BETAFPV LAVA II 3S 95C LiHV Battery XT30

BETAFPV LAVA II 3S 95C LiHV batteries, sold as a pair, in 580mAh or 680mAh. LAVA II's upgraded core material lifts the discharge rate to 95C (up from 75C on original LAVA) and adds 5.5-7.7% capacity in the same footprint, while BETAFPV's Z-Folding cell construction gives higher energy density, a steadier voltage under load and longer cycle life than wound cells. Choose the capacity above: 580mAh is the lighter pack, 680mAh gives up to 9 minutes of hover on the Pavo20 Pro II (BETAFPV test, full charge to 3.4V/cell).

Specifications

• Cells: 3S LiHV, 11.4V nominal, 95C
• Max voltage: 4.35V per cell; storage 3.8-3.9V per cell
• Discharge connector: XT30 with 18AWG silicone wire
• Balance plug: JST-XH2.54

Compatibility

• Fits: 3S 2-2.5" cinewhoops with an XT30 lead - BETAFPV's recommended pack for the 3S Pavo20 Pro II.
• Do not use on: 4S-tuned builds (they will feel underpowered) or 1-2S boards.
• Charging: LiHV-capable charger set to 3S (4.35V/cell). LiPo mode (4.2V) is safe but leaves capacity unused.

Works with (available at AeroFlow)

• Drone / frame: Pavo20 Pro II, Pavo20 Pro II frame
• Motors / FC: LAVA 1104 7200KV
• Charging: HOTA D6 Pro

See the BETAFPV whoop fitment chart.

In the box

• 2x LAVA II 3S battery (580mAh or 680mAh, per selected variant)

Safety

• Fully charge new packs before first use; charge only with a LiPo/LiHV charger and never leave charging unattended
• Never discharge below 3.0V per cell under load
• Do not store fully charged for more than 3 days; do not use swollen or damaged packs