Axisflying Thermal Camera

Rs. 39,999.00

Specifications

Voltage range	6-24V
Compatibility notes	256x192 VOx uncooled thermal camera module for FPV drones. Analog CVBS PAL output - for analog VTXs. 8-14um, NETD under 50mK, 25Hz, manual focus. Detection range up to about 642m (person) / 944m (vehicle). 6-24V, 0.4W.

The Axisflying Thermal Camera is a compact thermal imaging module for FPV drones, drone pods and other intelligent equipment. A high-sensitivity vanadium oxide (VOx) uncooled detector gives clear heat detection with analog video output, so it plugs straight into a standard analog FPV system. Axisflying makes it in 256x192, 384x288 and 640x512 resolutions; AeroFlow stocks the 256x192 version.

Axisflying Thermal Camera 256x192 detail

Specifications (256x192)

Detector material	Vanadium Oxide (VOx), uncooled
Resolution	256x192
Pixel size	12µm
Spectral response band	8–14µm
NETD	<50mK @25°C
Frame rate	25Hz
Focus mode	Manual
Operating voltage	6V–24V
Power consumption	0.4W (6V/80mA)
Video format	PAL, analog CVBS output
Detection range	Humans up to 642m, vehicles up to 944m

Features

High-sensitivity vanadium oxide uncooled detector
Analog signal output
Supports automatic, manual and background correction
Small module design, easy to integrate into drone pods and intelligent equipment

Compatibility

Analog PAL output - plugs into any analog VTX (camera input). Set goggles and FC OSD to PAL. Not for DJI, Walksnail or HDZero.
Power: 6-24V - FC 9V pad or battery voltage up to 5S; use a BEC on 6S.
Thermal only (25Hz) - for flying in daylight you'll want a normal camera too; the Dual Thermal combines both.
Size and weight are not published by Axisflying - contact info@aeroflow.in to confirm mounting before ordering.