GEPRC TAKER F722 45A 32Bit AIO
Rs. 8,599.00
Skip to product information
GEPRC TAKER F722 45A 32Bit AIO
Rs. 8,599.00
The GEPRC TAKER F722 45A 32Bit AIO combines an STM32F722 flight controller and a 45A 32-bit 4-in-1 ESC on one 25.5x25.5mm board for 2-6S builds. A 6-pin port on the underside takes an HD VTX by direct plug, and the 32-bit ESC firmware gives smooth throttle response.
Features
- 2-6S input, 45A continuous / 55A burst (10 s)
- STM32F722 with ICM-42688-P gyro
- 16MB onboard blackbox
- 6-pin bottom port for plug-in HD VTX, no soldering
- 5 full UARTs, buzzer and LED support, OSD tuning
Specifications
| MCU | STM32F722 |
|---|---|
| Gyro | ICM-42688-P (SPI) |
| Firmware target | GEPRC_F722_AIO |
| Blackbox | 16MB |
| OSD | Betaflight OSD (AT7456E) |
| UARTs | R1/T1 to R5/T5 |
| USB | Type-C |
| BEC | 5V 1A |
| ESC | 32-bit, 45A continuous, 55A burst |
| Protocols | DShot600, OneShot, MultiShot |
| Input | 2-6S LiPo |
| Size | 35 x 33.5mm |
| Mounting | 25.5 x 25.5mm (M3, reduced to M2 with dampers) |
| Weight | 9.2g |
Compatibility
- Frame: 25.5 x 25.5mm AIO mount - 2.5-3.5" cinewhoops and micro freestyle frames. It will not bolt onto 20x20 or 30.5x30.5 stack holes.
- BEC is only 5V 1A. A DJI O4 / O4 Pro needs 9-12V - power it from VBAT (if the air unit accepts pack voltage) or a separate BEC such as the iFlight BLITZ BEC.
- Battery: 2-6S, XT30 lead included. Receiver: not built in.
Works with (available at AeroFlow)
- Frames: GEPRC CL30 V3, GEPRC CL35 V3, GEPRC CT35
- Motors: GEPRC SPEEDX2 1404, SPEEDX2 2105.5
- Extra BEC for HD: iFlight BLITZ BEC V1.1
In the box
- 1x TAKER F722 45A AIO
- 1x XT30 18AWG power lead (7cm)
- 1x 35V 220µF capacitor
- 1x SH1.0 6-pin to GH1.25 8-pin adapter cable
- 1x SH1.0 6-pin cable
- 8x M2 x 6.5mm damping grommets