MadMotor KONKER 2267 R4 Motor
2150KV
Rs. 2,999.00
Skip to product information
MadMotor KONKER 2267 R4 Motor
Rs. 2,999.00
The KONKER 2267 2150KV is a 6S racing motor from KONKER, the dedicated racing line of MAD Components. A 22 x 6.7mm stator and 2150KV winding are tuned for maximum output on 6S, producing up to 2200g of thrust from a 26g motor for hard acceleration and sharp throttle response in 5-inch race builds.
Key features
- 2150KV winding tuned for 6S (22.2V) race setups
- Up to 2200g (2.2 kgf) max thrust at 26g, about 84.6:1 thrust-to-weight
- 240°C copper winding holds power through back-to-back heats
- 180°C magnets resist demagnetisation at sustained full throttle
- CNC-machined, dynamically balanced bell for low vibration and a clean FPV feed
Specifications
| Model | KONKER 2267 |
|---|---|
| KV | 2150KV |
| Stator size | 22 x 6.7mm |
| Weight | 26g (without cable) |
| Recommended battery | 6S LiPo (22.2V) |
| Max thrust | 2200g (tested on 5.1x3.6 props) |
| Recommended props | 5-inch, e.g. Gemfan Hurricane 51366 or 51466 |
| Winding temperature resistance | 240°C |
| Magnet temperature resistance | 180°C |
Compatibility
- 6S race builds only - MAD recommends a higher-KV motor for 4S.
- ESC: 55A+ per motor for racing on 6S.
- Mount: pattern not stated - check against your frame before ordering.
Works with (available at AeroFlow)
- Race frame: HGLRC Wind5 Lite V2 (confirm mount)