RCinPower GTS V3 1303 Motor
6000KV / Gold & Orange
Rs. 1,699.00
Skip to product information
RCinPower GTS V3 1303 Motor
Rs. 1,699.00
The RCinPower GTS V3 1303 Plus is a micro brushless motor for lightweight 2-3" cinewhoops and toothpicks. A 12N14P layout on a 13 x 3.2mm stator gives smooth, torquey response at just 5.6g including leads. It comes in three KVs so you can match it to your battery: 6000KV, 8000KV and 11500KV, all in the Gold and Orange colourway.
Choose your KV
- 6000KV: 3-4S. Torquey and efficient for heavier 3" cinewhoops.
- 8000KV: 2-3S. The all-rounder for light 2-3" builds.
- 11500KV: 1-2S. Snappy throttle for ultralight low-cell toothpicks and whoops.
Features
- Built for 2-3" cinewhoops and toothpicks
- 12N14P configuration for smooth low-end torque
- Light 5.6g including 5cm leads
- Gold and Orange colourway
Specifications
| KV | 6000 / 8000 / 11500 |
|---|---|
| Cells | 3-4S / 2-3S / 1-2S |
| Configuration | 12N14P |
| Stator | 13 x 3.2mm |
| Shaft | 1.5mm |
| Motor dimensions | 16.5 x 10.1mm |
| Weight | 5.6g (5cm wire) |
6000KV figures: internal resistance 166mΩ, idle current 0.7A (5V), max current 16.9A and max power 250W on 3S. RCinPower does not publish these for the 8000KV and 11500KV.
Compatibility
- Battery: pick the KV for your cell count. Running a higher KV on more cells than listed overloads the motor.
- Shaft 1.5mm: 2-3" props with 1.5mm holes or T-mount. 1.0mm-hole props will not fit.
- ESC: 17A+ per motor for the 6000KV on 3S.
- Mount: pattern not stated by RCinPower, so check against your frame.
Works with (available at AeroFlow)
- Frame: HGLRC Talon
- Props (1.5mm): HQProp T2.2x1.6x3
- AIO: GEPRC TAKER G4 45A, Flywoo GN745, HDZero AIO15 (2-3S), Flywoo GOKU F405 HD 1S
- Battery: BETAFPV LAVA 2S XT30
In the box
- 1x RCinPower GTS V3 1303 motor (KV as selected)