DBR4 Dual Band Xross Gemini ExpressLRS Receiver

RadioMaster DBR4 Dual Band Xross Gemini ExpressLRS Receiver

Rs. 3,299.00
Skip to product information
DBR4 Dual Band Xross Gemini ExpressLRS Receiver

RadioMaster DBR4 Dual Band Xross Gemini ExpressLRS Receiver

Rs. 3,299.00
Share on WhatsApp

The RadioMaster DBR4 is a dual-band, dual-channel ExpressLRS Gemini receiver designed as the companion to the RadioMaster Nomad module. It has two dual-band sections, each able to receive 2.4GHz and 900MHz at the same time, and four separate wire antennas you can place for the best coverage – ideal for long-range and fixed-wing builds where every packet counts.

RadioMaster DBR4 Gemini Xrossband receiver

Key features

  • Two dual-band sections – 2.4GHz and 900MHz received simultaneously
  • ExpressLRS Gemini on 2.4GHz and 868/900MHz, plus Gemini Xrossband (Gem-X)
  • Four discrete antennas for flexible placement
  • Two Semtech LR1121 transceivers
  • Telemetry power up to 100mW
  • 20 x 20mm mounting holes, vibration dampeners included
DBR4 receiverDBR4 receiverDBR4 receiverDBR4 receiverDBR4 receiverDBR4 receiverDBR4 receiverDBR4 receiver

Specifications

Type ISM 2.4GHz, FCC 915MHz
MCU ESP32
RF chips 2x Semtech LR1121
Telemetry power Up to 100mW
Antennas 2x 2.4GHz wire + 2x 900MHz wire
Frequency range 2.404–2.479GHz / 903.5–926.9MHz
Max refresh rate 500Hz
Min refresh rate 50Hz
Working voltage 4.5–8.4V DC
Weight 2.70g without antennas / 5.30g with antennas
Dimensions 27.2 x 27.2mm
Firmware ExpressLRS v3.3.2 pre-installed
Bus interface CRSF

Compatibility

  • Ships on FCC 915MHz firmware (903.5-926.9MHz), which is the US band. In India the licence-free sub-GHz band is 865-867MHz - reflash radio and receiver to the ExpressLRS IN866 domain before using 900MHz. 2.4GHz needs no change.
  • Full Gem-X needs a dual-band transmitter: GX12, TX16S MK3 / MK3 MAX or the Nomad module.
  • Mounting: 20 x 20mm holes - fits a 20x20 stack position or fixed-wing bay. Too large for whoops and small cinewhoops.
  • Wiring: CRSF to an FC UART, 4.5-8.4V supply.

Works with (available at AeroFlow)

In the box

  • 1x DBR4 Gemini Xrossband receiver
  • 2x 2.4GHz wire antenna
  • 2x 900MHz wire antenna
  • 1x CRSF wire
  • 4x 4mm red vibration dampeners
  • 4x 3mm black vibration dampeners
  • 1x manual card

You may also like