Goosky S2 MAX Helicopter
BNF / Blue
Rs. 48,999.00
Skip to product information
Goosky S2 MAX Helicopter
Rs. 48,999.00
The Goosky S2 MAX is the refined, more powerful version of Goosky's 3S micro 3D helicopter, the result of three years of development on the original S2. A new high-power-density brushless direct-drive motor, a separate flight controller and ESC, and redesigned main and tail rotors give it sharper, more precise handling. At 444mm rotor diameter and about 360g it is big enough to be stable and visible outdoors, yet small enough to fly in a park.
Choose RTF to get everything you need in one box including the transmitter and charger, or BNF if you already own a compatible radio and LiPo charger.
Why pilots choose the S2 MAX
- Direct-drive power: new brushless direct-drive main motor with about 20% more output, and no gears or belts to wear out or adjust
- Precise flight control: new flight controller with 50% higher resolution, paired with a separate split-type ESC for clean, reliable power
- Wide radio support: built-in S-FHSS receiver for the Goosky T8, plus S-BUS, PPM and DSM-X input and ELRS with telemetry through an external receiver
- Easier maintenance: redesigned airframe uses about 30% fewer screws, so crash repairs and part swaps are quicker
- Stronger airframe: carbon-plastic side panels, integrated ESC terminals and a newly designed landing skid
- Quick battery swaps: tool-free battery change without removing the canopy; 7.4V BEC keeps servos and electronics on stable power
- Tune from your phone: adjust settings through the Goosky app over the included Bluetooth module
RTF or BNF?
- RTF (Ready-to-Fly): helicopter with pre-installed split-type ESC (XT30), Goosky T8 transmitter with battery, charger, 3S 750mAh flight battery, EPP carrying case, Bluetooth tuning module, spare screws, 3x spare servo arms, spare main shaft and spare horizontal axis. Available in Blue or Orange.
- BNF (Bind-and-Fly): helicopter with pre-installed split-type ESC (XT30), 3S 750mAh flight battery, EPP carrying case, Bluetooth tuning module, spare screws, 3x spare servo arms, spare main shaft and spare horizontal axis. Transmitter and LiPo charger not included. Available in Blue or Orange.
Specifications
| Length / width / height | 440mm / 74mm / 138mm |
|---|---|
| Take-off weight | approx. 360g |
| Main rotor diameter | 444mm |
| Main blade length | 195mm |
| Tail rotor diameter | 88.5mm |
| Motors | brushless direct-drive (main and tail) |
| ESC | split-type, separate from flight controller, XT30 connector |
| BEC | 7.4V |
| Rotor head | flybarless, collective pitch |
| Receiver | built-in S-FHSS; S-BUS, PPM and DSM-X compatible; ELRS with telemetry via external receiver |
| Battery | 3S 11.1V 750mAh LiPo (8.325Wh), XT30 |
| Flight time | approx. 10 minutes regular / 4 minutes aggressive 3D |
| Channels | 6 |
Choosing BNF? You need a radio that can bind to the S2 MAX, either directly (S-FHSS) or through an S-BUS, PPM, DSM-X or ELRS receiver, plus a 3S LiPo balance charger. Message us with your radio model and we'll confirm what you need before you order.
The S2 MAX is a collective-pitch 3D helicopter. If you are new to helis, practise on a simulator first and fly in an open, legal area. RC helicopters should be flown by adults or under experienced guidance.