VIFLY Cam Switcher
Rs. 799.00
Skip to product information
VIFLY Cam Switcher
Rs. 799.00
The VIFLY Cam Switcher lets you fly with two FPV cameras on one quad or plane and switch between them from a switch on your radio. It reads a channel straight from your receiver (PWM, SBUS, IBUS or DSMX), so there is nothing to configure in Betaflight. At 9 x 18mm and 0.5g it is small and light enough for high-performance racing quads, and it runs on anything from 4.2V to 25V.
Key features
- Switch between two FPV cameras from your transmitter
- Works with PWM, SBUS, IBUS or DSMX receiver signals
- Simple setup - no Betaflight configuration needed
- Suits racing quads and FPV airplanes - e.g. a forward camera and a downward or rear-view camera
- Tiny and light: 9 x 18mm, 0.5g
- Wide 4.2-25V input
Specifications
| Camera inputs | 2 |
|---|---|
| Control signal | PWM / SBUS / IBUS / DSMX |
| Input voltage | 4.2-25V |
| Size | 9 x 18 mm |
| Weight | 0.5 g |
Compatibility
- For analog cameras: it switches the analog video signal between two cameras into one analog VTX. It is not for DJI, Walksnail or HDZero digital systems.
- ExpressLRS users: ELRS receivers normally output CRSF, which VIFLY does not list as supported. Use a spare PWM output instead, for example on a RadioMaster ER-series PWM receiver.
Works with (available at AeroFlow)
- Analog cameras: Caddx Ratel Pro, CaddxFPV Ant, Axisflying Owl Black Light, Caddx Farsight
- PWM receivers: RadioMaster ER4, ER6, ER8
In the box
- 1 x VIFLY Cam Switcher
- 1 x set of silicone wires (red, black, yellow, white)
- 1 x heat shrink tube