GEPRC TAKER F722 BT 8Bit 60A Stack
Rs. 8,449.00
Skip to product information
GEPRC TAKER F722 BT 8Bit 60A Stack
Rs. 8,449.00
Specifications
| Part number | GP107549 |
|---|---|
| Weight (g) | 23.1 |
| Dimensions (mm) | FC 36.9 x 36.9, ESC 42 x 45.7 |
| Cell count | 3S, 4S, 5S, 6S |
| Voltage range | 3-6S LiPo |
| Mount pattern | 30.5 x 30.5mm, 4mm holes (3mm with the silicone grommets fitted) |
| Stack size | 30.5 x 30.5mm |
| Output power | ESC 60A continuous, 65A burst (5s); FC BEC 5V/3A and 9V/2.5A |
| Compatibility notes | Flight controller (GEP-F722-BT-HD V3): STM32F722, ICM42688-P gyro, barometer, 512MB onboard blackbox, Betaflight OSD with AT7456E, USB-C, integrated LC power filter, dual BEC 5V/3A and 9V/2.5A. Betaflight target GEPRCF722_BT_HD_V3. 8.2g. Bluetooth tuning built in, so Betaflight settings can be changed from a phone without a USB cable. 5 UARTs, with UART4 permanently reserved for the Bluetooth module. ESC: 8-bit BLHeli_S firmware (the 50A version of this stack is the 32-bit BLHeli_32 board instead), DShot150/300/600, ammeter supported. Direct plug connection for the DJI Air Unit. |
The GEPRC TAKER F722 BT 8Bit 60A Stack combines an F722 flight controller with a 60A 4-in-1 ESC for 3–6S 5" builds. It has an ICM42688-P gyro, barometer and 512MB blackbox, and plugs straight into a DJI air unit.
Features
- STM32F722 MCU with ICM42688-P gyro
- 512MB onboard blackbox and barometer
- Dual independent BEC
- Direct-plug DJI air unit connection, integrated LC filter, Type-C USB
Flight controller (GEP-F722-BT-HD V3)
| MCU | STM32F722 |
|---|---|
| Gyro | ICM42688-P |
| OSD | Betaflight OSD (AT7456E) |
| UARTs | 5 |
| Input | 3–6S LiPo |
| Mounting | 30.5 x 30.5mm |
| Size | 36.9 x 36.9mm |
| Weight | 8.2g |
| Firmware target | GEPRCF722_BT_HD_V3 |
ESC (TAKER H60_BLS 60A 4-in-1)
| Continuous / burst current | 60A / 65A (5s) |
|---|---|
| Input | 3–6S LiPo |
| Protocols | DShot150/300/600 |
| Current sensor | yes |
| Mounting | 30.5 x 30.5mm |
| Size | 42 x 45.7mm |
| Weight | 14.9g |
Compatibility
- Frame: 30.5 x 30.5mm stack - 5"-7" frames.
- Battery: 3-6S; XT90 lead included (swap to XT60 if your packs use it).
- ESC firmware: 8-bit BLHeli_S - choose the 32-bit 50A version if you want BLHeli_32 and higher PWM frequencies.
- Video: DJI O3 / O4 Pro plug-in or analog. Receiver: not included.
Works with (available at AeroFlow)
- Frames: GEP-MK5 O4 Pro DC, GEP-Vapor-D5, Mark4-7
- Motors: GEPRC SPEEDX2 2207E, RCinPower Supernova 2207
- Receiver: RadioMaster RP2 V2; GPS: GEP-M10-DQ
Note: GEPRC states that Bluetooth parameter tuning is not available on the current production batch.
In the box
- 1x flight controller and 1x 60A 4-in-1 ESC
- 1x capacitor
- DJI O3 cable, FC adapter, receiver, camera and VTX cables
- 1x XT90 power lead
- Mounting screws, nylon nuts and silicone grommets