TBS Lucid Wing PDB

Rs. 2,099.00

Specifications

Voltage range	Up to 60V (14S)
Mount pattern	20 x 20mm or 30.5 x 30.5mm FC
Compatibility notes	Fixed-wing power distribution board for up to four servos and one or two motors. Works with 20x20 and 30.5x30.5 FCs (TBS Lucid H7 or Lucid 20x20 recommended). 12V 4A rail for FC, LEDs and accessories; 6V 4A servo rail. Up to 60V (14S) input. Current sensor 90A continuous / 200A burst. FC supply switchable between VBat and 12V. Onboard plugs for analog camera, analog VTX, 12V COB LEDs and TBS M10 GPS. Supports BLHeli/AM32 ESC telemetry.
In the box	1x TBS Lucid Wing PDB 1x FC peripheral cable set 1x servo pin header set (2x20) 1x hardware kit

The TBS Lucid Wing PDB is a power distribution board for fixed-wing builds with up to four servos and one or two motors. It works with 20x20 and 30.5x30.5 flight controllers (TBS Lucid H7 or Lucid 20x20 recommended), provides dedicated 12V and 6V servo rails, and handles up to 14S input.

Features

12V 4A rail for FC, LEDs and accessories
6V 4A rail for servos
Up to 60V (14S) input
Current sensor: 90A continuous, 200A burst
Switchable FC supply: VBat or 12V
Onboard plugs for analog camera, analog VTX, 12V COB LEDs and TBS M10 GPS
Supports BLHeli/AM32 ESCs with telemetry

Compatibility

For planes and wings - up to four servos (6V rail) and one or two motor ESCs.
Servos: the servo rail is 6V - make sure your servos are rated for 6V.
Flight controller: 20x20 or 30.5x30.5 FCs; TBS Lucid H7 recommended. Switch the FC supply to 12V if your FC is not rated for full pack voltage.
Current sensor: 90A continuous - for higher-current planes use the Lucid H7 Wing FC (165A sensor).