TBS M10 GPS Glonass Module
Rs. 1,699.00
Skip to product information
TBS M10 GPS Glonass Module
Rs. 1,699.00
The TBS M10 GPS Glonass is Team BlackSheep's standard-size GPS module, built on the u-blox UBX-M10050 chipset. It delivers fast, stable satellite locks for GPS Rescue, Return-to-Home and OSD telemetry on FPV and long-range builds.
Onboard flash memory saves your configuration permanently, and high tracking sensitivity of -166dBm keeps the lock solid in challenging environments.
Specifications
| Chipset | u-blox UBX-M10050 |
|---|---|
| Configuration storage | Onboard flash memory |
| Frequency | L1 1575.42MHz; L2 1561.10MHz; L3 1602.00MHz |
| Baud rate | 4800bps–921600bps, default 115200bps |
| Sensitivity | tracking -166dBm; capture -160dBm; cold start -148dBm |
| Cold start | average 26 seconds |
| Warm start | average 24 seconds |
| Hot start | average 1 second |
| Accuracy | horizontal position autonomous <2m average; SBAS <2.0m average; timepulse RMS 30ns |
| Maximum height | 50,000m |
| Maximum speed | 500 m/s |
| Maximum acceleration | ≤4G |
| Refresh rate | 0.25Hz–18Hz, default 1Hz |
| Size | 18 x 18 x 8.1mm |
| Weight | 8.5g |
| Input voltage | 5V |
Compatibility
- GPS only - no compass. Fine for Betaflight GPS Rescue and OSD; for INAV / ArduPilot navigation modes that need heading, pick a module with a compass such as the TBS M10Q.
- Wiring: TX/RX to a free FC UART (crossed), 5V and GND.
- Firmware: Betaflight 4.3 or newer, INAV, ArduPilot. Default refresh is 1Hz - the flight controller normally reconfigures it on boot.
- Size: 18 x 18mm, 8.5g - fits 3.5-5" builds.
Works with (available at AeroFlow)
- FC / stacks: SpeedyBee F405 V5, SpeedyBee F405 Mini, GEPRC TAKER F722 BT
- Receiver: RadioMaster RP4TD-M