GEPRC TAKER S100 8S BLS 100A ESC
With Case
Rs. 4,999.00
Skip to product information
GEPRC TAKER S100 8S BLS 100A ESC
Rs. 4,999.00
The GEPRC TAKER S100 8S BLS 100A is a single high-current ESC for large multirotors, X-class builds and heavy-lift platforms running 3–8S. This is the case version: the ESC comes with a moulded, ventilated PC case that protects it while helping it shed heat.
Features
- 100A continuous on 3–8S
- Built-in MOSFET heatsink for high-current cooling
- BLHeli_S and Bluejay firmware support
- Moulded, ventilated top and bottom case
Specifications
| Input | 3–8S LiPo |
|---|---|
| Continuous / burst current | 100A / 105A (5s) |
| Protocols | DShot150/300/600 |
| Firmware | BLHeli_S / Bluejay |
| Current sensor | not supported |
| ESC size | 32.5 x 55mm; mounting holes 29.6 x 48.5mm |
| Case size | 36 x 76mm (PC) |
| Weight | 73.2g with case (13.7g bare) |
Compatibility
- Single ESC - one per motor, not a 4-in-1. For a quad you need four (or six for a hex), plus a power distribution board.
- Not a stack board: mounting is 29.6 x 48.5mm, not 30.5 x 30.5mm.
- No current sensor - add one on the PDB if you need current telemetry.
- Assembly: case, board and wires ship separately and need soldering.
- Motors: large 3115 / 4214 / 5215-class motors on 6-8S.
Works with (available at AeroFlow)
- Power distribution: GEPRC PDB Hexacopter, TBS Lucid PDB 500A
- Motors: GEPRC EM4214 660KV, iFlight XING-E 5215, GEPRC EM3115
- Flight controller (8 outputs): GEPRC TAKER H743, Matek H743-SLIM V4
In the box
- 1x TAKER S100 8S BLS 100A ESC with top and bottom case
- 1x 50V 2200µF capacitor
- 2x 10AWG silicone power leads (240mm)
- 1x 2-pin Dupont signal cable (150mm)
- 8x M2x7 case screws