GEPRC PDB Hexacopter Power Distribution Board
Rs. 1,999.00
Skip to product information
GEPRC PDB Hexacopter Power Distribution Board
Rs. 1,999.00
The GEPRC PDB Hexacopter is a six-channel power distribution board for hexacopters running six separate ESCs. It carries pack power to each ESC, passes the six signal lines through from the flight controller and includes an on-board current meter. It is not a flight controller or an ESC.
Features
- 6 output channels for individual ESCs
- 60A continuous / 80A burst per channel (360A / 480A total)
- On-board current meter
- DShot150/300/600 signal pass-through
- XT90+ power input with 10AWG leads
- Plug-in FC connection cable
Specifications
| Input | 3-8S LiPo |
|---|---|
| Current | 60A continuous, 80A burst per channel |
| Mounting | 30 x 30mm |
| Size | 53 x 53mm |
| Weight | 11.8g |
| Board marking | HEX X PDB V1.0; pads CUR, S1–S6, BAT, GND |
Compatibility
- Needs: six individual ESCs and a flight controller with at least 6 motor outputs.
- Mounting is 30 x 30mm, not the common 30.5 x 30.5mm - check your frame.
- Not a 4-in-1 stack: it carries power and signals only.
Works with (available at AeroFlow)
- Single ESCs: GEPRC TAKER S100 100A, TBS Lucid 12S 90A
- Flight controllers (6+ outputs): GEPRC TAKER H743, Matek H743-SLIM V4, MicoAir743 V2
In the box
- 1x hexacopter power distribution board
- 2x 50V 2200µF capacitors
- 2x XT90+ connectors with protective housing and 10AWG silicone wire
- 1x SH1.0-10P to 8P FC-to-PDB cable
- 8x M3x8 damping balls