GEPRC ELRS 915M/2.4G Gemini Xrossband Receiver

GEPRC ELRS 915M/2.4G Gemini Xrossband Receiver

Rs. 2,999.00
Skip to product information
GEPRC ELRS 915M/2.4G Gemini Xrossband Receiver

GEPRC ELRS 915M/2.4G Gemini Xrossband Receiver

Rs. 2,999.00
Share on WhatsApp

The GEPRC ELRS 915M/2.4G Gemini Xrossband Receiver is an ExpressLRS dual-band receiver built on two of Semtech's third-generation LR1121 RF chips. It can run 915MHz Gemini, 2.4GHz Gemini, or both bands at once for stronger interference rejection, and it works with existing single-band 915MHz and 2.4GHz ELRS transmitters.

GEPRC ELRS 915M/2.4G Gemini Xrossband Receiver

Features

  • Dual LR1121 chips: 915M Gemini, 2.4G Gemini, or 915M+2.4G dual-band
  • Dual-band mode needs a dual-band TX module and 915M/2.4G antennas
  • TCXO for stable performance across temperatures
  • Telemetry up to 100mW; refresh rate up to 1000Hz
  • Wi-Fi firmware updates
  • Compact: 18 x 23.6 x 5.7mm, 1.7g
GEPRC ELRS 915M/2.4G Gemini Xrossband Receiver

Specifications

Chips ESP32-PICO-D4, 2x LR1121
Oscillator TCXO
Refresh rate 25–1000Hz
Operating voltage 5V
Antenna connector IPEX1
Telemetry power 100mW
Firmware GEPRC 900/2400 Gemini Xrossband RX
Size 18 x 23.6 x 5.7mm
Weight 1.7g (receiver only)

Compatibility

  • 2.4GHz: works with any ELRS 2.4GHz radio. Dual-band needs a dual-band transmitter: GX12, TX16S MK3 or the Nomad module.
  • In India: the licence-free sub-GHz band is 865-867MHz. Flash radio and receiver to the ExpressLRS IN866 domain before using the 900MHz side.
  • Wiring: 4-pin cable to an FC UART (RX to TX, TX to RX), 5V. Serial RX, CRSF.

Works with (available at AeroFlow)

In the box

  • 1x ELRS 915M/2.4G Gemini Xrossband receiver
  • 2x 915M/2.4G dual-band T antennas
  • 1x heat-shrink tube
  • 1x 4-pin silicone cable
  • 1x user manual

You may also like