{"title":"TBS","description":"\u003cp\u003eTBS (Team BlackSheep) makes long-range FPV radio, video and flight gear, known for its Crossfire control link, Unify video transmitters, Lucid electronics and the open-source Source One frame.\u003c\/p\u003e\u003cp\u003eWe stock TBS Unify Pro and Pro32 VTX; 5G8 linear and patch antennas and the Crossfire TX antenna; Lucid H7 and H7 Wing flight controllers, ESCs, stacks and PDBs; M10 series GPS modules and the Lucid DroneCAN airspeed sensor; the Source One frame; Mojito and Chupito FPV wings; plus TBS solder, flux, the Sexy Driver kit and Ummagrip battery pad.\u003c\/p\u003e","products":[{"product_id":"tbs-unify-pro-5g8-hv-sma","title":"TBS Unify Pro 5G8 HV SMA","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe TBS Unify Pro 5G8 HV (SMA) is Team BlackSheep's high-voltage analog video transmitter, built to run directly from 2S–6S battery power with clean 5V output for the FPV camera — no separate BEC or power filtering board required.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7300562_9f9e2b42-b8a1-4833-8462-53799d46c1c5.jpg\" alt=\"TBS Unify Pro 5G8 HV SMA video transmitter\"\u003e\u003cp\u003eAt just 7g and 31 x 22 x 6mm, it adds almost no weight or bulk. Output power is adjustable from 25mW up to 800mW across 40 channels.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitMode:\u003c\/strong\u003e drops output well below 1mW so you can power up on the grid without interfering with pilots in the air\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmartAudio:\u003c\/strong\u003e control power, band, channel and frequency from the flight controller OSD, a smart device, or your radio with TBS Crossfire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleanSwitch:\u003c\/strong\u003e interference-free power-on and channel changes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7300563.jpg\" alt=\"TBS Unify Pro 5G8 HV SMA top view\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/DSC01127-ga.jpg\" alt=\"TBS Unify Pro 5G8 HV installed\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eVideo system\u003c\/th\u003e\n\u003ctd\u003eAnalog\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e6V–25V (2S–6S)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency band\u003c\/th\u003e\n\u003ctd\u003e5658–5945MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput power\u003c\/th\u003e\n\u003ctd\u003e25 \/ 200 \/ 500 \/ 800mW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChannels\u003c\/th\u003e\n\u003ctd\u003e40CH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVideo format\u003c\/th\u003e\n\u003ctd\u003eNTSC, PAL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePit mode\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSmartAudio\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAntenna connector\u003c\/th\u003e\n\u003ctd\u003eSMA female (u.FL internal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e31 x 22 x 6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e7g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGoggles:\u003c\/strong\u003e any 5.8GHz analog goggle or receiver. Not DJI, Walksnail or HDZero.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna:\u003c\/strong\u003e SMA female on the VTX - use an SMA-male antenna. MMCX or U.FL antennas need an adapter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e no stack holes - it is designed to be fixed with tape or zip ties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlight controller:\u003c\/strong\u003e SmartAudio UART control in Betaflight \/ INAV.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGoggles: \u003ca href=\"\/products\/skyzone-cobra-x-v4-5-8ghz-fpv-goggles\"\u003eSkyzone Cobra X V4\u003c\/a\u003e, \u003ca href=\"\/products\/hdzero-goggle-2-with-echo-antenna-kit\"\u003eHDZero Goggle 2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSMA antennas: \u003ca href=\"\/products\/iflight-albatross-v2-5-8ghz-antenna\"\u003eiFlight Albatross V2 90mm\u003c\/a\u003e, \u003ca href=\"\/products\/iflight-albatross-v2-1-5-8ghz-antenna\"\u003eAlbatross V2.1 130mm\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x TBS Unify Pro 5G8 HV video transmitter\u003c\/li\u003e\n\u003cli\u003e1 x Video transmitter \/ camera \/ power cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eNote: a HAM\/amateur licence may be required to unlock higher power levels and HAM-only channels. Only licence-free channels are enabled by default.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default","offer_id":46417944805410,"sku":"AF-TBS-UNIFY-PRO-5G8","price":5399.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7300562.jpg?v=1787780535"},{"product_id":"tbs-unify-pro32-dp-mmcx","title":"TBS Unify Pro32 DP MMCX","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe TBS Unify Pro32 DP (MMCX) is a 3W wide-band 5.8GHz analog video transmitter built for long-range FPV pilots. Despite the \"DP\" naming, this is an analog VTX — not a digital system. It is the world's lightest 3W video transmitter at just 8.7g.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302729_069f6c12-cad0-4aae-bb35-67d7e56fa39a.jpg\" alt=\"TBS Unify Pro32 DP MMCX video transmitter\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302730.jpg\" alt=\"TBS Unify Pro32 DP top view\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/UP32DP_render-01-1p_woHS.jpg\" alt=\"TBS Unify Pro32 DP render front\"\u003e\u003cp\u003eDouble noise filtering (\u0026gt;63dB SNR) and optimised heat dissipation, and the wide 4990–6030MHz frequency range covers international bands for long-range builds.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eWorld's lightest 3W video transmitter\u003c\/li\u003e\n\u003cli\u003eFrequency range: 4990–6030MHz\u003c\/li\u003e\n\u003cli\u003eOSD configuration via TBS SmartAudio 2.1 (Betaflight, TBS Crossfire\/Tracer, or ArduPilot)\u003c\/li\u003e\n\u003cli\u003eLUA support for CRSF users\u003c\/li\u003e\n\u003cli\u003eMMCX connector, 2S–6S input\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eVideo system\u003c\/th\u003e\n\u003ctd\u003eAnalog\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e6V–25V (2S–6S)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency band\u003c\/th\u003e\n\u003ctd\u003e4990–6030MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput power\u003c\/th\u003e\n\u003ctd\u003e10 \/ 25 \/ 100 \/ 200 \/ 400 \/ 500 \/ 999 \/ MAX mW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVideo format\u003c\/th\u003e\n\u003ctd\u003eNTSC, PAL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePit mode\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSmartAudio\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAntenna connector\u003c\/th\u003e\n\u003ctd\u003eMMCX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e37 x 28 x 10mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e8.7g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGoggles:\u003c\/strong\u003e any 5.8GHz analog goggle on the standard channels. The extended 4990-5645 \/ 5945-6030MHz channels need a wideband receiver - most goggles (Cobra, EV800D) will not see them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot digital:\u003c\/strong\u003e no DJI, Walksnail or HDZero compatibility despite the \"DP\" name.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever power it without an antenna\u003c\/strong\u003e at high power. For full power add the Pro32 DP heatsink if airflow is poor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAntennas: \u003ca href=\"\/products\/tbs-5g8-mmcx-linear-antenna\"\u003eTBS 5G8 MMCX\u003c\/a\u003e, \u003ca href=\"\/products\/foxeer-lollipop-4-antenna\"\u003eFoxeer Lollipop 4\u003c\/a\u003e (MMCX variant)\u003c\/li\u003e\n\u003cli\u003eLong-range goggles: \u003ca href=\"\/products\/hdzero-goggle-2-with-echo-antenna-kit\"\u003eHDZero Goggle 2\u003c\/a\u003e with patch antennas, or \u003ca href=\"\/products\/skyzone-cobra-x-v4-5-8ghz-fpv-goggles\"\u003eCobra X V4\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x TBS Unify Pro32 DP 5G8 HV video transmitter\u003c\/li\u003e\n\u003cli\u003e1 x Silicone cable (ends pre-tinned)\u003c\/li\u003e\n\u003cli\u003e1 x MMCX to SMA pigtail\u003c\/li\u003e\n\u003cli\u003e1 x Heat transfer tape for mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eA HAM\/amateur licence may be required to unlock the highest power levels; only licence-free channels are enabled by default.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default","offer_id":46417946607650,"sku":"AF-TBS-UNIFY-PRO32-DP","price":5999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302729.jpg?v=1787780545"},{"product_id":"tbs-m10-gps-glonass-module","title":"TBS M10 GPS Glonass Module","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe TBS M10 GPS Glonass is Team BlackSheep's standard-size GPS module, built on the u-blox UBX-M10050 chipset. It delivers fast, stable satellite locks for GPS Rescue, Return-to-Home and OSD telemetry on FPV and long-range builds.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302427.jpg\" alt=\"TBS M10 GPS Glonass module view 2\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302429.jpg\" alt=\"TBS M10 GPS Glonass module view 3\"\u003e\u003cp\u003eOnboard flash memory saves your configuration permanently, and high tracking sensitivity of -166dBm keeps the lock solid in challenging environments.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eChipset\u003c\/th\u003e\n\u003ctd\u003eu-blox UBX-M10050\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration storage\u003c\/th\u003e\n\u003ctd\u003eOnboard flash memory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency\u003c\/th\u003e\n\u003ctd\u003eL1 1575.42MHz; L2 1561.10MHz; L3 1602.00MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBaud rate\u003c\/th\u003e\n\u003ctd\u003e4800bps–921600bps, default 115200bps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSensitivity\u003c\/th\u003e\n\u003ctd\u003etracking -166dBm; capture -160dBm; cold start -148dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCold start\u003c\/th\u003e\n\u003ctd\u003eaverage 26 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarm start\u003c\/th\u003e\n\u003ctd\u003eaverage 24 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHot start\u003c\/th\u003e\n\u003ctd\u003eaverage 1 second\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAccuracy\u003c\/th\u003e\n\u003ctd\u003ehorizontal position autonomous \u0026lt;2m average; SBAS \u0026lt;2.0m average; timepulse RMS 30ns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum height\u003c\/th\u003e\n\u003ctd\u003e50,000m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum speed\u003c\/th\u003e\n\u003ctd\u003e500 m\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum acceleration\u003c\/th\u003e\n\u003ctd\u003e≤4G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRefresh rate\u003c\/th\u003e\n\u003ctd\u003e0.25Hz–18Hz, default 1Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e18 x 18 x 8.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e8.5g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPS only - no compass.\u003c\/strong\u003e Fine for Betaflight GPS Rescue and OSD; for INAV \/ ArduPilot navigation modes that need heading, pick a module with a compass such as the \u003ca href=\"\/products\/tbs-m10q-gps-glonass-module\"\u003eTBS M10Q\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e TX\/RX to a free FC UART (crossed), 5V and GND.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e Betaflight 4.3 or newer, INAV, ArduPilot. Default refresh is 1Hz - the flight controller normally reconfigures it on boot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 18 x 18mm, 8.5g - fits 3.5-5\" builds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFC \/ stacks: \u003ca href=\"\/products\/speedybee-f405-v5-55a-stack-standard\"\u003eSpeedyBee F405 V5\u003c\/a\u003e, \u003ca href=\"\/products\/speedybee-f405-mini-bls-35a-20x20-stack\"\u003eSpeedyBee F405 Mini\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-f722-bt-32bit-50a-stack\"\u003eGEPRC TAKER F722 BT\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eReceiver: \u003ca href=\"\/products\/radiomaster-rp4td-m-expresslrs-mini-true-diversity-receiver\"\u003eRadioMaster RP4TD-M\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default Title","offer_id":46422525444130,"sku":"TBS-M10-GPS","price":1699.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302428.jpg?v=1786841166"},{"product_id":"tbs-m10q-gps-glonass-module","title":"TBS M10Q GPS Glonass Module","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe TBS M10Q GPS Glonass is Team BlackSheep's 25x25mm GPS module with an integrated \u003cstrong\u003eQMC5883P magnetometer\u003c\/strong\u003e, built on the u-blox UBX-M10050 chipset. The onboard compass provides drift-free heading data, essential for reliable Return-to-Home, GPS Rescue and accurate waypoint navigation in INAV and Betaflight.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302476.jpg\" alt=\"TBS M10Q GPS Glonass module view 2\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302477.jpg\" alt=\"TBS M10Q GPS Glonass module view 3\"\u003e\u003cp\u003eOnboard flash memory saves your configuration permanently, and high tracking sensitivity of -166dBm keeps the lock solid in challenging environments.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eChipset\u003c\/th\u003e\n\u003ctd\u003eu-blox UBX-M10050\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMagnetometer\u003c\/th\u003e\n\u003ctd\u003eQMC5883P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration storage\u003c\/th\u003e\n\u003ctd\u003eOnboard flash memory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency\u003c\/th\u003e\n\u003ctd\u003eL1 1575.42MHz; L2 1561.10MHz; L3 1602.00MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBaud rate\u003c\/th\u003e\n\u003ctd\u003e4800bps–921600bps, default 115200bps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSensitivity\u003c\/th\u003e\n\u003ctd\u003etracking -166dBm; capture -160dBm; cold start -148dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCold start\u003c\/th\u003e\n\u003ctd\u003eaverage 26 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarm start\u003c\/th\u003e\n\u003ctd\u003eaverage 24 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHot start\u003c\/th\u003e\n\u003ctd\u003eaverage 1 second\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAccuracy\u003c\/th\u003e\n\u003ctd\u003ehorizontal position autonomous \u0026lt;2m average; SBAS \u0026lt;2.0m average; timepulse RMS 30ns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum height\u003c\/th\u003e\n\u003ctd\u003e50,000m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum speed\u003c\/th\u003e\n\u003ctd\u003e500 m\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum acceleration\u003c\/th\u003e\n\u003ctd\u003e≤4G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRefresh rate\u003c\/th\u003e\n\u003ctd\u003e0.25Hz–18Hz, default 1Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e25 x 25 x 7.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e13.5g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompass is a QMC5883P\u003c\/strong\u003e (not the older QMC5883L). It needs flight-controller firmware recent enough to include the QMC5883P driver - on older firmware the compass won't be detected, though GPS still works. Check your firmware version before buying.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e TX\/RX to a free FC UART (crossed), 5V and GND; compass on the FC's I2C pads (SDA\/SCL).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 25 x 25mm, 13.5g - 5\"+, 7\" long-range and fixed-wing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFC \/ stacks with I2C: \u003ca href=\"\/products\/speedybee-f405-v5-55a-stack-standard\"\u003eSpeedyBee F405 V5\u003c\/a\u003e, \u003ca href=\"\/products\/matek-h743-slim-v4-flight-controller\"\u003eMatek H743-SLIM V4\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-h743-bt-8bit-80a-stack\"\u003eGEPRC TAKER H743\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFixed-wing FC: \u003ca href=\"\/products\/tbs-lucid-h7-wing-fc\"\u003eTBS Lucid H7 Wing\u003c\/a\u003e, \u003ca href=\"\/products\/speedybee-f405-wing-app-fixed-wing-flight-controller\"\u003eSpeedyBee F405 Wing\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default Title","offer_id":46423415226402,"sku":"TBS-M10Q-GPS","price":1999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302475.jpg?v=1786872830"},{"product_id":"tbs-m10n-nano-gps-glonass-module","title":"TBS M10N Nano GPS Glonass Module","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe TBS M10N GPS Glonass is Team BlackSheep's nano GPS module, engineered for micro and lightweight FPV builds. At just 3g and 16.5 x 12.3 x 6.0mm it delivers reliable positioning for Return-to-Home and OSD telemetry without the bulk of a full-size unit.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/TBS_20M10N_1.jpg\" alt=\"TBS M10N nano GPS Glonass module view 2\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/tbs-m10n-mini-gps-09d75f_l.jpg\" alt=\"TBS M10N GPS\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/tbs-m10n-mini-gps-7386dc_l.jpg\" alt=\"TBS M10N GPS module\"\u003e\u003cp\u003eBuilt on the u-blox M10050 chipset, it locks onto GPS, BDS, Galileo, QZSS and SBAS simultaneously with -166dBm tracking sensitivity and 2.0m CEP accuracy. Flash memory retains configuration after power loss.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eChip\u003c\/th\u003e\n\u003ctd\u003eu-blox M10050\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReceiver type\u003c\/th\u003e\n\u003ctd\u003eGPS L1 C\/A, QZSS L1 C\/A\/S, BDS B1I\/B1C, Galileo E1B\/C, SBAS L1 C\/A (WAAS, EGNOS, MSAS, GAGAN)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDefault position system\u003c\/th\u003e\n\u003ctd\u003eGPS, BDS, Galileo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAugmentation\u003c\/th\u003e\n\u003ctd\u003eSBAS, QZSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSensitivity\u003c\/th\u003e\n\u003ctd\u003etracking \u0026amp; navigation -166dBm; reacquisition -160dBm; cold start -148dBm; hot start -160dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAccuracy\u003c\/th\u003e\n\u003ctd\u003ehorizontal 2.0m CEP; velocity 0.05 m\/s; dynamic heading 0.3°; time pulse RMS 30ns, 99% within 60ns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcquisition\u003c\/th\u003e\n\u003ctd\u003ecold start 27s; hot start 1s; aided start 1s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eData output\u003c\/th\u003e\n\u003ctd\u003e4800–921600bps (default 115200bps), TTL; NMEA and UBX (PVT); NMEA RMC, VTG, GGA, GSA, GSV, GLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUpdate rate\u003c\/th\u003e\n\u003ctd\u003e0.25Hz–18Hz (default 10Hz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration storage\u003c\/th\u003e\n\u003ctd\u003eFlash memory retains configuration after power loss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperational limits\u003c\/th\u003e\n\u003ctd\u003ealtitude 80,000m; velocity 500 m\/s; dynamics \u0026lt;4g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e3.6V–5.5V (typical 5.0V), 15mA @ 5.0V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e16.5 x 12.3 x 6.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003e1.00mm 4-pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTemperature\u003c\/th\u003e\n\u003ctd\u003eoperating -40°C to +85°C; storage -40°C to +105°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePPS LED\u003c\/th\u003e\n\u003ctd\u003eoff with no fix, flashes blue after 3D positioning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPS only - no compass.\u003c\/strong\u003e Ideal for Betaflight GPS Rescue on micro builds; INAV navigation modes need a compass module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e 4 wires - TX\/RX to a free FC UART (crossed), 5V and GND. Needs 3.6V or more, so use a 5V pad, not 3.3V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3g, 16.5 x 12.3mm - fits 2.5-3.5\" cinewhoops and toothpicks with 25.5mm AIOs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAIOs: \u003ca href=\"\/products\/geprc-taker-f722-45a-32bit-aio\"\u003eGEPRC TAKER F722 45A AIO\u003c\/a\u003e, \u003ca href=\"\/products\/micoair743-v2-aio-45a-am32-h743-fc-esc-all-in-one\"\u003eMicoAir743 V2 AIO\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrames: \u003ca href=\"\/products\/geprc-gep-cl35-v3-frame\"\u003eGEPRC CL35 V3\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-gep-cl30-v3-frame\"\u003eGEPRC CL30 V3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default Title","offer_id":46423418077218,"sku":"TBS-M10N-GPS","price":1699.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/TBS_20M10N_0.jpg?v=1786872851"},{"product_id":"tbs-5g8-mmcx-linear-antenna","title":"TBS 5G8 MMCX Linear Antenna","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe TBS 5G8 MMCX linear antenna is a simple, ultralight 5.8GHz antenna for video transmitters with an MMCX connector, such as the TBS Unify Pro32 MMCX. Linear antennas are a good choice for racing and compact builds where weight and simplicity matter most.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/TBS-5G8-MMCX-Linear-Antenna-2.jpg\" alt=\"TBS 5G8 MMCX Linear Antenna detail\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/tbs-linear-antenna-58.jpg\" alt=\"TBS 5G8 MMCX linear antenna\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency\u003c\/th\u003e\n\u003ctd\u003e5.8GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePolarisation\u003c\/th\u003e\n\u003ctd\u003eLinear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eMMCX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003eapprox. 102mm including shrink tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.8g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector: MMCX\u003c\/strong\u003e - only for VTXs with an MMCX socket. It won't fit U.FL or SMA VTXs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear:\u003c\/strong\u003e works with any goggle antenna but with some signal loss versus matched circular antennas - best for racing and close-range flying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1x TBS 5G8 MMCX linear antenna\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default","offer_id":46429708025890,"sku":"AF-TBS-5G8-MMCX-LINEAR","price":849.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/TBS-5G8-MMCX-Linear-Antenna.jpg?v=1787654630"},{"product_id":"tbs-flux-soldering-paste","title":"TBS Flux","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eTBS Flux is a no-clean soldering flux paste (NC-559-ASM-UV type) in a 10cc syringe, for clean, reliable solder joints on FPV electronics. A small dab helps solder flow onto pads and wires, makes tinning XT60 leads and motor wires much easier, and leaves no residue that needs cleaning off the board.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7301370_700x700_f4f0d583-9bf7-41f6-bc09-1e3e7b3bffaa.jpg\" alt=\"TBS Flux detail\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eNo-clean formula — no extra PCB cleaning step\u003c\/li\u003e\n\u003cli\u003eHelps solder wet pads and wires quickly for stronger joints\u003c\/li\u003e\n\u003cli\u003e10cc syringe with plunger and needle for precise dispensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7301371.jpg\" alt=\"TBS Flux\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eNo-clean flux paste (NC-559-ASM-UV)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVolume\u003c\/th\u003e\n\u003ctd\u003e10cc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1x TBS flux syringe (10cc) with plunger and needle\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default Title","offer_id":46429713334306,"sku":"AF-TBS-FLUX","price":599.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/Flux_700x700_d375c174-1b3c-40ca-9a83-eb4e9a17edad.jpg?v=1787654825"},{"product_id":"tbs-solder-100g","title":"TBS Solder 100g","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eTBS solder wire on a 100g spool with a 0.8mm diameter — a general-purpose rosin-core solder for FPV builds and repairs. 0.8mm is a good all-round size: fine enough for flight controller and receiver pads, yet quick to feed onto larger power pads and connectors.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/TBS-Solder-100g-Dia-0.8mm-TBS-52476931_1000x_bea262e0-4c29-41d0-b77b-871eedfe6884.jpg\" alt=\"TBS Solder 100g 0.8mm\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eRosin flux core for clean, easy-flowing joints\u003c\/li\u003e\n\u003cli\u003e0.8mm diameter suits both small pads and power leads\u003c\/li\u003e\n\u003cli\u003e100g spool lasts for many builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7301155.jpg\" alt=\"TBS Solder 100g\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7301154.jpg\" alt=\"TBS Solder 100g\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e100g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e0.8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCore\u003c\/th\u003e\n\u003ctd\u003eRosin flux\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1x TBS solder spool (100g)\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"0.8mm","offer_id":46429713858594,"sku":"AF-TBS-SOLDER-100G-0.8MM","price":999.0,"currency_code":"INR","in_stock":true},{"title":"0.5mm","offer_id":47153444880418,"sku":"AF-TBS-SOLDER-100G-0.5MM","price":999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/TBS-Solder-100g-Dia-0.8mm-TBS-52476931_1000x_2cadb691-d338-4a53-98fc-76e2de699e0b.jpg?v=1787654841"},{"product_id":"tbs-sexy-driver-kit","title":"TBS Sexy Driver Kit","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eTBS Sexy Driver Kit — heat-treated, anodized black hand tool set curated by Team BlackSheep for FPV drone assembly and repair.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/DSC09618ga.jpg\" alt=\"TBS Sexy Driver Kit\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/DSC09614ga.jpg\" alt=\"TBS Sexy Driver Kit\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/DSC09622ga.jpg\" alt=\"TBS Sexy Driver Kit\"\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003e1x M2.0 Philips head screwdriver\u003c\/li\u003e\n\u003cli\u003e1x M2.0 hex driver\u003c\/li\u003e\n\u003cli\u003e1x M5 TBS PowerCube tool\u003c\/li\u003e\n\u003cli\u003e1x M8 prop tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default","offer_id":46429717168162,"sku":"AF-TBS-SEXY-DRIVER","price":1699.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/DSC09620ga.jpg?v=1787670074"},{"product_id":"ummagrip-battery-pad-tbs-edition","title":"Ummagrip Battery Pad - TBS Edition","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eUmmagrip Battery Pad, TBS Edition — cut-to-size universal battery pad that keeps LiPo batteries locked in place, developed originally for the Remix FPV freestyle frame.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7300927.jpg\" alt=\"Ummagrip Battery Pad - TBS Edition\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7300928.jpg\" alt=\"Ummagrip Battery Pad - TBS Edition\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7300925.jpg\" alt=\"Ummagrip Battery Pad - TBS Edition\"\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eDimensions: 100mm x 50mm x 3mm — cut to fit any frame\u003c\/li\u003e\n\u003cli\u003e3M permanent adhesive on the frame side; debossed TBS logo texture on the battery side for grip without sticking\u003c\/li\u003e\n\u003cli\u003eCleans easily with a damp sponge — regains stickiness once dry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default","offer_id":46429719298082,"sku":"AF-TBS-UMMAGRIP-PAD","price":649.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/TBS-Battery-Pad.jpg?v=1787670150"},{"product_id":"tbs-battery-anti-slip-pad","title":"TBS Battery Anti-Slip Pad","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eSuper grippy, sticky battery pads from Team BlackSheep (TBS). Stick one to the battery-mount plate of your frame and it gives the LiPo a tacky, rubbery surface to sit on, so the pack stops sliding forward in hard punch-outs or ejecting in a crash, and your strap can hold it firmly with less tension. Each pad is 100 x 50mm, so you can cut it to suit any size of quad.\u003c\/p\u003e\n\u003ch3\u003eWhy use a battery pad?\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eKeeps the LiPo from shifting during flips, punch-outs and crashes\u003c\/li\u003e\n\u003cli\u003eProtects the battery wrap and the carbon plate from rubbing\u003c\/li\u003e\n\u003cli\u003eLets the strap hold the pack securely without over-tightening\u003c\/li\u003e\n\u003cli\u003eCut to your own size for anything from whoops to 7\" long-range quads\u003c\/li\u003e\n\u003cli\u003ePack of 3 identical pads, with double-sided sticky tape backing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to fit\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eClean the battery-mount area of the frame with isopropyl alcohol.\u003c\/li\u003e\n\u003cli\u003eTrim the pad to the plate shape if needed.\u003c\/li\u003e\n\u003cli\u003ePeel the backing and press firmly for 30 seconds; let it settle before flying.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e100 x 50 x 2.5 mm per pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrip\u003c\/th\u003e\n\u003ctd\u003eSuper grippy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eDouble-sided sticky tape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e3 identical pads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e3 x TBS anti-slip battery pad (100 x 50 x 2.5mm) with double-sided sticky tape backing\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"3 pcs","offer_id":46429721100322,"sku":"AF-GEN-ANTISLIP-PAD","price":699.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/DSC01296-ga.jpg?v=1793142067"},{"product_id":"tbs-chupito-fpv-flying-wing","title":"TBS Chupito FPV Flying Wing","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe TBS Chupito is a compact, 800mm forward-swept FPV flying wing that takes its design cues from the bigger TBS Mojito, but trades some outright efficiency for easier handling and a simpler build. It still cruises at around 70 km\/h and reaches about 160 km\/h on the stock electronics, while giving roughly 20 minutes and 15 km of relaxed flying on a 6S 1300mAh pack — quietly enough not to annoy the neighbours. Small enough to strap to a backpack or put on a car seat, it's an ideal bring-along wing.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003ePNP Crash-A-Lot\u003c\/strong\u003e version comes with \u003cstrong\u003etwo complete Chupito airframes\u003c\/strong\u003e, one set of hardware and \u003cstrong\u003eone full TBS Chupito electronics package\u003c\/strong\u003e — servos, motor, propeller, flight controller\/ESC and GPS. Fly it hard, and when an airframe is finished, move the electronics into the spare and keep flying instead of waiting for parts. Add your own receiver, video system and battery to get in the air.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302784.jpg\" alt=\"TBS Chupito FPV flying wing\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302808.jpg\" alt=\"TBS Chupito FPV flying wing top view\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302796.jpg\" alt=\"TBS Chupito FPV flying wing detail\"\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpare airframe included\u003c\/strong\u003e — two full sets of foam parts for near-zero downtime after a crash\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatched TBS electronics\u003c\/strong\u003e — Chupito 2207 2000KV motor, Lucid Wing AIO 2–6S and M10 GPS, chosen by TBS for this airframe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy-flying forward-swept design\u003c\/strong\u003e with a wide performance envelope — relaxed cruising through to fast passes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable EPP foam\u003c\/strong\u003e with oversized pushrods and wing spars that shrug off rough landings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-cut slots\u003c\/strong\u003e for camera, servos, battery, receiver and receiver antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush-to-open equipment bay\u003c\/strong\u003e for R\/C and FPV electronics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog or digital FPV\u003c\/strong\u003e — suits DJI O3\/O4, Walksnail or analog, with TBS 3D-printable customisations available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravel or bash\u003c\/strong\u003e — keep it in a 4-piece travel configuration, or glue it all down for a tough basher\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick build\u003c\/strong\u003e — under an hour from box to finished wing with the included TBS electronics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWingspan\u003c\/td\u003e\n\u003ctd\u003e800mm (31.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll-up weight\u003c\/td\u003e\n\u003ctd\u003eapprox. 650g and up, depending on setup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEPP foam with carbon spars\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCruise speed\u003c\/td\u003e\n\u003ctd\u003eApprox. 70 km\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTop speed\u003c\/td\u003e\n\u003ctd\u003eApprox. 160 km\/h (stock electronics)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlight time\u003c\/td\u003e\n\u003ctd\u003eApprox. 20 min casual flying (6S 1300mAh)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRange\u003c\/td\u003e\n\u003ctd\u003eApprox. 15 km per pack, casual flying\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery\u003c\/td\u003e\n\u003ctd\u003e4S–6S, 800–1800mAh; max 50 x 50 x 150mm and 270g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003eTBS Chupito 2207 2000KV (12N14P, 4mm hollow shaft, MT30 connector, 29.9g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePropeller\u003c\/td\u003e\n\u003ctd\u003eHQ R37 gray (direction set via AM32)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlight controller \/ ESC\u003c\/td\u003e\n\u003ctd\u003eTBS Lucid Wing AIO 2–6S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGPS\u003c\/td\u003e\n\u003ctd\u003eTBS M10 GPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl surfaces\u003c\/td\u003e\n\u003ctd\u003eElevons, 2x TBS Chupito servos (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended FPV\u003c\/td\u003e\n\u003ctd\u003eDJI O3\/O4, Walksnail or any analog system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended receiver\u003c\/td\u003e\n\u003ctd\u003eTBS Crossfire Nano RX or Nano RX Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceiver:\u003c\/strong\u003e any CRSF receiver works with the Lucid Wing AIO — TBS Crossfire Nano RX \/ Nano RX Pro, or an ExpressLRS receiver with proper antennas for range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 4S–6S only; check the pack fits 50 x 50 x 150mm and weighs under 270g.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e in iNav, servos use Timer 3 (S1\/S2) and the motor Timer 4 (S7); TBS's Chupito CLI is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadios: \u003ca href=\"\/products\/radiomaster-pocket-radio-controller\"\u003eRadioMaster Pocket\u003c\/a\u003e, \u003ca href=\"\/products\/radiomaster-tx16s-mk3-radio-controller\"\u003eRadioMaster TX16S MK3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eReceivers: \u003ca href=\"\/products\/radiomaster-rp3-v2-expresslrs-2-4ghz-nano-receiver\"\u003eRadioMaster RP3 V2 (ELRS)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eDigital video: \u003ca href=\"\/products\/walksnail-avatar-hd-pro-kit\"\u003eWalksnail Avatar HD Pro Kit\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalog video: \u003ca href=\"\/products\/tbs-unify-pro-5g8-hv-sma\"\u003eTBS Unify Pro 5G8 HV\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGoggles: \u003ca href=\"\/products\/dji-goggles-n3\"\u003eDJI Goggles N3\u003c\/a\u003e, \u003ca href=\"\/products\/skyzone-cobra-x-v4-5-8ghz-fpv-goggles\"\u003eSkyzone Cobra X V4\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eChargers: \u003ca href=\"\/products\/hota-d6-pro-smart-charger\"\u003eHOTA D6 Pro\u003c\/a\u003e, \u003ca href=\"\/products\/hota-d6-ultra-325w-15a-1-6s\"\u003eHOTA D6 Ultra\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpare GPS: \u003ca href=\"\/products\/tbs-m10-gps-glonass-module\"\u003eTBS M10 GPS\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eWant more speed and range? \u003ca href=\"\/products\/tbs-mojito-fpv-flying-wing\"\u003eTBS Mojito FPV Flying Wing\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the box (PNP Crash-A-Lot)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x complete TBS Chupito foam airframes\u003c\/li\u003e\n\u003cli\u003e1x set of hardware\u003c\/li\u003e\n\u003cli\u003e1x TBS Chupito sticker sheet\u003c\/li\u003e\n\u003cli\u003e1x TBS Chupito Electronics Package:\n\u003cul\u003e\n\u003cli\u003e2x TBS Chupito servos\u003c\/li\u003e\n\u003cli\u003e1x TBS Chupito 2207 2000KV motor\u003c\/li\u003e\n\u003cli\u003e1x HQ R37 gray propeller\u003c\/li\u003e\n\u003cli\u003e1x TBS Lucid Wing AIO 2–6S\u003c\/li\u003e\n\u003cli\u003e1x TBS M10 GPS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRequired to complete (not included)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadio transmitter and receiver (TBS Crossfire Nano RX \/ Nano RX Pro recommended)\u003c\/li\u003e\n\u003cli\u003eFPV camera and video transmitter, or a digital air unit (DJI O3\/O4, Walksnail)\u003c\/li\u003e\n\u003cli\u003e4S–6S flight battery and a suitable charger\u003c\/li\u003e\n\u003cli\u003eGlue for assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"afn\"\u003e\n\u003cstrong\u003eGood to know\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eOne electronics set is included — the second airframe is a spare to move it into, not a second complete plane.\u003c\/li\u003e\n\u003cli\u003eAssembly is required; plan on about an hour.\u003c\/li\u003e\n\u003cli\u003eA friendly wing for pilots moving into fixed-wing FPV, while still quick enough to keep experienced pilots entertained.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"PNP Crash-A-Lot","offer_id":46429735813154,"sku":"AF-TBS-CHUPITO-800MM-FLYING","price":29499.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2chu1ele.jpg?v=1788093870"},{"product_id":"tbs-mojito-fpv-flying-wing","title":"TBS Mojito FPV Flying Wing","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe TBS Mojito is Team BlackSheep's forward-swept FPV flying wing, designed from the ground up to cut drag. The result is a 1270mm wing that tops 200 km\/h (125 mph) yet cruises at 90–120 km\/h on very little power — giving up to 60 minutes in the air and around 100 km of range per pack. It breaks down into three pieces with push-to-release buttons, so it travels easily between sessions.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003ePNP version\u003c\/strong\u003e arrives with the airframe pre-assembled, elevon servos installed and TBS's matched electronics package (motor, ESC, flight controller, PDB and GPS). Add your own receiver, video system and battery and you're ready to set up and fly.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/Mojito_20-_200.jpg\" alt=\"TBS Mojito FPV flying wing in flight\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/Mojito_20-_201.jpg\" alt=\"TBS Mojito FPV flying wing top view\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/Mojito_20-_202.jpg\" alt=\"TBS Mojito FPV flying wing detail\"\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-drag airfoil\u003c\/strong\u003e derived from dynamic-soaring gliders, with a thin profile made possible by high-density EPP foam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInjection-moulded leading and trailing edges\u003c\/strong\u003e for precise airflow, plus carbon fibre reinforcement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully internal linkages\u003c\/strong\u003e and internally mounted control surfaces — nothing hanging in the airstream\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-free breakdown\u003c\/strong\u003e into 3 pieces; both wings detach with push-to-open buttons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo push-to-open equipment bays\u003c\/strong\u003e for R\/C and FPV electronics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-cut slots\u003c\/strong\u003e for camera, servos, battery, receiver and receiver antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog or digital FPV\u003c\/strong\u003e — suits DJI O3\/O4, Walksnail or analog; TBS publishes 3D-print files for noses and camera mounts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED-ready\u003c\/strong\u003e — leading-edge covers on the wings and fin are left unglued so you can fit LED strips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional airbrake servos\u003c\/strong\u003e can be added for slower, more precise landings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWingspan\u003c\/td\u003e\n\u003ctd\u003e1270mm (50\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll-up weight\u003c\/td\u003e\n\u003ctd\u003eapprox. 1800g and up, depending on setup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHigh-density EPP foam, carbon fibre and injection-moulded plastic reinforcements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTop speed\u003c\/td\u003e\n\u003ctd\u003e200+ km\/h (125 mph)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCruise speed\u003c\/td\u003e\n\u003ctd\u003e90–120 km\/h (60–75 mph)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlight time\u003c\/td\u003e\n\u003ctd\u003eUp to 60 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEndurance\u003c\/td\u003e\n\u003ctd\u003eApprox. 100 km (60 mi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery\u003c\/td\u003e\n\u003ctd\u003e6S–8S LiPo\/Li-ion, max 70 x 50 x 230mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003eAOS Supernova 3220 1000KV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePropeller\u003c\/td\u003e\n\u003ctd\u003eHQProp 8x4.5 glass-fibre nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eESC\u003c\/td\u003e\n\u003ctd\u003eTBS Lucid 12S ESC with heat sink (AM32 firmware)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlight controller\u003c\/td\u003e\n\u003ctd\u003eTBS Lucid Freestyle FC (AT32F435, ICM42688P gyro, iNav)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGPS\u003c\/td\u003e\n\u003ctd\u003eTBS M10 GPS (no compass)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl surfaces\u003c\/td\u003e\n\u003ctd\u003e2 elevon servos, pre-installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended receiver\u003c\/td\u003e\n\u003ctd\u003eTBS Crossfire Nano RX or Nano RX Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceiver:\u003c\/strong\u003e any CRSF receiver works with the Lucid FC — TBS Crossfire Nano RX \/ Nano RX Pro, or an ExpressLRS receiver with proper antennas for long range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 6S–8S; check the pack fits 70 x 50 x 230mm. An 8S pack needs a charger rated for 8S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog video:\u003c\/strong\u003e most analog VTXs top out at 6S input, so on 7S–8S power them from a regulated BEC rather than battery voltage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadios: \u003ca href=\"\/products\/radiomaster-pocket-radio-controller\"\u003eRadioMaster Pocket\u003c\/a\u003e, \u003ca href=\"\/products\/radiomaster-tx16s-mk3-radio-controller\"\u003eRadioMaster TX16S MK3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eReceivers: \u003ca href=\"\/products\/radiomaster-rp3-v2-expresslrs-2-4ghz-nano-receiver\"\u003eRadioMaster RP3 V2 (ELRS)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eDigital video: \u003ca href=\"\/products\/walksnail-avatar-hd-pro-kit\"\u003eWalksnail Avatar HD Pro Kit\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGoggles: \u003ca href=\"\/products\/dji-goggles-n3\"\u003eDJI Goggles N3\u003c\/a\u003e, \u003ca href=\"\/products\/skyzone-cobra-x-v4-5-8ghz-fpv-goggles\"\u003eSkyzone Cobra X V4\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eChargers: \u003ca href=\"\/products\/hota-t8-ultra-650w-1-8s-ac-dc-gan-smart-charger\"\u003eHOTA T8 Ultra (1–8S)\u003c\/a\u003e, \u003ca href=\"\/products\/hota-d6-pro-smart-charger\"\u003eHOTA D6 Pro (up to 6S)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpare GPS: \u003ca href=\"\/products\/tbs-m10-gps-glonass-module\"\u003eTBS M10 GPS\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eWant something smaller? \u003ca href=\"\/products\/tbs-chupito-fpv-flying-wing\"\u003eTBS Chupito FPV Flying Wing\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the box (PNP)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x TBS Mojito airframe (pre-assembled, 2 elevon servos installed)\u003c\/li\u003e\n\u003cli\u003eCarbon fibre reinforcement strips\u003c\/li\u003e\n\u003cli\u003e1x TBS Mojito sticker sheet\u003c\/li\u003e\n\u003cli\u003e1x AOS Supernova 3220 1000KV motor\u003c\/li\u003e\n\u003cli\u003e1x HQProp 8x4.5 propeller\u003c\/li\u003e\n\u003cli\u003e1x TBS Lucid 12S ESC with heat sink\u003c\/li\u003e\n\u003cli\u003e1x TBS Lucid Freestyle flight controller\u003c\/li\u003e\n\u003cli\u003e1x TBS Lucid Wing PDB\u003c\/li\u003e\n\u003cli\u003e1x TBS M10 GPS module\u003c\/li\u003e\n\u003cli\u003e2x 330µF 12S capacitors\u003c\/li\u003e\n\u003cli\u003e1x XT60 connector with 12AWG power lead\u003c\/li\u003e\n\u003cli\u003e1x DJI O3\/O4 extension cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRequired to complete (not included)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadio transmitter and receiver (TBS Crossfire Nano RX \/ Nano RX Pro recommended)\u003c\/li\u003e\n\u003cli\u003eFPV camera and video transmitter, or a digital air unit (DJI O3\/O4, Walksnail)\u003c\/li\u003e\n\u003cli\u003e6S–8S flight battery and a suitable charger\u003c\/li\u003e\n\u003cli\u003eGlue for final assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"afn\"\u003e\n\u003cstrong\u003eGood to know\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eElectronics installation typically takes an afternoon; the flight controller runs iNav, and TBS publishes suggested iNav CLI settings.\u003c\/li\u003e\n\u003cli\u003eThis is a fast wing aimed at pilots with fixed-wing experience — it is not a beginner trainer.\u003c\/li\u003e\n\u003cli\u003eManual and 3D-print files: \u003ca href=\"https:\/\/www.team-blacksheep.com\/media\/files\/tbs-mojito-manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTBS Mojito manual (PDF)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"PNP","offer_id":46429736370210,"sku":"AF-TBS-MOJITO-FLYING-WING","price":44999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/Mojito_20-_203.jpg?v=1788093882"},{"product_id":"tbs-lucid-freestyle-stack-6s-60a","title":"TBS Lucid Freestyle Stack 6S 60A","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe TBS Lucid Freestyle Stack pairs a full-featured Betaflight and INAV flight controller with TBS's 6S 60A AM32 4-in-1 ESC. The FC runs the latest-generation AT32 MCU with an ICM-42688P gyro and six UARTs, and the ESC uses TBS's Gorilla bracket mounting, which keeps bolts out of the hot centre of the board. TBS designed it for 3 to 8 inch quads on 3S to 6S with any analog or digital video system.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/TBS-Lucid-Stack-3.jpg\" alt=\"TBS Lucid Freestyle Stack 6S 60A\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eAT32F435 flight controller with ICM-42688P gyro, 8MB blackbox and 6 UARTs\u003c\/li\u003e\n\u003cli\u003e4-in-1 AM32 ESC: 60A continuous, 70A burst per motor\u003c\/li\u003e\n\u003cli\u003eGorilla mounting (39.5 x 16mm) with brackets for 20x20mm and 30.5x30.5mm frames\u003c\/li\u003e\n\u003cli\u003eBi-directional DShot and ESC telemetry with current sensing\u003c\/li\u003e\n\u003cli\u003eRuns Betaflight and INAV; ESC configurable with the AM32 online configurator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/TBS-Lucid-FC-0.jpg\" alt=\"TBS Lucid FC Freestyle\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/TBS-LUCID-ESC-0.jpg\" alt=\"TBS Lucid 6S 4in1 ESC\"\u003e\u003ch3\u003eFlight controller\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMCU\u003c\/th\u003e\n\u003ctd\u003eAT32F435RMT7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGyro\u003c\/th\u003e\n\u003ctd\u003eICM-42688P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOSD\u003c\/th\u003e\n\u003ctd\u003eAT7456E\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlackbox\u003c\/th\u003e\n\u003ctd\u003e8MB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUARTs\u003c\/th\u003e\n\u003ctd\u003e6 (1, 3, 4, 5, 7, 8)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBEC\u003c\/th\u003e\n\u003ctd\u003e9V 2.5A and 5V 2A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003e3-6S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e31 x 29mm; mounting 20 x 20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e4.51g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eESC\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFirmware\u003c\/th\u003e\n\u003ctd\u003eAM32 (target tbslu6s4in1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated current\u003c\/th\u003e\n\u003ctd\u003e60A x4 (300 s)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePeak current\u003c\/th\u003e\n\u003ctd\u003e70A x4 (60 s)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003e3-6S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtocol\u003c\/th\u003e\n\u003ctd\u003ebi-directional DShot300\/600, KISS ESC telemetry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent sensor\u003c\/th\u003e\n\u003ctd\u003eyes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBEC\u003c\/th\u003e\n\u003ctd\u003eno\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProps\u003c\/th\u003e\n\u003ctd\u003eup to 9 inch (over 7 inch needs good airflow)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e34 x 44mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e13.81g (19g with brackets)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e the 20x20 FC sits on the ESC's Gorilla brackets, which bolt to 20x20 or 30.5x30.5mm frames - so it fits most 3-8\" frames.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 3-6S. No ESC BEC - the FC's 9V \/ 5V BECs power the video and accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo:\u003c\/strong\u003e analog OSD or any digital system; DJI air units connect by cable to the 9V BEC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e Betaflight or INAV (not ArduPilot - for that choose the \u003ca href=\"\/products\/tbs-lucid-h7-fc\"\u003eLucid H7 FC\u003c\/a\u003e).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrames: \u003ca href=\"\/products\/tbs-source-one-frame\"\u003eTBS Source One\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-gep-mk5-o4-pro-dc-frame\"\u003eGEPRC MK5 O4 Pro DC\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors: \u003ca href=\"\/products\/t-motor-velox-v3-2207-motor\"\u003eT-Motor Velox V3 2207\u003c\/a\u003e, \u003ca href=\"\/products\/iflight-xing2-2207-motor\"\u003eiFlight XING2 2207\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGPS: \u003ca href=\"\/products\/tbs-m10-gps-glonass-module\"\u003eTBS M10 GPS\u003c\/a\u003e; VTX: \u003ca href=\"\/products\/tbs-unify-pro32-hv-mmcx\"\u003eTBS Unify Pro32 HV\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSeparate parts: \u003ca href=\"\/products\/tbs-lucid-6s-4in1-esc-60a-3-6s-am32\"\u003eTBS Lucid 6S 4in1 ESC\u003c\/a\u003e, \u003ca href=\"\/products\/tbs-lucid-h7-fc\"\u003eTBS Lucid H7 FC\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eEarly sample boards had the UART3 RX\/TX silkscreen swapped; TBS states production units are correctly marked.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default Title","offer_id":46435885645858,"sku":"30668","price":8999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/TBS-Lucid-Stack-0.jpg?v=1787068219"},{"product_id":"tbs-lucid-6s-4in1-esc-60a-3-6s-am32","title":"TBS Lucid 6S 4in1 ESC - 60A 3-6S AM32","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe TBS Lucid 6S 4in1 ESC is a 60A continuous, 70A burst AM32 4-in-1 built for racing and freestyle. It uses an 8-layer high-current-density board with roughly twice the on-board capacitance TBS sees as typical, and its thermal design avoids heavy heatsinks. TBS's Gorilla bracket mounting keeps bolts out of the centre of the ESC, with adapters for standard 20x20mm and 30.5x30.5mm stacks.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302512.jpg\" alt=\"TBS Lucid 6S 4in1 ESC - 60A 3-6S AM32\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003e60A x4 continuous, 70A x4 burst on 3-6S\u003c\/li\u003e\n\u003cli\u003eAM32 firmware with bi-directional DShot and KISS telemetry\u003c\/li\u003e\n\u003cli\u003e8-layer board, high on-board capacitance, no heavy heatsinks\u003c\/li\u003e\n\u003cli\u003eGorilla mount plus 20x20 \/ 30.5x30.5mm compatibility\u003c\/li\u003e\n\u003cli\u003eCurrent sensor output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/TBS-LUCID-ESC-0_170c22bc-7bbc-48d8-88e0-7b8cda0355f2.jpg\" alt=\"TBS Lucid 6S 4in1 ESC\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/TBS-LUCID-ESC-1.jpg\" alt=\"TBS Lucid 6S 4in1 ESC\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFirmware\u003c\/th\u003e\n\u003ctd\u003eAlkaMotors32 (AM32), target AM32_TBS_6S_4IN1_F421\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated current\u003c\/th\u003e\n\u003ctd\u003e60A x4 (300 s)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePeak current\u003c\/th\u003e\n\u003ctd\u003e70A x4 (60 s)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003e3-6S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtocol\u003c\/th\u003e\n\u003ctd\u003ebi-directional DShot300\/600, KISS ESC telemetry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent port\u003c\/th\u003e\n\u003ctd\u003eyes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBEC\u003c\/th\u003e\n\u003ctd\u003eno\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProps\u003c\/th\u003e\n\u003ctd\u003eup to 9 inch (over 7 inch needs good airflow)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e34 x 44mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eGorilla 39.5 x 16mm, 30.5 x 30.5mm, or 20 x 20mm via bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e13.81g (19g with brackets)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eESC only - no BEC.\u003c\/strong\u003e Your flight controller must have its own BEC for 5V\/9V devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlight controller:\u003c\/strong\u003e any FC with an 8-pin 4-in-1 ESC plug or solder pads; the included bracket takes 20x20 FCs, and 30.5x30.5 FCs bolt on directly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 3-6S. Motors from 3\" to 9\" props (good airflow above 7\").\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x TBS Lucid 4in1 ESC\u003c\/li\u003e\n\u003cli\u003e4x 2.2 x 4mm standoffs\u003c\/li\u003e\n\u003cli\u003e1x aluminium top bracket for 20x20 FCs\u003c\/li\u003e\n\u003cli\u003e1x XT60 power connector\u003c\/li\u003e\n\u003cli\u003e1x 470uF 6S capacitor\u003c\/li\u003e\n\u003cli\u003e4x M2x12 and 4x M2x14 screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlight controllers: \u003ca href=\"\/products\/tbs-lucid-h7-fc\"\u003eTBS Lucid H7 FC\u003c\/a\u003e, \u003ca href=\"\/products\/micoair743-v2-flight-controller-fc-only\"\u003eMicoAir743 V2\u003c\/a\u003e, \u003ca href=\"\/products\/foxeer-f722-v4-fc-icm42688-dps310\"\u003eFoxeer F722 V4\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eOr buy it pre-matched: \u003ca href=\"\/products\/tbs-lucid-freestyle-stack-6s-60a\"\u003eTBS Lucid Freestyle Stack 6S 60A\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors: \u003ca href=\"\/products\/t-motor-velox-v3-2207-motor\"\u003eT-Motor Velox V3 2207\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default Title","offer_id":46435885678626,"sku":"AF-TBS-LUCID-6S-4IN1-60A-36S-AM32","price":5549.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302510.jpg?v=1787068231"},{"product_id":"tbs-lucid-12s-90a-esc","title":"TBS Lucid 12S 90A ESC","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe TBS Lucid 12S 90A is a single AM32 ESC built for high-voltage, high-power builds such as cinelifters, X-class quads and fixed-wing aircraft. An 8-layer high-current-density board, built-in TVS surge protection and a thermal design without heavy heatsinks give it a strong power-to-weight ratio, and it runs props up to 15 inches on 3-12S.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302547.jpg\" alt=\"TBS Lucid 12S 90A ESC\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003e3-12S input, 70A for 60 s \/ 90A for 40 s, 120A peak\u003c\/li\u003e\n\u003cli\u003eBuilt-in TVS voltage-spike protection\u003c\/li\u003e\n\u003cli\u003e8-layer board designed for heat dissipation\u003c\/li\u003e\n\u003cli\u003eAM32 firmware with bi-directional DShot and KISS telemetry\u003c\/li\u003e\n\u003cli\u003ePWM or serial (DShot, CRSF) signal lead included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302548.jpg\" alt=\"TBS Lucid 12S 90A ESC\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302546.jpg\" alt=\"TBS Lucid 12S 90A ESC\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFirmware\u003c\/th\u003e\n\u003ctd\u003eAlkaMotors32 (AM32), target AM32_TBS_12S_F421\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated current\u003c\/th\u003e\n\u003ctd\u003e70A (60 s), 90A (40 s)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePeak current\u003c\/th\u003e\n\u003ctd\u003e120A (30 s)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003e3-12S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtocol\u003c\/th\u003e\n\u003ctd\u003ebi-directional DShot300\/600, KISS ESC telemetry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent port\u003c\/th\u003e\n\u003ctd\u003eyes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBEC\u003c\/th\u003e\n\u003ctd\u003eno\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProps\u003c\/th\u003e\n\u003ctd\u003eup to 15 inch (over 7 inch needs good airflow)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e57.75 x 29mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e19g (without cable and capacitors)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle ESC\u003c\/strong\u003e - one per motor (four for a quad, plus a PDB). Not a 4-in-1 stack board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo BEC\u003c\/strong\u003e - servos and receivers on planes need a separate BEC or a PDB with servo rail (e.g. TBS Lucid Wing PDB).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal:\u003c\/strong\u003e PWM from a plane receiver, or DShot \/ CRSF from a flight controller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWing builds: \u003ca href=\"\/products\/tbs-lucid-h7-wing-fc\"\u003eTBS Lucid H7 Wing FC\u003c\/a\u003e, \u003ca href=\"\/products\/tbs-lucid-wing-pdb\"\u003eTBS Lucid Wing PDB\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMultirotor PDB: \u003ca href=\"\/products\/tbs-lucid-pdb-500a\"\u003eTBS Lucid PDB 500A\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eLarge motors: \u003ca href=\"\/products\/iflight-xing-e-5215-motor-300kv\"\u003eiFlight XING-E 5215\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-em4214-motor-660kv\"\u003eGEPRC EM4214\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eUsed in the \u003ca href=\"\/products\/tbs-mojito-fpv-flying-wing-pnp\"\u003eTBS Mojito PNP\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x TBS Lucid 12S ESC\u003c\/li\u003e\n\u003cli\u003e1x XT60 12AWG lead\u003c\/li\u003e\n\u003cli\u003e1x 3-colour signal lead for PWM or serial (DShot, CRSF)\u003c\/li\u003e\n\u003cli\u003e1x transparent heat-shrink\u003c\/li\u003e\n\u003cli\u003e2x 330uF 12S low-ESR capacitors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default Title","offer_id":46435885875234,"sku":"31234","price":5449.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302545.jpg?v=1787068245"},{"product_id":"tbs-lucid-h7-fc","title":"TBS Lucid H7 FC","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe TBS Lucid H7 FC is a 480MHz STM32H743 flight controller for pilots who want the latest hardware and the most peripherals. It runs Betaflight, INAV and ArduPilot, has dual ICM42688 gyros, a DPS310 barometer, microSD blackbox, seven UARTs and a CAN bus, and supports DJI FPV OSD plus two switchable analog cameras – with plug-and-play cables for the ESC and DJI O3 included.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302728.jpg\" alt=\"TBS Lucid H7 FC\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eSTM32H743 at 480MHz – Betaflight, INAV and ArduPilot targets\u003c\/li\u003e\n\u003cli\u003eDual ICM42688 gyros and DPS310 barometer\u003c\/li\u003e\n\u003cli\u003e7 UARTs (signal-inversion ready), 2x I2C, 1x CAN\u003c\/li\u003e\n\u003cli\u003e13 PWM outputs including a dedicated LED pad\u003c\/li\u003e\n\u003cli\u003eDual switchable camera inputs; DJI FPV OSD over any spare UART\u003c\/li\u003e\n\u003cli\u003eSwitch for filtered 5V or Vbat output power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/image_2024_09_23T07_25_31_843Z.jpg\" alt=\"TBS Lucid H7 FC\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMCU\u003c\/th\u003e\n\u003ctd\u003eSTM32H743\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGyro\u003c\/th\u003e\n\u003ctd\u003e2x ICM42688\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOSD\u003c\/th\u003e\n\u003ctd\u003eAT7456E\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBarometer\u003c\/th\u003e\n\u003ctd\u003eDPS310\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlackbox\u003c\/th\u003e\n\u003ctd\u003emicroSD card slot (SDIO)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAnalog inputs\u003c\/th\u003e\n\u003ctd\u003e6 ADC (Vbat, current, RSSI, analog airspeed, Vbat2, current 2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUSB\u003c\/th\u003e\n\u003ctd\u003eType-C (USB 2.0)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnectors\u003c\/th\u003e\n\u003ctd\u003eJST-SH1.0 8-pin ESC plug, JST-GH1.25 4-pin CAN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e9–36V (3–8S LiPo)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBEC\u003c\/th\u003e\n\u003ctd\u003e5V 2A continuous (3A max) and 9V 2A continuous (3A max)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3.3V LDO\u003c\/th\u003e\n\u003ctd\u003eup to 200mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFirmware targets\u003c\/th\u003e\n\u003ctd\u003eTBS_LUCID_H7 (Betaflight, INAV, ArduPilot)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFC only - no ESC.\u003c\/strong\u003e Plugs straight into the TBS Lucid 6S 4in1 ESC (cable included); other 4-in-1 ESCs with an 8-pin plug or solder pads also work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 3-8S (not 2S).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo:\u003c\/strong\u003e analog (two switchable cameras) or DJI O3 \/ O4 via the included cable and 9V BEC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultirotor board\u003c\/strong\u003e - for planes use the \u003ca href=\"\/products\/tbs-lucid-h7-wing-fc\"\u003eLucid H7 Wing FC\u003c\/a\u003e, which has servo BECs and a high-current sensor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eESC: \u003ca href=\"\/products\/tbs-lucid-6s-4in1-esc-60a-3-6s-am32\"\u003eTBS Lucid 6S 4in1 ESC\u003c\/a\u003e; octocopter PDB \u003ca href=\"\/products\/tbs-lucid-pdb-500a\"\u003eTBS Lucid PDB 500A\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGPS: \u003ca href=\"\/products\/tbs-m10-gps-glonass-module\"\u003eTBS M10 GPS\u003c\/a\u003e, \u003ca href=\"\/products\/tbs-m10q-gps-glonass-module\"\u003eTBS M10Q\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFixed wing: \u003ca href=\"\/products\/tbs-lucid-wing-pdb\"\u003eTBS Lucid Wing PDB\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x TBS Lucid H7 FC\u003c\/li\u003e\n\u003cli\u003e1x FC-to-ESC cable (plug and play)\u003c\/li\u003e\n\u003cli\u003e1x DJI O3 cable (plug and play)\u003c\/li\u003e\n\u003cli\u003e4x M3 rubber dampers\u003c\/li\u003e\n\u003cli\u003e4x M3x8 screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eUnits bought before 25 August 2025 that show boot-up issues on ArduPilot should be updated to ArduPilot 4.6.1 or newer.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default Title","offer_id":46435885973538,"sku":"AF-TBS-LUCID-H7-FC","price":7299.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302727.jpg?v=1787068259"},{"product_id":"tbs-unify-pro32-dp-heatsink","title":"TBS Unify Pro32 DP Heatsink","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe TBS Unify Pro32 DP heatsink fits onto the Unify Pro32 DP video transmitter to keep its power amplifiers from overheating — essential at high output or where airflow is limited, as an overheating VTX automatically reduces its output power. Tip: lightly score the screw holes with a 2mm drill bit so the heatsink sits firmly against the PCB.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/UP32DP_render-01-8.jpg\" alt=\"TBS Unify Pro32 DP Heatsink\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/UP32DP_render-01-6p.jpg\" alt=\"TBS Unify Pro32 DP Heatsink\"\u003e\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eTeam BlackSheep (TBS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible\u003c\/th\u003e\n\u003ctd\u003eTBS Unify Pro32 DP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003esilver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e TBS Unify Pro32 DP only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not fit:\u003c\/strong\u003e the Unify Pro32 HV or Unify Pro 5G8 HV - different board size.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/tbs-unify-pro32-dp-mmcx\"\u003eTBS Unify Pro32 DP MMCX\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eVTX not included.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1x TBS Unify Pro32 DP heatsink\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default Title","offer_id":68693326561314,"sku":"AF-TBS-UNIFY-PRO32-DP-HEATSINK","price":269.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/tbs-unify-pro32-dp-heat-sink-_image-1.jpg?v=1792096342"},{"product_id":"15mm-adhesive-cloth-fabric-tape","title":"TBS 15mm Adhesive Cloth Fabric Tape","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003e15mm cloth fabric tape is made for one job FPV pilots know well: keeping motor wires tidy and secure along your quad's arms. Electrical tape often loses its grip, especially in cold weather, and zip ties can leave sharp edges that cut into the wire insulation. This fabric tape holds firmly whatever the temperature and won't damage your cables.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eKeeps motor wires in place along frame arms\u003c\/li\u003e\n\u003cli\u003eSticks well, even in cold weather\u003c\/li\u003e\n\u003cli\u003eDurable cloth fabric backing\u003c\/li\u003e\n\u003cli\u003eNo sharp edges to cut into wires, unlike zip ties\u003c\/li\u003e\n\u003cli\u003e15mm wide, 30m roll\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e30m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCloth fabric, adhesive backed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x 15mm adhesive cloth fabric tape roll (30m)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWrap motor leads on frames like the \u003ca href=\"\/products\/aos-5-v5-1-frame-kit\"\u003eAOS 5 V5.1\u003c\/a\u003e and \u003ca href=\"\/products\/axisflying-bando-5-frame-kit\"\u003eAxisflying Bando 5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors such as the \u003ca href=\"\/products\/axisflying-ae2505-motor\"\u003eAxisflying AE2505\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"30m","offer_id":68693414019106,"sku":"AF-GEN-15MM-ADHESIVE-CLOTH","price":819.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7301504.jpg?v=1793192421"},{"product_id":"tbs-lucid-dronecan-airspeed-sensor","title":"TBS Lucid DroneCAN Airspeed Sensor","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe TBS Lucid DroneCAN Airspeed Sensor is a digital airspeed sensor that is plug and play with TBS Lucid DroneCAN flight controllers. It works over DroneCAN or directly over I2C (MS4525DO mode), and comes with a stainless-steel pitot tube, silicone tubing and two CAN cables.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302973.jpg\" alt=\"TBS Lucid DroneCAN Airspeed Sensor\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eDroneCAN and I2C interfaces on JST-GH connectors\u003c\/li\u003e\n\u003cli\u003eMeasures up to 100 m\/s (360 km\/h) with ±2.0% accuracy\u003c\/li\u003e\n\u003cli\u003eStatus LEDs show CAN communication with the flight controller\u003c\/li\u003e\n\u003cli\u003eStainless-steel pitot tube included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302971.jpg\" alt=\"TBS Lucid DroneCAN Airspeed Sensor\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eCAN (DroneCAN) and I2C (MS4525DO mode, address 0x28)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnectors\u003c\/th\u003e\n\u003ctd\u003eJST-GH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e4–6V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption\u003c\/th\u003e\n\u003ctd\u003e60mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAirspeed range\u003c\/th\u003e\n\u003ctd\u003eup to 100 m\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAccuracy\u003c\/th\u003e\n\u003ctd\u003e±2.0%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e−20 to 85°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e35 x 22 x 12mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e4g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eArduPilot setup\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDroneCAN\u003c\/th\u003e\n\u003ctd\u003eCAN_P1_DRIVER = 1, ARSPD_TYPE = 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eI2C\u003c\/th\u003e\n\u003ctd\u003eARSPD_TYPE = 9, ARSPD_USE = 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x TBS Lucid DroneCAN Airspeed Sensor\u003c\/li\u003e\n\u003cli\u003e1x pitot tube with silicone tube\u003c\/li\u003e\n\u003cli\u003e2x CAN bus cables (4-pin, 20cm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/tbs-lucid-h7-wing-fc\"\u003eTBS Lucid H7 Wing FC\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/tbs-lucid-h7-fc\"\u003eTBS Lucid H7 FC\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default Title","offer_id":68693418901538,"sku":"AF-TBS-LUCID-DRONECAN-AIRSPEED","price":9999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302972.jpg?v=1792096339"},{"product_id":"tbs-lucid-pdb-500a","title":"TBS Lucid PDB 500A","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe TBS Lucid PDB 500A is a high-power power distribution board for large multirotors, cinelifters and octocopters that use individual ESCs. An 8-layer, 3oz copper, 3mm-thick PCB handles up to 500A continuous, and it plugs straight into TBS Lucid flight controllers.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302719.jpg\" alt=\"TBS Lucid PDB 500A\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003e500A continuous rating\u003c\/li\u003e\n\u003cli\u003eSupports up to 8 individual ESCs (X8 \/ octo)\u003c\/li\u003e\n\u003cli\u003e8-layer 3oz copper PCB, 3mm thick\u003c\/li\u003e\n\u003cli\u003eTelemetry pad, VBAT sense pad and external current sensor support\u003c\/li\u003e\n\u003cli\u003ePlug-and-play with Lucid flight controllers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/image_2025_01_08T06_56_40_748Z-_281_29.jpg\" alt=\"TBS Lucid PDB 500A\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eContinuous current\u003c\/th\u003e\n\u003ctd\u003e500A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eESC channels\u003c\/th\u003e\n\u003ctd\u003eup to 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003ehigh-voltage capable (14S confirmed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e58 x 62mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003e30.5 x 30.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e36g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot an ESC or FC\u003c\/strong\u003e - it distributes power to up to eight single ESCs and passes their signals to the flight controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlight controller:\u003c\/strong\u003e plugs straight into TBS Lucid FCs; other 30.5 x 30.5mm FCs with 8 motor outputs can be wired by hand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo BEC on the PDB\u003c\/strong\u003e - the flight controller (or ESC BECs) must regulate its own supply. Check your FC's input voltage limit against pack voltage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSingle ESCs: \u003ca href=\"\/products\/tbs-lucid-12s-90a-esc\"\u003eTBS Lucid 12S 90A\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-s100-8s-bls-100a-esc-with-case-version\"\u003eGEPRC TAKER S100\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFlight controller: \u003ca href=\"\/products\/tbs-lucid-h7-fc\"\u003eTBS Lucid H7 FC\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors: \u003ca href=\"\/products\/iflight-xing-e-5215-motor-300kv\"\u003eiFlight XING-E 5215\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1x TBS Lucid PDB 500A\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default Title","offer_id":68693449867298,"sku":"AF-TBS-LUCID-PDB-500A","price":1749.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302718.jpg?v=1792096338"},{"product_id":"tbs-lucid-wing-pdb","title":"TBS Lucid Wing PDB","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe TBS Lucid Wing PDB is a power distribution board for fixed-wing builds with up to four servos and one or two motors. It works with 20x20 and 30.5x30.5 flight controllers (TBS Lucid H7 or Lucid 20x20 recommended), provides dedicated 12V and 6V servo rails, and handles up to 14S input.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302827.jpg\" alt=\"TBS Lucid Wing PDB\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003e12V 4A rail for FC, LEDs and accessories\u003c\/li\u003e\n\u003cli\u003e6V 4A rail for servos\u003c\/li\u003e\n\u003cli\u003eUp to 60V (14S) input\u003c\/li\u003e\n\u003cli\u003eCurrent sensor: 90A continuous, 200A burst\u003c\/li\u003e\n\u003cli\u003eSwitchable FC supply: VBat or 12V\u003c\/li\u003e\n\u003cli\u003eOnboard plugs for analog camera, analog VTX, 12V COB LEDs and TBS M10 GPS\u003c\/li\u003e\n\u003cli\u003eSupports BLHeli\/AM32 ESCs with telemetry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302822.jpg\" alt=\"TBS Lucid Wing PDB\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302825.jpg\" alt=\"TBS Lucid Wing PDB\"\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor planes and wings\u003c\/strong\u003e - up to four servos (6V rail) and one or two motor ESCs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServos:\u003c\/strong\u003e the servo rail is 6V - make sure your servos are rated for 6V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlight controller:\u003c\/strong\u003e 20x20 or 30.5x30.5 FCs; TBS Lucid H7 recommended. Switch the FC supply to 12V if your FC is not rated for full pack voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent sensor:\u003c\/strong\u003e 90A continuous - for higher-current planes use the Lucid H7 Wing FC (165A sensor).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlight controller: \u003ca href=\"\/products\/tbs-lucid-h7-fc\"\u003eTBS Lucid H7 FC\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eESC: \u003ca href=\"\/products\/tbs-lucid-12s-90a-esc\"\u003eTBS Lucid 12S 90A\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGPS: \u003ca href=\"\/products\/tbs-m10-gps-glonass-module\"\u003eTBS M10 GPS\u003c\/a\u003e (plugs into the PDB)\u003c\/li\u003e\n\u003cli\u003eAirspeed: \u003ca href=\"\/products\/tbs-lucid-dronecan-airspeed-sensor\"\u003eTBS Lucid DroneCAN Airspeed Sensor\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x TBS Lucid Wing PDB\u003c\/li\u003e\n\u003cli\u003e1x FC peripheral cable set\u003c\/li\u003e\n\u003cli\u003e1x servo pin header set (2x20)\u003c\/li\u003e\n\u003cli\u003e1x hardware kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default Title","offer_id":68693449932834,"sku":"AF-TBS-LUCID-WING-PDB","price":2099.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/tbs-lucid-wing-pdb-_image-2.jpg?v=1792096338"},{"product_id":"tbs-lucid-h7-wing-fc","title":"TBS Lucid H7 Wing FC","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe TBS Lucid H7 Wing FC is a fixed-wing and VTOL flight controller built to be full-featured, versatile and affordable. It is supplied as a sandwiched FC and power board, with an STM32H743, dual gyros, a 165A current sensor, a selectable 8A servo BEC and a 5A FPV BEC, and it runs ArduPilot (TBS_LUCID_H7_WING).\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302926.png\" alt=\"TBS Lucid H7 Wing FC\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eSTM32H743 with dual ICM42688 gyros and DPS310 barometer\u003c\/li\u003e\n\u003cli\u003e3–12S input (8–50.4V)\u003c\/li\u003e\n\u003cli\u003eServo\/output BEC 8A continuous (10A peak), selectable 5V \/ 6V \/ 8.4V\u003c\/li\u003e\n\u003cli\u003eFPV BEC 9V or 12V at 5A; separate 5V 3A BEC for FC and peripherals\u003c\/li\u003e\n\u003cli\u003e165A continuous \/ 240A peak current sensor\u003c\/li\u003e\n\u003cli\u003eSwitchable dual camera inputs with AT7456E OSD; DJI-style connector with SBUS and OSD for digital FPV\u003c\/li\u003e\n\u003cli\u003e7 UARTs, 2x I2C, 1x CAN, microSD blackbox, 13 PWM outputs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302927.jpg\" alt=\"TBS Lucid H7 Wing FC\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302936.jpg\" alt=\"TBS Lucid H7 Wing FC\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMCU\u003c\/th\u003e\n\u003ctd\u003eSTM32H743\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGyro\u003c\/th\u003e\n\u003ctd\u003e2x ICM42688 (SPI1 and SPI4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBarometer\u003c\/th\u003e\n\u003ctd\u003eDPS310 (I2C2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutputs\u003c\/th\u003e\n\u003ctd\u003e13x PWM (including LED)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eADC\u003c\/th\u003e\n\u003ctd\u003eVbat, current, CB2, CU2, RSSI, airspeed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e8–50.4V (3–12S)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e54 x 36 x 13mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage sensor\u003c\/th\u003e\n\u003ctd\u003e1K:20K (INAV scale 2100, ArduPilot BATT_VOLT_MULT 21.0)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFirmware\u003c\/th\u003e\n\u003ctd\u003eArduPilot TBS_LUCID_H7_WING (INAV and Betaflight targets to be announced by TBS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e ArduPilot today - INAV and Betaflight targets are not yet released, so do not buy it for INAV-only setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServo BEC:\u003c\/strong\u003e set 5V \/ 6V \/ 8.4V to match your servos - 8.4V only for HV servos.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e servo pin headers ship unsoldered.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 3-12S. Needs a separate ESC for each motor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/tbs-lucid-dronecan-airspeed-sensor\"\u003eTBS Lucid DroneCAN Airspeed Sensor\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/tbs-m10-gps-glonass-module\"\u003eTBS M10 GPS\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/tbs-lucid-12s-90a-esc\"\u003eTBS Lucid 12S 90A ESC\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x TBS Lucid H7 Wing FC and PDB (sandwiched boards)\u003c\/li\u003e\n\u003cli\u003e1x USB-C \/ buzzer extender board\u003c\/li\u003e\n\u003cli\u003e1x 10cm JST-SH-6P cable (USB extender)\u003c\/li\u003e\n\u003cli\u003e1x 25cm JST-SH-6P cable (HD systems)\u003c\/li\u003e\n\u003cli\u003e2x 20cm JST-GH-4P cables (CAN and I2C)\u003c\/li\u003e\n\u003cli\u003e1x 330uF 63V capacitor\u003c\/li\u003e\n\u003cli\u003e120x 2.54mm pin headers (unsoldered – assembly required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default Title","offer_id":68693449965602,"sku":"AF-TBS-LUCID-H7-WING","price":7999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302925.png?v=1792096340"},{"product_id":"tbs-source-one-v5-1-5-inch-frame","title":"TBS Source One V5.1 5 Inch Frame","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eTBS Source One V5.1 5 inch\u003c\/strong\u003e is Team BlackSheep's open-source 5-inch workhorse – a wide-stance X frame for freestyle and free-range acro. It is built to take hard crashes, fits all the classic FPV components, and stays light, making it an easy, affordable everyday frame that is simple to repair. The V5.1 revision adds mounting holes for the TBS Lucid stack.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide-stance X geometry\u003c\/strong\u003e – stable, predictable handling for freestyle and acro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6mm arms\u003c\/strong\u003e with a 2.5mm bottom plate – soaks up crashes and protects the stack and battery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible stack mounting\u003c\/strong\u003e – fits 30.5x30.5mm and 20x20mm stacks, plus dedicated TBS Lucid stack holes (new in V5.1).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo standoff heights\u003c\/strong\u003e – 30mm and 22mm for standard or low-profile builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog or digital\u003c\/strong\u003e – room for DJI, Walksnail, Caddx or analog video.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight\u003c\/strong\u003e – about 123.5g, the lightest Source One.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen-source design\u003c\/strong\u003e – cheap, well documented and easy to find spares for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLayout\u003c\/th\u003e\n\u003ctd\u003eWide-stance X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheelbase\u003c\/th\u003e\n\u003ctd\u003e226mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePropeller size\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm thickness\u003c\/th\u003e\n\u003ctd\u003e6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlates\u003c\/th\u003e\n\u003ctd\u003eTop 2mm \/ middle 2mm \/ bottom 2.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCamera plate\u003c\/th\u003e\n\u003ctd\u003e2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStack mounting\u003c\/th\u003e\n\u003ctd\u003e30.5x30.5mm and 20x20mm, plus TBS Lucid holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandoffs\u003c\/th\u003e\n\u003ctd\u003e30mm and 22mm (M3, 5mm OD)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrame weight\u003c\/th\u003e\n\u003ctd\u003eapprox. 123.5g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStack:\u003c\/strong\u003e 30.5x30.5 or 20x20mm, with 30mm standoffs giving room for tall stacks. Direct mounting holes for the TBS Lucid stack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotors \/ props:\u003c\/strong\u003e 5\" props with 2207-class motors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3D-printed parts\u003c\/strong\u003e (camera and antenna mounts) are not included – print or buy separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther versions:\u003c\/strong\u003e the newer \u003ca href=\"\/products\/tbs-source-one-v6-5-inch-frame\"\u003eV6 5 inch\u003c\/a\u003e includes a TPU camera mount; for long range see the \u003ca href=\"\/products\/tbs-source-one-v6-7-inch-dc-frame\"\u003eV6 7 inch DC\u003c\/a\u003e or \u003ca href=\"\/products\/tbs-source-one-v5-1-7-inch-dc-frame\"\u003eV5.1 7 inch DC\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStacks: \u003ca href=\"\/products\/tbs-lucid-freestyle-stack-6s-60a\"\u003eTBS Lucid Freestyle 60A\u003c\/a\u003e (direct-mount holes), \u003ca href=\"\/products\/speedybee-f405-v5-ox32-55a-stack\"\u003eSpeedyBee F405 V5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors \/ props: \u003ca href=\"\/products\/t-motor-velox-v3-2207-motor\"\u003eT-Motor Velox V3 2207\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalog VTX: \u003ca href=\"\/products\/tbs-unify-pro32-hv-mmcx\"\u003eTBS Unify Pro32 HV\u003c\/a\u003e; GPS \u003ca href=\"\/products\/tbs-m10-gps-glonass-module\"\u003eTBS M10\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Frame set: top, middle and bottom plates, brace, 2x camera plates, 4x arms, 1x arm spacer\u003c\/li\u003e\n\u003cli\u003e16x M3x10, 4x M3x12 and 4x M3x14 Allen screws\u003c\/li\u003e\n\u003cli\u003e4x 30mm and 4x 22mm M3 standoffs (5mm OD)\u003c\/li\u003e\n\u003cli\u003e8x M3 press-in nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eFrame kit only – motors, electronics, camera, props and battery are not included.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default Title","offer_id":68693562392610,"sku":"AF-TBS-SOURCE-ONE-V5.15IN","price":3799.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7301981.jpg?v=1792454910"},{"product_id":"tbs-unify-pro32-hv-mmcx","title":"TBS Unify Pro32 HV MMCX","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe TBS Unify Pro32 HV (MMCX) is a 5.8GHz analog video transmitter with up to 1000mW output, lower power draw and a more robust RF amplifier than earlier Unify models. It runs directly from 2–6S, supports SmartAudio and CRSF control, and its CleanSwitch power-up never interferes with other pilots.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/TBS-Unify-Pro-32-HV-MMCX-Video-Transmitter-TX-2.jpg\" alt=\"TBS Unify Pro32 HV MMCX\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eUp to 1000mW+ output, plus pit mode\u003c\/li\u003e\n\u003cli\u003eCleanSwitch — no interference on power-up or channel change\u003c\/li\u003e\n\u003cli\u003eSmartAudio V2.1 and CRSF remote control; button menu fallback\u003c\/li\u003e\n\u003cli\u003eAmplifier survives running without an antenna for extended periods\u003c\/li\u003e\n\u003cli\u003eDouble-deck design for cooling and durability; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/TBS-Unify-Pro-32-HV-MMCX-Video-Transmitter-TX-5.jpg\" alt=\"TBS Unify Pro32 HV MMCX\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput power\u003c\/th\u003e\n\u003ctd\u003e25 \/ 100 \/ 400 \/ 1000mW+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency\u003c\/th\u003e\n\u003ctd\u003e5.8GHz (licence-free channels enabled by default)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVideo format\u003c\/th\u003e\n\u003ctd\u003eNTSC\/PAL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003e6–25V (2–6S)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAntenna connector\u003c\/th\u003e\n\u003ctd\u003eMMCX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e37 x 25 x 5.8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e8.7g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGoggles:\u003c\/strong\u003e any 5.8GHz analog goggle or receiver. Not DJI, Walksnail or HDZero.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlight controller:\u003c\/strong\u003e SmartAudio V2.1 or CRSF control (Betaflight, INAV, TBS Crossfire).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna:\u003c\/strong\u003e MMCX - the included pigtail adapts to SMA frame mounts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePro32 HV or Pro32 DP?\u003c\/strong\u003e HV is the 1W standard-band unit; the \u003ca href=\"\/products\/tbs-unify-pro32-dp-mmcx\"\u003ePro32 DP\u003c\/a\u003e is the 3W wideband long-range version.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGoggles: \u003ca href=\"\/products\/skyzone-cobra-x-v4-5-8ghz-fpv-goggles\"\u003eSkyzone Cobra X V4\u003c\/a\u003e, \u003ca href=\"\/products\/hdzero-goggle-2-with-echo-antenna-kit\"\u003eHDZero Goggle 2\u003c\/a\u003e, \u003ca href=\"\/products\/skyzone-cobra-sd-5-8ghz-fpv-goggles\"\u003eCobra SD\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMMCX antennas: \u003ca href=\"\/products\/tbs-5g8-mmcx-linear-antenna\"\u003eTBS 5G8 MMCX\u003c\/a\u003e, \u003ca href=\"\/products\/foxeer-lollipop-4-antenna\"\u003eFoxeer Lollipop 4\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eCameras: \u003ca href=\"\/products\/caddx-ratel-pro\"\u003eCaddx Ratel Pro\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x TBS Unify Pro32 HV (MMCX)\u003c\/li\u003e\n\u003cli\u003e1x silicone cable (pre-tinned)\u003c\/li\u003e\n\u003cli\u003e1x MMCX to SMA pigtail\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default Title","offer_id":68693782298658,"sku":"AF-TBS-UNIFY-PRO32-HV","price":5699.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/TBS-Unify-Pro-32-HV-MMCX-Video-Transmitter-TX-1.jpg?v=1792096337"},{"product_id":"tbs-airscrew","title":"TBS Airscrew","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe TBS Airscrew is a licensed interpretation of the VAS Airscrew, designed by IBCrazy and manufactured by Team BlackSheep. Five multi-phase elements give it a clean circular radiation pattern that rejects cross-polarised signals while covering an extremely wide band, 4900–6100MHz. Its long connector stem suits long-range video links and omni reception on goggles or ground stations.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eFrequency: 4900–6100MHz (wideband 5.8GHz)\u003c\/li\u003e\n\u003cli\u003ePolarisation: RHCP\u003c\/li\u003e\n\u003cli\u003eGain: 1.3dBic\u003c\/li\u003e\n\u003cli\u003eAxial ratio: 0.95\u003c\/li\u003e\n\u003cli\u003eHeight: 130mm\u003c\/li\u003e\n\u003cli\u003eWeight: 20g (SMA and SMA 90°), 10g (MMCX)\u003c\/li\u003e\n\u003cli\u003eUltrasonically welded plastic case for crash protection\u003c\/li\u003e\n\u003cli\u003eDouble-jacket semi-rigid cable for heavy impact resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing a connector\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSMA\u003c\/strong\u003e - straight SMA, for goggles, VRX modules and VTXs with an SMA port. Not RP-SMA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSMA 90°\u003c\/strong\u003e - right-angle SMA, for mounting where the antenna has to sit sideways, e.g. on the back of a quad or the side of a goggle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMMCX\u003c\/strong\u003e - plugs directly into MMCX-port VTXs such as the TBS Unify Pro32 series, no pigtail needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRHCP\u003c\/strong\u003e - the antenna at the other end of the link must also be RHCP. Mixing RHCP and LHCP costs a lot of signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOmnidirectional\u003c\/strong\u003e - good on the quad, or as the omni on one goggle diversity port alongside a patch on the other.\u003c\/li\u003e\n\u003cli\u003eAt 130mm tall it is a long-range \/ cruiser antenna rather than a whoop or racing antenna.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1x TBS Airscrew antenna (connector as selected)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVTX, SMA version: \u003ca href=\"\/products\/tbs-unify-pro-5g8-hv-sma\"\u003eTBS Unify Pro 5G8 HV SMA\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eVTX, MMCX version: \u003ca href=\"\/products\/tbs-unify-pro32-hv-mmcx\"\u003eTBS Unify Pro32 HV MMCX\u003c\/a\u003e, \u003ca href=\"\/products\/tbs-unify-pro32-dp-mmcx\"\u003eTBS Unify Pro32 DP MMCX\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGoggles, SMA version: \u003ca href=\"\/products\/skyzone-cobra-x-v4-5-8ghz-fpv-goggles\"\u003eSkyzone Cobra X V4\u003c\/a\u003e, \u003ca href=\"\/products\/skyzone-cobra-sd-5-8ghz-fpv-goggles\"\u003eSkyzone Cobra SD\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"SMA \/ RHCP","offer_id":69441868202018,"sku":"AF-TBS-AIRSCREW-SMA","price":2099.0,"currency_code":"INR","in_stock":true},{"title":"SMA 90° \/ RHCP","offer_id":69441868234786,"sku":"AF-TBS-AIRSCREW-SMA90","price":2099.0,"currency_code":"INR","in_stock":false},{"title":"MMCX \/ RHCP","offer_id":69441868267554,"sku":"AF-TBS-AIRSCREW-MMCX","price":2099.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/ARS5G4_render-01-3-wb.png?v=1793018148"},{"product_id":"tbs-source-one-v6-7-inch-dc-frame","title":"TBS Source One V6 7 Inch DC Frame","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eTBS Source One V6 7 inch DC\u003c\/strong\u003e is the latest 7-inch Deadcat in Team BlackSheep's open-source Source One family, built for long-range freestyle and relaxed cruising. The Deadcat layout swings the front arms wide so your 7\" props stay out of the camera view, giving clean HD footage without cropping. Like every Source One it is built to survive hard crashes, fits all the classic FPV components, and keeps weight down.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeadcat geometry\u003c\/strong\u003e – props out of the shot for clean long-range footage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6mm arms\u003c\/strong\u003e with a 2.5mm bottom plate – soaks up crashes and protects the stack and battery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible stack mounting\u003c\/strong\u003e – fits both 30.5x30.5mm and 20x20mm stacks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo standoff heights\u003c\/strong\u003e – 30mm and 22mm for standard or low-profile builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog or digital\u003c\/strong\u003e – room for DJI, Walksnail, Caddx or analog video.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3D-printed camera mount included\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen-source design\u003c\/strong\u003e – cheap, well documented and easy to find spares for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLayout\u003c\/th\u003e\n\u003ctd\u003eDeadcat (DC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheelbase\u003c\/th\u003e\n\u003ctd\u003e313mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePropeller size\u003c\/th\u003e\n\u003ctd\u003e7\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm thickness\u003c\/th\u003e\n\u003ctd\u003e6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlates\u003c\/th\u003e\n\u003ctd\u003eTop 2mm \/ middle 2mm \/ bottom 2.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCamera plate\u003c\/th\u003e\n\u003ctd\u003e2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm spacer\u003c\/th\u003e\n\u003ctd\u003e6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStack mounting\u003c\/th\u003e\n\u003ctd\u003e30.5x30.5mm and 20x20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandoffs\u003c\/th\u003e\n\u003ctd\u003e30mm and 22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrame weight\u003c\/th\u003e\n\u003ctd\u003eapprox. 173g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStack:\u003c\/strong\u003e 30.5x30.5 or 20x20mm, with 30mm standoffs giving room for tall stacks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotors \/ props:\u003c\/strong\u003e 7\" props with 2806–2809 class motors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther versions:\u003c\/strong\u003e the \u003ca href=\"\/products\/tbs-source-one-v5-1-7-inch-dc-frame\"\u003eV5.1 7 inch DC\u003c\/a\u003e is the previous-generation 7\" Deadcat; for 5\" see the \u003ca href=\"\/products\/tbs-source-one-v6-5-inch-frame\"\u003eV6 5 inch\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStacks: \u003ca href=\"\/products\/tbs-lucid-freestyle-stack-6s-60a\"\u003eTBS Lucid Freestyle 60A\u003c\/a\u003e, \u003ca href=\"\/products\/speedybee-f405-v5-55a-stack-standard\"\u003eSpeedyBee F405 V5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors \/ props: \u003ca href=\"\/products\/geprc-speedx2-2809-motor-1280kv\"\u003eGEPRC SPEEDX2 2809\u003c\/a\u003e, \u003ca href=\"\/products\/gemfan-flash-7040-3-propeller\"\u003eGemfan Flash 7040-3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalog VTX: \u003ca href=\"\/products\/tbs-unify-pro32-hv-mmcx\"\u003eTBS Unify Pro32 HV\u003c\/a\u003e; GPS \u003ca href=\"\/products\/tbs-m10-gps-glonass-module\"\u003eTBS M10\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Frame set: top, middle and bottom plates, brace, 2x camera plates, 4x arms, 1x arm spacer\u003c\/li\u003e\n\u003cli\u003e16x M3x10, 4x M3x12 and 4x M3x14 Allen screws\u003c\/li\u003e\n\u003cli\u003e4x 30mm, 4x 22mm and 2x 20mm M3 standoffs (5mm OD)\u003c\/li\u003e\n\u003cli\u003e8x M3 press-in nuts\u003c\/li\u003e\n\u003cli\u003e1x 3D-printed camera mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eFrame kit only – motors, electronics, camera, props and battery are not included.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default Title","offer_id":69454008156194,"sku":"AF-TBS-SOURCE-ONE-V67INDC","price":4399.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/TBS-Source-One-V6-7inch.jpg?v=1792096349"},{"product_id":"tbs-source-one-v6-5-inch-frame","title":"TBS Source One V6 5 Inch Frame","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eTBS Source One V6 5 inch\u003c\/strong\u003e is the latest version of Team BlackSheep's open-source 5-inch workhorse – a wide-stance X frame for freestyle and free-range acro. It is built to take hard crashes, fits all the classic FPV components, and stays light, making it an easy, affordable everyday frame that is simple to repair.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide-stance X geometry\u003c\/strong\u003e – stable, predictable handling for freestyle and acro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6mm arms\u003c\/strong\u003e with a 2.5mm bottom plate – soaks up crashes and protects the stack and battery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible stack mounting\u003c\/strong\u003e – fits both 30.5x30.5mm and 20x20mm stacks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo standoff heights\u003c\/strong\u003e – 30mm and 22mm for standard or low-profile builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog or digital\u003c\/strong\u003e – room for DJI, Walksnail, Caddx or analog video.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTPU camera mount included\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen-source design\u003c\/strong\u003e – cheap, well documented and easy to find spares for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLayout\u003c\/th\u003e\n\u003ctd\u003eWide-stance X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheelbase\u003c\/th\u003e\n\u003ctd\u003e240mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePropeller size\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm thickness\u003c\/th\u003e\n\u003ctd\u003e6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlates\u003c\/th\u003e\n\u003ctd\u003eTop 2mm \/ middle 2mm \/ bottom 2.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCamera plate\u003c\/th\u003e\n\u003ctd\u003e2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm spacer\u003c\/th\u003e\n\u003ctd\u003e6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStack mounting\u003c\/th\u003e\n\u003ctd\u003e30.5x30.5mm and 20x20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandoffs\u003c\/th\u003e\n\u003ctd\u003e30mm and 22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrame weight\u003c\/th\u003e\n\u003ctd\u003eapprox. 136.5g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStack:\u003c\/strong\u003e 30.5x30.5 or 20x20mm, with 30mm standoffs giving room for tall stacks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotors \/ props:\u003c\/strong\u003e 5\" props with 2207-class motors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther versions:\u003c\/strong\u003e the \u003ca href=\"\/products\/tbs-source-one-v5-1-5-inch-frame\"\u003eV5.1 5 inch\u003c\/a\u003e is the previous generation; for long range see the \u003ca href=\"\/products\/tbs-source-one-v6-7-inch-dc-frame\"\u003eV6 7 inch DC\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStacks: \u003ca href=\"\/products\/tbs-lucid-freestyle-stack-6s-60a\"\u003eTBS Lucid Freestyle 60A\u003c\/a\u003e, \u003ca href=\"\/products\/speedybee-f405-v5-ox32-55a-stack\"\u003eSpeedyBee F405 V5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors \/ props: \u003ca href=\"\/products\/t-motor-velox-v3-2207-motor\"\u003eT-Motor Velox V3 2207\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalog VTX: \u003ca href=\"\/products\/tbs-unify-pro32-hv-mmcx\"\u003eTBS Unify Pro32 HV\u003c\/a\u003e; GPS \u003ca href=\"\/products\/tbs-m10-gps-glonass-module\"\u003eTBS M10\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Frame set: top, middle and bottom plates, brace, 2x camera plates, 4x arms, 1x arm spacer\u003c\/li\u003e\n\u003cli\u003e20x M3x10, 4x M3x12 and 4x M3x14 Allen screws\u003c\/li\u003e\n\u003cli\u003e4x 30mm, 4x 22mm and 1x 20mm M3 standoffs\u003c\/li\u003e\n\u003cli\u003e8x M3 press-in nuts\u003c\/li\u003e\n\u003cli\u003e1x TPU 3D-printed camera mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eFrame kit only – motors, electronics, camera, props and battery are not included.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default Title","offer_id":69454017593378,"sku":"AF-TBS-SOURCE-ONE-V65IN","price":3649.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302997.jpg?v=1793036441"},{"product_id":"tbs-source-one-v5-1-7-inch-dc-frame","title":"TBS Source One V5.1 7 Inch DC Frame","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eTBS Source One V5.1 7 inch DC\u003c\/strong\u003e is the 7-inch Deadcat from Team BlackSheep's open-source Source One family, built for long-range freestyle and cruising. The Deadcat layout swings the front arms wide so your 7\" props stay out of the camera view. It is built to survive hard crashes, fits all the classic FPV components, and is optimised for low weight.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeadcat geometry\u003c\/strong\u003e – props out of the shot for clean long-range footage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6mm arms\u003c\/strong\u003e with a 2.5mm bottom plate – soaks up crashes and protects the stack and battery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible stack mounting\u003c\/strong\u003e – fits both 30.5x30.5mm and 20x20mm stacks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo standoff heights\u003c\/strong\u003e – 30mm and 22mm for standard or low-profile builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog or digital\u003c\/strong\u003e – room for DJI, Walksnail, Caddx or analog video.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight for a 7\"\u003c\/strong\u003e – about 143.5g, lighter than the newer V6 7\" DC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen-source design\u003c\/strong\u003e – cheap, well documented and easy to find spares for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLayout\u003c\/th\u003e\n\u003ctd\u003eDeadcat (DC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheelbase\u003c\/th\u003e\n\u003ctd\u003e320mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePropeller size\u003c\/th\u003e\n\u003ctd\u003e7\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm thickness\u003c\/th\u003e\n\u003ctd\u003e6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlates\u003c\/th\u003e\n\u003ctd\u003eTop 2mm \/ middle 2mm \/ bottom 2.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCamera plate\u003c\/th\u003e\n\u003ctd\u003e2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm spacer\u003c\/th\u003e\n\u003ctd\u003e6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStack mounting\u003c\/th\u003e\n\u003ctd\u003e30.5x30.5mm and 20x20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandoffs\u003c\/th\u003e\n\u003ctd\u003e30mm and 22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrame weight\u003c\/th\u003e\n\u003ctd\u003eapprox. 143.5g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStack:\u003c\/strong\u003e 30.5x30.5 or 20x20mm, with 30mm standoffs giving room for tall stacks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotors \/ props:\u003c\/strong\u003e 7\" props with 2806–2809 class motors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3D-printed parts\u003c\/strong\u003e (camera and antenna mounts) are not included – print or buy separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther versions:\u003c\/strong\u003e the newer \u003ca href=\"\/products\/tbs-source-one-v6-7-inch-dc-frame\"\u003eV6 7 inch DC\u003c\/a\u003e includes a printed camera mount; for 5\" see the \u003ca href=\"\/products\/tbs-source-one-v5-1-5-inch-frame\"\u003eV5.1 5 inch\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStacks: \u003ca href=\"\/products\/tbs-lucid-freestyle-stack-6s-60a\"\u003eTBS Lucid Freestyle 60A\u003c\/a\u003e, \u003ca href=\"\/products\/speedybee-f405-v5-55a-stack-standard\"\u003eSpeedyBee F405 V5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors \/ props: \u003ca href=\"\/products\/geprc-speedx2-2809-motor-1280kv\"\u003eGEPRC SPEEDX2 2809\u003c\/a\u003e, \u003ca href=\"\/products\/gemfan-flash-7040-3-propeller\"\u003eGemfan Flash 7040-3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalog VTX: \u003ca href=\"\/products\/tbs-unify-pro32-hv-mmcx\"\u003eTBS Unify Pro32 HV\u003c\/a\u003e; GPS \u003ca href=\"\/products\/tbs-m10-gps-glonass-module\"\u003eTBS M10\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Frame set: top, middle and bottom plates, brace, 2x camera plates, 4x arms, 1x arm spacer\u003c\/li\u003e\n\u003cli\u003e16x M3x10, 4x M3x12 and 4x M3x14 Allen screws\u003c\/li\u003e\n\u003cli\u003e4x 30mm and 4x 22mm M3 standoffs (5mm OD)\u003c\/li\u003e\n\u003cli\u003e8x M3 press-in nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eFrame kit only – motors, electronics, camera, props and battery are not included.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default Title","offer_id":69454018117666,"sku":"AF-TBS-SOURCE-ONE-V5.17INDC","price":4799.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302331.jpg?v=1793036616"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/collections\/tbs.jpg?v=1792193313","url":"https:\/\/aeroflow.in\/collections\/tbs.oembed?page=2","provider":"AeroFlow","version":"1.0","type":"link"}