Skip to product information

HGLRC M100-5883 GPS Module with QMC5883L Compass
Rs. 1,699.00
Specifications
| Part number | M100-5883 |
|---|---|
| Weight (g) | 7.73 |
| Dimensions (mm) | 21 x 21 x 8 |
| Voltage range | 3.3-5V |
| Connector | SH1.0 6-pin |
| Frequency | GPS L1, GLONASS L1, BDS B1, Galileo E1, QZSS L1, SBAS L1 |
| Compatibility notes | Compact flight-controller GPS with a QMC5883L compass, for FPV quads and fixed wings. u-blox M10 chip, ceramic antenna, 72 channels, 10Hz. UBLOX protocol at 115200bps. Input 3.3-5V. Cold start about 29s, hot start 1s. |
The HGLRC M100-5883 is a compact GPS module built on the 10th-generation u-blox M10 chip with an integrated QMC5883L compass. A ceramic antenna and 72 receive channels give fast positioning with a stable signal, at a 10Hz output rate. Well suited to FPV quadcopters and fixed-wing UAVs.

Technical parameters
| Chip | M10 (10th generation) |
|---|---|
| Antenna | ceramic |
| Frequency | GPS/QZSS L1C/A; SBAS EGNOS, GAGAN, MSAS and WAAS; GLONASS L1OF; BDS B1I; Galileo E1B/C |
| Receive channels | 72 |
| Baud rate | 115200bps |
| Output protocol | UBLOX |
| Output frequency | 10Hz |
| Power input | 3.3–5V |
| Sensitivity | tracking and navigation -166dBm; reacquisition -160dBm; cold start -148dBm |
| First fix | cold start 29s, hot start 1s |
| Speed accuracy | 0.05 m/s |
| Time pulse accuracy | RMS 30ns, 99% within 60ns |
| Operating limits | ≤4g, altitude 80,000m, speed 500 m/s |
| Size | 21 x 21 x 8.02mm |
| Weight | 7.73g |
Compatibility
- Wiring: TX/RX to a free FC UART (crossed), 5V and GND; compass on the FC's I2C pads (SDA/SCL).
- Firmware: Betaflight 4.3 or newer (required for M10 chips), INAV, ArduPilot.
- Size: 21 x 21mm, 7.7g - 3.5-5" builds and small fixed-wing.
Works with (available at AeroFlow)
- FC / stacks: SpeedyBee F405 V5, GEPRC TAKER F722 BT, Foxeer F722 V4
- Upgrade: HGLRC M100 PRO (120ch)
Notes: use Betaflight 4.3.0 firmware or above — older versions do not recognise the 10th-generation chip. Install with the antenna facing up and away from motors, power lines and other sources of interference. Default constellation set is GPS+Galileo+QZSS+SBAS; BDS cannot be enabled simultaneously.