Caddx Gazer FPV Camera
Sealed Box
Rs. 9,999.00
Skip to product information
Caddx Gazer FPV Camera
Rs. 9,999.00
The Caddx Gazer is a full-colour night vision analog FPV camera — instead of dropping to grainy black and white after dark, it keeps bright, true colour in near-darkness. A 1/1.8" 2MP sensor with an F1.0 aperture gathers the light, and an on-board AI image processor lifts brightness, cuts noise and restores natural colour as conditions change.
It also does something no ordinary FPV camera does: 3x zoom, controlled from your flight controller over PWM, with no visible distortion — useful for picking out distant targets on long-range and inspection flights. The IR filter is manually removable, so you fit it for accurate daytime colour and pull it off at night for maximum light intake, with Day/Night mode switched from the FC.
Features
- Ultra-low illumination full-colour night vision
- AI image quality enhancement — dynamic brightness, noise reduction, true colour
- 3x zoom controlled from the flight controller (PWM), stable and distortion-free
- Manually removable IR filter with FC-switched Day/Night modes
- 1500TVL horizontal resolution from a 1/1.8" 2MP sensor
- Bright F1.0 aperture, 131.6° FOV
- Works with any standard analog VTX — quads, wings, RC cars, ground setups
- Low power draw under 2W
Specifications
| Model | Caddx Gazer |
|---|---|
| Image sensor | 1/1.8 inch |
| Sensor resolution | 1920 x 1080 (2MP); output 720 x 576 |
| Horizontal resolution | 1500TVL |
| Focal length | 2.8mm |
| Aperture | F1.0 |
| FOV | 131.6° |
| Filter | manually removable |
| Output format | PAL |
| Frame rate | 50fps |
| Magnification | 3x (zoomed via FC) |
| Day/Night | switched by FC — filter on + D mode by day, filter off + N mode at night |
| Aspect ratio | 4:3 |
| Video interface | 1 x PAL |
| Supply voltage | 9–24V |
| Typical power consumption | <2W |
| Operating temperature | -20°C to 60°C |
| Dimensions | camera 20 x 20 x 28.54mm; AI box 34 x 34 x 8.65mm |
| SKU | MN12-0014B |
Compatibility
- Power: 9-24V only - not a 5V camera pad. Use the FC's 9V/10V pad, or battery voltage up to 5S; use a BEC on 6S.
- PAL output only - set your goggles / VRX to PAL or auto. Betaflight OSD must also be set to PAL.
- Zoom and Day/Night are switched by spare FC outputs (PWM) mapped to radio switches.
- Space: 20mm camera mount, 28.5mm deep; the 34mm AI box needs its own spot (a 30.5 stack-sized space).
- Analog only - not for DJI, Walksnail or HDZero.
Works with (available at AeroFlow)
- Analog VTX: GEPRC MATEN 5.8G 5W Pro
- Frames: HGLRC MY10
- Night camera alternative: Caddx Infra V2 (B&W)
In the box
- 1 x Gazer camera (with AI box)
- 1 x 6-pin silicone cable
- 1 x 3-pin silicone cable
- 1 x Screw kit
- 1 x Product manual
Note: the Gazer ships as camera + AI box; no VTX is included.