HGLRC M100 PRO GPS Module

Rs. 1,899.00

Specifications

Part number	M100-PRO
Weight (g)	7.9
Dimensions (mm)	21.2 x 21.2 x 8.2
Voltage range	3.6-5.5V
Connector	SH1.0 6-pin
Frequency	GPS L1, GLONASS G1, BDS B1, Galileo E1, QZSS L1, SBAS L1, IRNSS
Compatibility notes	Upgraded M100 with 120 receive channels for faster acquisition and 50+ satellites in view; QMC5883L compass. GPS, GLONASS, BDS, Galileo, QZSS, SBAS and IRNSS (NavIC). UBX protocol, 115200, 10Hz. Input 3.6-5.5V - note the 3.6V minimum; it will not run from a 3.3V GPS pad.

The HGLRC M100 PRO is the upgraded version of the M100 series, using a 10th-generation chip with the receiving channel count expanded to 120ch. That lets it find satellites faster and hold 50+ in view, with five-mode positioning for a strong, stable signal. A QMC5883L compass provides accurate heading.

Features

10th-generation chip, 50+ satellite searches
QMC5883L compass for more accurate pointing
120 receiving channels — faster and broader satellite acquisition
Five-mode positioning

Product parameters

Chip	B101 (10th generation)
Receiving channels	120
Baud rate	115200
Protocol	UBX
Antenna	ceramic
Output frequency	10Hz
Frequency	GPS L1, GLONASS G1, BDS B1, GALILEO E1, QZSS L1, SBAS L1, IRNSS
Power input	3.6–5.5V
Acceleration	4G
Speed	500 m/s
Size	21.2 x 21.2 x 8.2mm
Weight	7.9g
Operating temperature	-40°C to +85°C
Storage temperature	-40°C to +105°C

Compatibility

Connector: SH1.0 6-pin cable included - plugs into FCs with a 6-pin GPS port, or solder to UART (TX/RX) and I2C (SDA/SCL) pads.
Chip: not a u-blox M10 - it speaks the UBX protocol and works with Betaflight, INAV and ArduPilot set to UBLOX. Includes IRNSS / NavIC (India's constellation).
Power: 3.6-5.5V - use a 5V pad, not 3.3V.
Size: 21 x 21mm, 7.9g - 3.5-5" builds.