  • Dual-band internal ExpressLRS: 2.4GHz Gemini + Sub-GHz 900MHz (2x LR1121)
  • LUA-controlled RGB gimbal light rings
  • Built-in motion sensor for tilt-based controls
  • Low-noise cooling fans and aluminium heat sink
  • Smart balance charging, dual foldable antennas, digital audio
  • Built-in flash plus microSD slot; removable modular shoulder panels
  • JR-compatible module bay
TX16S MK3 radioTX16S MK3 radioTX16S MK3 radioTX16S MK3 radioTX16S MK3 radioTX16S MK3 radioTX16S MK3 radioTX16S MK3 radioTX16S MK3 radioTX16S MK3 radioTX16S MK3 radioTX16S MK3 radioTX16S MK3 radioTX16S MK3 radio

Specifications

Colour Black / Transparent Charcoal
Voltage range 6.6–8.4V DC
Working current 1.10A (at max RF output)
Firmware EdgeTX 3.0.0 or higher
Internal RF ExpressLRS, 2x LR1121
Frequency ISM 2.4GHz and Sub-GHz 900MHz
Channels Up to 16
Gimbals V6 Hall sensor
Storage Built-in flash + microSD slot (card not included)
Display 5-inch IPS touchscreen, 800x480
Battery 2x 18650 Li-ion, 21700 5000mAh Li-ion or 2S 7.4V LiPo (not included)
Upgrade method USB / EdgeTX Companion
Module bay JR-compatible
Dimensions 200 x 178 x 88mm
Weight 813g (without battery)

Compatibility

  • Binds to: any ExpressLRS receiver - 2.4GHz, 900MHz and dual-band Gemini receivers (XR4, DBR4, GEPRC Gemini).
  • Other protocols: the JR bay takes full-size modules (e.g. TBS Crossfire / Tracer, FrSky). Does not control DJI drones.
  • In India: flash radio and receivers to the ELRS IN866 domain before using 900MHz (865-867MHz is the licence-free band). 2.4GHz works as shipped.
  • Mode: M2 (throttle on the left).

In the box

  • 1x TX16S MK3 radio controller
  • 1x signature carry case
  • 1x 18650 battery tray
  • 2x replacement shoulder panels
  • 1x USB-C cable
  • 1x screen protector
  • 1x 1.5mm hex wrench
  • 4x low-tension gimbal springs
  • 2x gimbal stick set screws
  • 1x nylon neck strap
  • 1x RadioMaster sticker set
  • 1x manual and inventory card

Works with (available at AeroFlow)

You will also need

Good to know
  • Also compatible with mLRS.

You may also like