Flywoo GOKU F405 HD 1S 12A AIO w/ TCXO ELRS
Rs. 7,999.00
Skip to product information
Flywoo GOKU F405 HD 1S 12A AIO w/ TCXO ELRS
Rs. 7,999.00
The Flywoo GOKU F405 HD 1S 12A AIO is a 1S all-in-one board built for DJI O4 and O4 Pro tiny whoops and 3-inch toothpicks. It combines an STM32F405 flight controller, a 12A Bluejay ESC and a TCXO ExpressLRS 2.4GHz receiver, with a dual BEC (9V 2A and 5V 3A) to keep the air unit powered through hard manoeuvres.
Features
- Plug and play with DJI O4 / O4 Pro, plus O3, Walksnail Avatar and HDZero
- Dual BEC: 9V 2A and 5V 3A
- 12A continuous / 15A peak 1S ESC
- TCXO ELRS 2.4GHz receiver
- Solder-free JST1.25 motor sockets, USB-C
- For 40mm whoops to 3-inch frames on 0802–1303 motors
Specifications
| MCU | STM32F405 BGA |
|---|---|
| Gyro | ICM42688P |
| Barometer | SPL06 |
| Blackbox | none onboard (external supported) |
| OSD | not supported |
| UARTs | 2, 3 (ELRS), 4, 5 (SBUS), 6 |
| Receiver | Flywoo TCXO EL24E 2400 RX 3.x.x |
| Firmware | Betaflight FLYWOOF405S_AIO; INAV FLYWOOF405HD |
| ESC | 1S only, 12A continuous / 15A peak, Bluejay O_H_5_48KHz_V0.19, DShot300/600 |
| Connectors | JST1.25 motors, A30 battery |
| Size | 30.5 x 30.5 x 10mm; mounting 25.5 x 25.5mm |
| Weight | 3.4g |
Compatibility
- Battery: 1S only, with an A30 connector. BT2.0 packs need an adapter or a pigtail swap.
- Video: digital only - no analog OSD chip.
- Frame: 25.5 x 25.5mm whoop / toothpick mount, 0802-1303 motors with JST1.25 plugs.
- Not the same board as Flywoo's 1S 5A V2 or 1-2S 12A V2 AIOs.
Works with (available at AeroFlow)
- Motors: Flywoo ROBO 1003 14800KV
In the box
- 1x GOKU F405 HD 1S 12A AIO
- 1x Flywoo ELRS 2.4G Minimortal PCB T antenna (UFL, 40mm)
- 5x M2x6.6 shock-absorbing balls
- 1x cable for blackbox / GM10 GPS Nano
- 1x A30 power cable
- 1x O4 / O4 Pro cable