{"title":"GPS","description":"\u003cp\u003eGPS modules that add positioning, return-to-home, and telemetry data to your FPV drone.\u003c\/p\u003e","products":[{"product_id":"geprc-gep-m1025-series-gps-module","title":"GEPRC GEP-M1025 Series GPS Module","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEP-M1025 series is GEPRC's upgraded GPS line, built on the u-blox M10050 chip with a large 25x25mm ceramic antenna for stronger signal reception. It supports GPS + BDS + Galileo + QZSS + SBAS joint positioning across up to 32 satellites, with a built-in Flash chip and Farad capacitor that save configuration and give a fast hot start.\u003c\/p\u003e\n\u003cp\u003eThe series comes in seven models: a GPS-only version, or GPS with an optional \u003cstrong\u003eQMC5883L\u003c\/strong\u003e or \u003cstrong\u003eIST8310\u003c\/strong\u003e magnetometer and an optional \u003cstrong\u003eDPS310\u003c\/strong\u003e or \u003cstrong\u003eMS5611\u003c\/strong\u003e barometer. Pick the model that matches your flight controller and flight modes — suitable for most FPV quadcopters, multirotors and fixed-wing models.\u003c\/p\u003e\n\u003ch3\u003eChoose your model\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eMagnetometer (compass)\u003c\/th\u003e\n\u003cth\u003eBarometer\u003c\/th\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M1025\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eUART\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M1025Q\u003c\/td\u003e\n\u003ctd\u003eQMC5883L\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eUART + I2C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M1025-DQ\u003c\/td\u003e\n\u003ctd\u003eQMC5883L\u003c\/td\u003e\n\u003ctd\u003eDPS310\u003c\/td\u003e\n\u003ctd\u003eUART + I2C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M1025-MQ\u003c\/td\u003e\n\u003ctd\u003eQMC5883L\u003c\/td\u003e\n\u003ctd\u003eMS5611\u003c\/td\u003e\n\u003ctd\u003eUART + I2C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M1025I\u003c\/td\u003e\n\u003ctd\u003eIST8310\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eUART + I2C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M1025-DI\u003c\/td\u003e\n\u003ctd\u003eIST8310\u003c\/td\u003e\n\u003ctd\u003eDPS310\u003c\/td\u003e\n\u003ctd\u003eUART + I2C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M1025-MI\u003c\/td\u003e\n\u003ctd\u003eIST8310\u003c\/td\u003e\n\u003ctd\u003eMS5611\u003c\/td\u003e\n\u003ctd\u003eUART + I2C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eQ = QMC5883L compass, I = IST8310 compass, D = DPS310 baro, M = MS5611 baro.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eu-blox M10 series chip (M10050)\u003c\/li\u003e\n\u003cli\u003eGPS + BDS + Galileo + QZSS + SBAS joint positioning\u003c\/li\u003e\n\u003cli\u003eFast positioning, up to 32 satellites\u003c\/li\u003e\n\u003cli\u003eStable connection quality\u003c\/li\u003e\n\u003cli\u003e25x25mm ceramic antenna for better signal reception\u003c\/li\u003e\n\u003cli\u003eBuilt-in Flash chip and Farad capacitor for quick hot start\u003c\/li\u003e\n\u003cli\u003eOnboard indicator light\u003c\/li\u003e\n\u003cli\u003eOptional integrated magnetometer + barometer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPS chip:\u003c\/strong\u003e u-blox M10050\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage:\u003c\/strong\u003e 3.3V – 5V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceiving frequency:\u003c\/strong\u003e GPS L1, GLONASS L1, BDS B1, Galileo E1, SBAS L1, QZSS L1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels:\u003c\/strong\u003e 72\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellites:\u003c\/strong\u003e up to 32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput protocol:\u003c\/strong\u003e UART (u-blox); I2C for compass\/baro models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBaud rate:\u003c\/strong\u003e 115200 bps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpdate rate:\u003c\/strong\u003e 10Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed accuracy:\u003c\/strong\u003e 0.05 m\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorizontal accuracy:\u003c\/strong\u003e 2D 1.5m (open sky)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e tracking -162dBm, acquisition -160dBm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna:\u003c\/strong\u003e 25 x 25mm ceramic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWiring \u0026amp; setup\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPS:\u003c\/strong\u003e TX\/RX to a free UART on the flight controller (TX to RX, RX to TX), plus 5V and GND.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompass \/ baro models:\u003c\/strong\u003e connect SDA\/SCL to the FC's I2C pads. Without I2C the GPS still works for GPS Rescue \/ RTH, just without the compass and baro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e Betaflight 4.3 or newer (older versions don't support M10), INAV and ArduPilot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eINAV compass alignment:\u003c\/strong\u003e QMC5883 = CW 0° flip, IST8310 = CW 90° flip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e antenna facing up, away from the VTX, power leads and motors. For micro builds choose a nano GPS (e.g. \u003ca href=\"\/products\/tbs-m10n-nano-gps-glonass-module\"\u003eTBS M10N\u003c\/a\u003e).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFC \/ stacks with I2C: \u003ca href=\"\/products\/speedybee-f405-v5-ox32-55a-stack\"\u003eSpeedyBee F405 V5 Stack\u003c\/a\u003e, \u003ca href=\"\/products\/matek-h743-slim-v4-flight-controller\"\u003eMatek H743-SLIM V4\u003c\/a\u003e, \u003ca href=\"\/products\/micoair743-v2-am32-stack\"\u003eMicoAir743 V2 Stack\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-h743-bt-8bit-80a-stack\"\u003eGEPRC TAKER H743 Stack\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-f722-bt-8bit-60a-stack\"\u003eGEPRC TAKER F722 60A Stack\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFixed-wing FC: \u003ca href=\"\/products\/speedybee-f405-wing-app-fixed-wing-flight-controller\"\u003eSpeedyBee F405 Wing\u003c\/a\u003e, \u003ca href=\"\/products\/matek-wing-flight-controller-v3\"\u003eMatek Wing V3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eLong-range frame: \u003ca href=\"\/products\/geprc-gep-moz7-v2-frame\"\u003eGEPRC MOZ7 V2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x GPS module (model as selected)\u003c\/li\u003e\n\u003cli\u003e1 x terminal wire\u003c\/li\u003e\n\u003cli\u003e1 x instruction manual\u003c\/li\u003e\n\u003cli\u003e1 x GEPRC sticker\u003c\/li\u003e\n\u003cli\u003e1 x heat shrink tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eNote: due to DPS310 supply constraints, GEPRC may ship the DPS368 barometer on D models instead. There is no difference in performance or usage between the two.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"GEP-M1025","offer_id":69480324562978,"sku":"GEP-M1025","price":1999.0,"currency_code":"INR","in_stock":false},{"title":"GEP-M1025Q","offer_id":69480324595746,"sku":"GEP-M1025Q","price":1999.0,"currency_code":"INR","in_stock":false},{"title":"GEP-M1025-DQ","offer_id":46422524952610,"sku":"GEP-M1025-DQ","price":2699.0,"currency_code":"INR","in_stock":true},{"title":"GEP-M1025-MQ","offer_id":69480324628514,"sku":"GEP-M1025-MQ","price":2999.0,"currency_code":"INR","in_stock":true},{"title":"GEP-M1025I","offer_id":69480324661282,"sku":"GEP-M1025I","price":1999.0,"currency_code":"INR","in_stock":false},{"title":"GEP-M1025-DI","offer_id":69480324694050,"sku":"GEP-M1025-DI","price":2899.0,"currency_code":"INR","in_stock":true},{"title":"GEP-M1025-MI","offer_id":69480324726818,"sku":"GEP-M1025-MI","price":1999.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/7-2.jpg?v=1793098811"},{"product_id":"geprc-gep-m10-series-gps-module","title":"GEPRC GEP-M10 Series GPS Module","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEP-M10 series is GEPRC's compact GPS line, built on the u-blox M10050 chip. It supports GPS + BDS + Galileo + QZSS + SBAS joint positioning across up to 32 satellites, with a built-in Flash chip and Farad capacitor that save configuration and give a fast hot start.\u003c\/p\u003e\n\u003cp\u003eThe series comes in six models: the tiny \u003cstrong\u003eGEP-M10nano\u003c\/strong\u003e (12x12mm antenna, 15x15mm board) for micro builds, and the standard \u003cstrong\u003eGEP-M10\u003c\/strong\u003e size (18x18mm antenna, 22x22mm board) available GPS-only or with an optional \u003cstrong\u003eQMC5883L\u003c\/strong\u003e or \u003cstrong\u003eIST8310\u003c\/strong\u003e magnetometer and \u003cstrong\u003eDPS310\u003c\/strong\u003e barometer. Suitable for most FPV quadcopters, multirotors and fixed-wing models.\u003c\/p\u003e\n\u003ch3\u003eChoose your model\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eMagnetometer (compass)\u003c\/th\u003e\n\u003cth\u003eBarometer\u003c\/th\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M10nano\u003c\/td\u003e\n\u003ctd\u003e15x15mm, 12mm antenna\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eUART\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M10\u003c\/td\u003e\n\u003ctd\u003e22x22mm, 18mm antenna\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eUART\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M10Q\u003c\/td\u003e\n\u003ctd\u003e22x22mm, 18mm antenna\u003c\/td\u003e\n\u003ctd\u003eQMC5883L\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eUART + I2C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M10-DQ\u003c\/td\u003e\n\u003ctd\u003e22x22mm, 18mm antenna\u003c\/td\u003e\n\u003ctd\u003eQMC5883L\u003c\/td\u003e\n\u003ctd\u003eDPS310\u003c\/td\u003e\n\u003ctd\u003eUART + I2C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M10I\u003c\/td\u003e\n\u003ctd\u003e22x22mm, 18mm antenna\u003c\/td\u003e\n\u003ctd\u003eIST8310\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eUART + I2C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M10-DI\u003c\/td\u003e\n\u003ctd\u003e22x22mm, 18mm antenna\u003c\/td\u003e\n\u003ctd\u003eIST8310\u003c\/td\u003e\n\u003ctd\u003eDPS310\u003c\/td\u003e\n\u003ctd\u003eUART + I2C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eQ = QMC5883L compass, I = IST8310 compass, D = DPS310 baro. Need a bigger 25mm antenna? See the \u003ca href=\"\/products\/geprc-gep-m1025-series-gps-module\"\u003eGEP-M1025 Series\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eu-blox M10050 chip\u003c\/li\u003e\n\u003cli\u003eGPS + BDS + Galileo + QZSS + SBAS joint positioning\u003c\/li\u003e\n\u003cli\u003eFast positioning, up to 32 satellites\u003c\/li\u003e\n\u003cli\u003eStable connection quality\u003c\/li\u003e\n\u003cli\u003e12x12mm or 18x18mm ceramic antenna\u003c\/li\u003e\n\u003cli\u003eBuilt-in Flash chip and Farad capacitor for quick hot start\u003c\/li\u003e\n\u003cli\u003eOnboard indicator light\u003c\/li\u003e\n\u003cli\u003eOptional integrated magnetometer + barometer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPS chip:\u003c\/strong\u003e u-blox M10050\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage:\u003c\/strong\u003e 3.3V – 5V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceiving frequency:\u003c\/strong\u003e GPS L1, GLONASS L1, BDS B1, Galileo E1, SBAS L1, QZSS L1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels:\u003c\/strong\u003e 72\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellites:\u003c\/strong\u003e up to 32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput protocol:\u003c\/strong\u003e UART (u-blox); I2C for compass\/baro models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBaud rate:\u003c\/strong\u003e 115200 bps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpdate rate:\u003c\/strong\u003e 10Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed accuracy:\u003c\/strong\u003e 0.05 m\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorizontal accuracy:\u003c\/strong\u003e 2D 1.5m (open sky)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTiming accuracy:\u003c\/strong\u003e 30 ns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e tracking -162dBm, acquisition -160dBm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLimits:\u003c\/strong\u003e max height 50,000m, max speed 500m\/s, max acceleration 4G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 15 x 15 x 7.5mm (M10nano), 22 x 22 x 8.2mm (all others)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna:\u003c\/strong\u003e 12 x 12mm (M10nano), 18 x 18mm (all others)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.1g (M10nano), 7.8g (M10)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWiring \u0026amp; setup\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPS:\u003c\/strong\u003e TX\/RX to a free UART on the flight controller (TX to RX, RX to TX), plus 5V and GND. M10nano and M10 use 4 wires.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompass \/ baro models (Q, DQ, I, DI):\u003c\/strong\u003e also connect SDA\/SCL to the FC's I2C pads. Without I2C the GPS still works for GPS Rescue \/ RTH, just without compass and baro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e Betaflight 4.3 or newer (older versions don't support M10), INAV and ArduPilot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eINAV compass alignment:\u003c\/strong\u003e QMC5883 = CW 0° flip, IST8310 = CW 90° flip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e antenna side up, away from the VTX, power leads and motors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFC \/ stacks with I2C: \u003ca href=\"\/products\/speedybee-f405-v5-ox32-55a-stack\"\u003eSpeedyBee F405 V5 Stack\u003c\/a\u003e, \u003ca href=\"\/products\/speedybee-f405-mini-bls-35a-20x20-stack\"\u003eSpeedyBee F405 Mini 20x20 Stack\u003c\/a\u003e, \u003ca href=\"\/products\/matek-h743-slim-v4-flight-controller\"\u003eMatek H743-SLIM V4\u003c\/a\u003e, \u003ca href=\"\/products\/micoair743-v2-am32-stack\"\u003eMicoAir743 V2 Stack\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-f722-bt-8bit-60a-stack\"\u003eGEPRC TAKER F722 60A Stack\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-h743-bt-8bit-80a-stack\"\u003eGEPRC TAKER H743 Stack\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFixed-wing FC: \u003ca href=\"\/products\/speedybee-f405-wing-app-fixed-wing-flight-controller\"\u003eSpeedyBee F405 Wing\u003c\/a\u003e, \u003ca href=\"\/products\/matek-wing-flight-controller-v3\"\u003eMatek Wing V3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eLarger antenna option: \u003ca href=\"\/products\/geprc-gep-m1025-series-gps-module\"\u003eGEPRC GEP-M1025 Series GPS\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x GPS module (model as selected)\u003c\/li\u003e\n\u003cli\u003e1 x terminal wire\u003c\/li\u003e\n\u003cli\u003e1 x instruction manual\u003c\/li\u003e\n\u003cli\u003e1 x GEPRC sticker\u003c\/li\u003e\n\u003cli\u003e1 x heat shrink tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eNote: due to DPS310 supply constraints, GEPRC may ship the DPS368 barometer on D models instead. There is no difference in performance or usage between the two.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"GEP-M10","offer_id":69480398716962,"sku":"GEP-M10","price":1999.0,"currency_code":"INR","in_stock":false},{"title":"GEP-M10Q","offer_id":69480398749730,"sku":"GEP-M10Q","price":1999.0,"currency_code":"INR","in_stock":false},{"title":"GEP-M10-DQ","offer_id":46422525313058,"sku":"GEP-M10-DQ","price":2499.0,"currency_code":"INR","in_stock":true},{"title":"GEP-M10-DI","offer_id":69480398815266,"sku":"GEP-M10-DI","price":2599.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1.jpg?v=1793099130"},{"product_id":"tbs-m10-gps-glonass-module","title":"TBS M10 GPS Glonass Module","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe TBS M10 GPS Glonass is Team BlackSheep's standard-size GPS module, built on the u-blox UBX-M10050 chipset. It delivers fast, stable satellite locks for GPS Rescue, Return-to-Home and OSD telemetry on FPV and long-range builds.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302427.jpg\" alt=\"TBS M10 GPS Glonass module view 2\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302429.jpg\" alt=\"TBS M10 GPS Glonass module view 3\"\u003e\u003cp\u003eOnboard flash memory saves your configuration permanently, and high tracking sensitivity of -166dBm keeps the lock solid in challenging environments.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eChipset\u003c\/th\u003e\n\u003ctd\u003eu-blox UBX-M10050\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration storage\u003c\/th\u003e\n\u003ctd\u003eOnboard flash memory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency\u003c\/th\u003e\n\u003ctd\u003eL1 1575.42MHz; L2 1561.10MHz; L3 1602.00MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBaud rate\u003c\/th\u003e\n\u003ctd\u003e4800bps–921600bps, default 115200bps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSensitivity\u003c\/th\u003e\n\u003ctd\u003etracking -166dBm; capture -160dBm; cold start -148dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCold start\u003c\/th\u003e\n\u003ctd\u003eaverage 26 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarm start\u003c\/th\u003e\n\u003ctd\u003eaverage 24 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHot start\u003c\/th\u003e\n\u003ctd\u003eaverage 1 second\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAccuracy\u003c\/th\u003e\n\u003ctd\u003ehorizontal position autonomous \u0026lt;2m average; SBAS \u0026lt;2.0m average; timepulse RMS 30ns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum height\u003c\/th\u003e\n\u003ctd\u003e50,000m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum speed\u003c\/th\u003e\n\u003ctd\u003e500 m\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum acceleration\u003c\/th\u003e\n\u003ctd\u003e≤4G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRefresh rate\u003c\/th\u003e\n\u003ctd\u003e0.25Hz–18Hz, default 1Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e18 x 18 x 8.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e8.5g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPS only - no compass.\u003c\/strong\u003e Fine for Betaflight GPS Rescue and OSD; for INAV \/ ArduPilot navigation modes that need heading, pick a module with a compass such as the \u003ca href=\"\/products\/tbs-m10q-gps-glonass-module\"\u003eTBS M10Q\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e TX\/RX to a free FC UART (crossed), 5V and GND.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e Betaflight 4.3 or newer, INAV, ArduPilot. Default refresh is 1Hz - the flight controller normally reconfigures it on boot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 18 x 18mm, 8.5g - fits 3.5-5\" builds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFC \/ stacks: \u003ca href=\"\/products\/speedybee-f405-v5-55a-stack-standard\"\u003eSpeedyBee F405 V5\u003c\/a\u003e, \u003ca href=\"\/products\/speedybee-f405-mini-bls-35a-20x20-stack\"\u003eSpeedyBee F405 Mini\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-f722-bt-32bit-50a-stack\"\u003eGEPRC TAKER F722 BT\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eReceiver: \u003ca href=\"\/products\/radiomaster-rp4td-m-expresslrs-mini-true-diversity-receiver\"\u003eRadioMaster RP4TD-M\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default Title","offer_id":46422525444130,"sku":"TBS-M10-GPS","price":1699.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302428.jpg?v=1786841166"},{"product_id":"tbs-m10q-gps-glonass-module","title":"TBS M10Q GPS Glonass Module","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe TBS M10Q GPS Glonass is Team BlackSheep's 25x25mm GPS module with an integrated \u003cstrong\u003eQMC5883P magnetometer\u003c\/strong\u003e, built on the u-blox UBX-M10050 chipset. The onboard compass provides drift-free heading data, essential for reliable Return-to-Home, GPS Rescue and accurate waypoint navigation in INAV and Betaflight.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302476.jpg\" alt=\"TBS M10Q GPS Glonass module view 2\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302477.jpg\" alt=\"TBS M10Q GPS Glonass module view 3\"\u003e\u003cp\u003eOnboard flash memory saves your configuration permanently, and high tracking sensitivity of -166dBm keeps the lock solid in challenging environments.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eChipset\u003c\/th\u003e\n\u003ctd\u003eu-blox UBX-M10050\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMagnetometer\u003c\/th\u003e\n\u003ctd\u003eQMC5883P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration storage\u003c\/th\u003e\n\u003ctd\u003eOnboard flash memory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency\u003c\/th\u003e\n\u003ctd\u003eL1 1575.42MHz; L2 1561.10MHz; L3 1602.00MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBaud rate\u003c\/th\u003e\n\u003ctd\u003e4800bps–921600bps, default 115200bps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSensitivity\u003c\/th\u003e\n\u003ctd\u003etracking -166dBm; capture -160dBm; cold start -148dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCold start\u003c\/th\u003e\n\u003ctd\u003eaverage 26 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarm start\u003c\/th\u003e\n\u003ctd\u003eaverage 24 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHot start\u003c\/th\u003e\n\u003ctd\u003eaverage 1 second\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAccuracy\u003c\/th\u003e\n\u003ctd\u003ehorizontal position autonomous \u0026lt;2m average; SBAS \u0026lt;2.0m average; timepulse RMS 30ns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum height\u003c\/th\u003e\n\u003ctd\u003e50,000m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum speed\u003c\/th\u003e\n\u003ctd\u003e500 m\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum acceleration\u003c\/th\u003e\n\u003ctd\u003e≤4G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRefresh rate\u003c\/th\u003e\n\u003ctd\u003e0.25Hz–18Hz, default 1Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e25 x 25 x 7.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e13.5g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompass is a QMC5883P\u003c\/strong\u003e (not the older QMC5883L). It needs flight-controller firmware recent enough to include the QMC5883P driver - on older firmware the compass won't be detected, though GPS still works. Check your firmware version before buying.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e TX\/RX to a free FC UART (crossed), 5V and GND; compass on the FC's I2C pads (SDA\/SCL).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 25 x 25mm, 13.5g - 5\"+, 7\" long-range and fixed-wing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFC \/ stacks with I2C: \u003ca href=\"\/products\/speedybee-f405-v5-55a-stack-standard\"\u003eSpeedyBee F405 V5\u003c\/a\u003e, \u003ca href=\"\/products\/matek-h743-slim-v4-flight-controller\"\u003eMatek H743-SLIM V4\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-h743-bt-8bit-80a-stack\"\u003eGEPRC TAKER H743\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFixed-wing FC: \u003ca href=\"\/products\/tbs-lucid-h7-wing-fc\"\u003eTBS Lucid H7 Wing\u003c\/a\u003e, \u003ca href=\"\/products\/speedybee-f405-wing-app-fixed-wing-flight-controller\"\u003eSpeedyBee F405 Wing\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default Title","offer_id":46423415226402,"sku":"TBS-M10Q-GPS","price":1999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/A7302475.jpg?v=1786872830"},{"product_id":"tbs-m10n-nano-gps-glonass-module","title":"TBS M10N Nano GPS Glonass Module","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe TBS M10N GPS Glonass is Team BlackSheep's nano GPS module, engineered for micro and lightweight FPV builds. At just 3g and 16.5 x 12.3 x 6.0mm it delivers reliable positioning for Return-to-Home and OSD telemetry without the bulk of a full-size unit.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/TBS_20M10N_1.jpg\" alt=\"TBS M10N nano GPS Glonass module view 2\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/tbs-m10n-mini-gps-09d75f_l.jpg\" alt=\"TBS M10N GPS\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/tbs-m10n-mini-gps-7386dc_l.jpg\" alt=\"TBS M10N GPS module\"\u003e\u003cp\u003eBuilt on the u-blox M10050 chipset, it locks onto GPS, BDS, Galileo, QZSS and SBAS simultaneously with -166dBm tracking sensitivity and 2.0m CEP accuracy. Flash memory retains configuration after power loss.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eChip\u003c\/th\u003e\n\u003ctd\u003eu-blox M10050\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReceiver type\u003c\/th\u003e\n\u003ctd\u003eGPS L1 C\/A, QZSS L1 C\/A\/S, BDS B1I\/B1C, Galileo E1B\/C, SBAS L1 C\/A (WAAS, EGNOS, MSAS, GAGAN)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDefault position system\u003c\/th\u003e\n\u003ctd\u003eGPS, BDS, Galileo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAugmentation\u003c\/th\u003e\n\u003ctd\u003eSBAS, QZSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSensitivity\u003c\/th\u003e\n\u003ctd\u003etracking \u0026amp; navigation -166dBm; reacquisition -160dBm; cold start -148dBm; hot start -160dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAccuracy\u003c\/th\u003e\n\u003ctd\u003ehorizontal 2.0m CEP; velocity 0.05 m\/s; dynamic heading 0.3°; time pulse RMS 30ns, 99% within 60ns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcquisition\u003c\/th\u003e\n\u003ctd\u003ecold start 27s; hot start 1s; aided start 1s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eData output\u003c\/th\u003e\n\u003ctd\u003e4800–921600bps (default 115200bps), TTL; NMEA and UBX (PVT); NMEA RMC, VTG, GGA, GSA, GSV, GLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUpdate rate\u003c\/th\u003e\n\u003ctd\u003e0.25Hz–18Hz (default 10Hz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration storage\u003c\/th\u003e\n\u003ctd\u003eFlash memory retains configuration after power loss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperational limits\u003c\/th\u003e\n\u003ctd\u003ealtitude 80,000m; velocity 500 m\/s; dynamics \u0026lt;4g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e3.6V–5.5V (typical 5.0V), 15mA @ 5.0V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e16.5 x 12.3 x 6.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003e1.00mm 4-pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTemperature\u003c\/th\u003e\n\u003ctd\u003eoperating -40°C to +85°C; storage -40°C to +105°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePPS LED\u003c\/th\u003e\n\u003ctd\u003eoff with no fix, flashes blue after 3D positioning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPS only - no compass.\u003c\/strong\u003e Ideal for Betaflight GPS Rescue on micro builds; INAV navigation modes need a compass module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e 4 wires - TX\/RX to a free FC UART (crossed), 5V and GND. Needs 3.6V or more, so use a 5V pad, not 3.3V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3g, 16.5 x 12.3mm - fits 2.5-3.5\" cinewhoops and toothpicks with 25.5mm AIOs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAIOs: \u003ca href=\"\/products\/geprc-taker-f722-45a-32bit-aio\"\u003eGEPRC TAKER F722 45A AIO\u003c\/a\u003e, \u003ca href=\"\/products\/micoair743-v2-aio-45a-am32-h743-fc-esc-all-in-one\"\u003eMicoAir743 V2 AIO\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrames: \u003ca href=\"\/products\/geprc-gep-cl35-v3-frame\"\u003eGEPRC CL35 V3\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-gep-cl30-v3-frame\"\u003eGEPRC CL30 V3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"TBS","offers":[{"title":"Default Title","offer_id":46423418077218,"sku":"TBS-M10N-GPS","price":1699.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/TBS_20M10N_0.jpg?v=1786872851"},{"product_id":"micoair-m10g-5883-gnss-gps-compass-module","title":"MicoAir M10G-5883 GNSS GPS \u0026 Compass Module","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe MicoAir M10G-5883 GNSS module integrates the u-blox 10th-generation M10050 receiver chip with a QMC5883L magnetic sensor. It supports all L1 GNSS signals (GPS, GLONASS, Galileo, BeiDou) and can use up to 32 satellites simultaneously for navigation.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/MicoAir_GPS_Size-jpg.webp\" alt=\"MicoAir GPS module size comparison\"\u003e\u003cp\u003eA high-gain 18 x 18 x 4mm patch antenna balances performance against a compact 20x20mm footprint, and onboard flash retains parameters when the module loses power. Works with ArduPilot, PX4 and Betaflight\/INAV.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eGNSS receiver\u003c\/th\u003e\n\u003ctd\u003eu-blox M10050\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompass\u003c\/th\u003e\n\u003ctd\u003eQMC5883L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSatellite support\u003c\/th\u003e\n\u003ctd\u003eGPS L1 C\/A; GLONASS L10F; BeiDou B1L\/B1C; Galileo E1B\/C; QZSS L1 C\/A\/S; SBAS L1 C\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConcurrent constellations\u003c\/th\u003e\n\u003ctd\u003e3 (GPS\/BeiDou\/Galileo default, or GPS\/GLONASS\/Galileo). With BeiDou B1L off, 4 systems can run concurrently: GPS + BeiDou(B1C) + GLONASS + Galileo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax navigation rate\u003c\/th\u003e\n\u003ctd\u003e5Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax satellite count\u003c\/th\u003e\n\u003ctd\u003e32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTracking sensitivity\u003c\/th\u003e\n\u003ctd\u003e-167dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlash\u003c\/th\u003e\n\u003ctd\u003eonboard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAntenna\u003c\/th\u003e\n\u003ctd\u003e18 x 18 x 4mm high-gain patch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e20 x 20 x 8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e7g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e TX\/RX to a free FC UART (crossed), 5V and GND; compass on the FC's I2C pads (SDA\/SCL).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e ArduPilot, PX4, INAV and Betaflight 4.3 or newer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpdate rate is 5Hz max\u003c\/strong\u003e - fine for GPS Rescue and RTH. For faster navigation updates choose the 10Hz \u003ca href=\"\/products\/micoair-mg-a01-gnss-gps-compass-module\"\u003eMG-A01\u003c\/a\u003e or 25Hz \u003ca href=\"\/products\/micoair-mg-902-gnss-module\"\u003eMG-902\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 20 x 20mm, 7g - 3.5-5\" builds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMicoAir FCs: \u003ca href=\"\/products\/micoair405-v2-50a-bluejay-stack-f405-fc-esc\"\u003eMicoAir405 V2 Stack\u003c\/a\u003e, \u003ca href=\"\/products\/micoair743-v2-am32-stack-h743-fc-esc\"\u003eMicoAir743 V2 Stack\u003c\/a\u003e, \u003ca href=\"\/products\/micoair743-v2-aio-45a-am32-h743-fc-esc-all-in-one\"\u003eMicoAir743 V2 AIO 45A\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSetup note: set the magnetometer to \"QMC5883\" and MAG alignment to \"CW 0° flip\", then calibrate the compass. Keep the GPS module away from power output cables to avoid interference.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"MicoAir","offers":[{"title":"Default Title","offer_id":46423422107682,"sku":"M10G-5883","price":1589.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/MicoAir_GPS-jpg.webp?v=1786872892"},{"product_id":"micoair-mg-a01-gnss-gps-compass-module","title":"MicoAir MG-A01 GNSS GPS \u0026 Compass Module","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe MicoAir MG-A01 is a 25x25mm standard-size GNSS module built on the u-blox 10th-generation M10050 receiver chip with an integrated QMC5883L compass. It supports all L1 GNSS signals (GPS, GLONASS, Galileo, BeiDou) and can use up to 32 satellites simultaneously.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/MicoAir_GPS_Size-jpg_8e4b5de3-694d-42cc-aece-e20a928bd4f7.webp\" alt=\"MicoAir GPS module size comparison\"\u003e\u003cp\u003eThe larger 25mm footprint gives improved reception over the compact M10G-5883, and a higher 10Hz maximum navigation rate. Onboard flash retains parameters when the module loses power. Suited to FPV, racing drones, robotics and boats, and compatible with ArduPilot, PX4 and Betaflight\/INAV.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eGNSS receiver\u003c\/th\u003e\n\u003ctd\u003eu-blox M10050\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompass\u003c\/th\u003e\n\u003ctd\u003eQMC5883L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSatellite support\u003c\/th\u003e\n\u003ctd\u003eGPS L1 C\/A; GLONASS L10F; BeiDou B1L\/B1C; Galileo E1B\/C; QZSS L1 C\/A\/S; SBAS L1 C\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConcurrent constellations\u003c\/th\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax navigation rate\u003c\/th\u003e\n\u003ctd\u003e10Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax satellite count\u003c\/th\u003e\n\u003ctd\u003e32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTracking sensitivity\u003c\/th\u003e\n\u003ctd\u003e-167dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlash\u003c\/th\u003e\n\u003ctd\u003eonboard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e25 x 25 x 8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e12g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e TX\/RX to a free FC UART (crossed), 5V and GND; compass on the FC's I2C pads (SCL\/SDA).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e ArduPilot, PX4, INAV and Betaflight 4.3 or newer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 25 x 25mm, 12g - 5\"+, 7\" long-range, fixed-wing, rovers and boats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFCs: \u003ca href=\"\/products\/micoair743-v2-am32-stack-h743-fc-esc\"\u003eMicoAir743 V2 Stack\u003c\/a\u003e, \u003ca href=\"\/products\/matek-h743-slim-v4-flight-controller\"\u003eMatek H743-SLIM V4\u003c\/a\u003e, \u003ca href=\"\/products\/speedybee-f405-v5-55a-stack-standard\"\u003eSpeedyBee F405 V5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFixed-wing FC: \u003ca href=\"\/products\/speedybee-f405-wing-app-fixed-wing-flight-controller\"\u003eSpeedyBee F405 Wing\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSetup note: connect SCL and SDA correctly to the flight controller. On ArduPilot, \"QMC5883L\" appearing on the Mission Planner SETUP \u0026gt; Compass page confirms the compass has been recognised. Keep the GPS module away from power output cables to avoid interference.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"MicoAir","offers":[{"title":"Default Title","offer_id":46423423352866,"sku":"MG-A01","price":1599.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/MicoAir_GPS-jpg_847bfb27-f4df-44a8-b66f-1a6def6efd55.webp?v=1786872905"},{"product_id":"micoair-mg-f10-l1-l5-dual-band-gnss-module","title":"MicoAir MG-F10 L1+L5 Dual-Band GNSS Module","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe MicoAir MG-F10 is an L1+L5 dual-band GNSS module built on the u-blox NEO-F10N receiver with an IST8310 compass, supplied with a high-gain helix antenna on an SMA connector. Dual-band reception gives roughly 1 m CEP accuracy without RTK - the highest-performing MicoAir module short of RTK.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/MG-F10_1-jpg.webp\" alt=\"MicoAir MG-F10 GNSS module view 2\"\u003e\u003cp\u003eThe L5 band is far more resistant to multipath interference than L1 alone, which makes the MG-F10 a strong choice near buildings, in urban areas, or anywhere reflected signals degrade a conventional single-band module. The helix antenna and 38 dB LNA speed up satellite acquisition, and up to four constellations are tracked at once with updates at up to 10 Hz. A blue LED shows power (solid) and 3D fix (blinking).\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eu-blox NEO-F10N, L1 (1575.42 MHz) + L5 (1176.45 MHz) dual-band\u003c\/li\u003e\n\u003cli\u003eGPS\/QZSS L1C\/A + L5, Galileo E1-B\/C + E5a, BeiDou B1C + B2a, NavIC SPS-L5\u003c\/li\u003e\n\u003cli\u003e4 concurrent constellations, up to 10 Hz, ~1 m CEP\u003c\/li\u003e\n\u003cli\u003eIST8310 compass\u003c\/li\u003e\n\u003cli\u003eHelix antenna on SMA with 38 dB LNA\u003c\/li\u003e\n\u003cli\u003eCompact bare board - 6 g without the antenna\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/MG-F10_2-jpg.webp\" alt=\"MicoAir MG-F10 GNSS module view 3\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage:\u003c\/strong\u003e 5V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPS interface:\u003c\/strong\u003e UART (3.3V LVTTL), 115200 baud, UBX-PVT protocol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompass interface:\u003c\/strong\u003e I2C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e SH1.0 6-pin (power, UART, I2C); antenna SMA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoard size:\u003c\/strong\u003e 22 x 34 x 13.4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6 g board, 21 g with antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e ArduPilot 4.4.0+, PX4 1.14.0+\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/MG-F10_size-jpg.webp\" alt=\"MicoAir MG-F10 dimensions\"\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest on ArduPilot \/ PX4\u003c\/strong\u003e - mapping, survey and autonomous missions near buildings. Includes NavIC (India's own constellation).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e GPS on a free FC UART, compass on the FC's I2C pads (SDA\/SCL), 5V and GND.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMG-F10 vs MG-F10-C:\u003c\/strong\u003e same receiver, compass, antenna and accuracy. The MG-F10 is the bare board - smallest and lightest, for builds where you will mount or shroud it yourself. The \u003ca href=\"\/products\/micoair-mg-f10-c-l1-l5-dual-band-gnss-module\"\u003eMG-F10-C\u003c\/a\u003e adds a protective case, GH1.25 connectors and a separate PPS output.\u003c\/li\u003e\n\u003cli\u003eOverkill for Betaflight GPS Rescue - a standard M10 module does that job.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eArduPilot FCs: \u003ca href=\"\/products\/micoair743-v2-am32-stack-h743-fc-esc\"\u003eMicoAir743 V2 Stack\u003c\/a\u003e, \u003ca href=\"\/products\/matek-h743-slim-v4-flight-controller\"\u003eMatek H743-SLIM V4\u003c\/a\u003e, \u003ca href=\"\/products\/sequre-h743-v2-icm42688p-fc-4-8s-dual-bec\"\u003eSEQURE H743 V2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x MG-F10 GPS module\u003c\/li\u003e\n\u003cli\u003e1x Helix antenna\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"MicoAir","offers":[{"title":"Default Title","offer_id":46423424696354,"sku":"MG-F10","price":7799.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/MG-F10-jpg.webp?v=1786872922"},{"product_id":"hglrc-m100-5883-gps-module","title":"HGLRC M100-5883 GPS Module with QMC5883L Compass","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe HGLRC M100-5883 is a compact GPS module built on the 10th-generation u-blox M10 chip with an integrated QMC5883L compass. A ceramic antenna and 72 receive channels give fast positioning with a stable signal, at a 10Hz output rate. Well suited to FPV quadcopters and fixed-wing UAVs.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/M100_MINI_ef411996-3cf0-4dc0-a847-6a9f670d1da6.jpg\" alt=\"HGLRC M100-5883 GPS module - specifications\"\u003e\u003ch3\u003eTechnical parameters\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eChip\u003c\/th\u003e\n\u003ctd\u003eM10 (10th generation)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAntenna\u003c\/th\u003e\n\u003ctd\u003eceramic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency\u003c\/th\u003e\n\u003ctd\u003eGPS\/QZSS L1C\/A; SBAS EGNOS, GAGAN, MSAS and WAAS; GLONASS L1OF; BDS B1I; Galileo E1B\/C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReceive channels\u003c\/th\u003e\n\u003ctd\u003e72\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBaud rate\u003c\/th\u003e\n\u003ctd\u003e115200bps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput protocol\u003c\/th\u003e\n\u003ctd\u003eUBLOX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput frequency\u003c\/th\u003e\n\u003ctd\u003e10Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower input\u003c\/th\u003e\n\u003ctd\u003e3.3–5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSensitivity\u003c\/th\u003e\n\u003ctd\u003etracking and navigation -166dBm; reacquisition -160dBm; cold start -148dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFirst fix\u003c\/th\u003e\n\u003ctd\u003ecold start 29s, hot start 1s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpeed accuracy\u003c\/th\u003e\n\u003ctd\u003e0.05 m\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTime pulse accuracy\u003c\/th\u003e\n\u003ctd\u003eRMS 30ns, 99% within 60ns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating limits\u003c\/th\u003e\n\u003ctd\u003e≤4g, altitude 80,000m, speed 500 m\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e21 x 21 x 8.02mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e7.73g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e TX\/RX to a free FC UART (crossed), 5V and GND; compass on the FC's I2C pads (SDA\/SCL).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e Betaflight 4.3 or newer (required for M10 chips), INAV, ArduPilot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 21 x 21mm, 7.7g - 3.5-5\" builds and small fixed-wing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFC \/ stacks: \u003ca href=\"\/products\/speedybee-f405-v5-55a-stack-standard\"\u003eSpeedyBee F405 V5\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-f722-bt-32bit-50a-stack\"\u003eGEPRC TAKER F722 BT\u003c\/a\u003e, \u003ca href=\"\/products\/foxeer-f722-v4-fc-icm42688-dps310\"\u003eFoxeer F722 V4\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eUpgrade: \u003ca href=\"\/products\/hglrc-m100-pro-gps-module\"\u003eHGLRC M100 PRO (120ch)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eNotes: use Betaflight 4.3.0 firmware or above — older versions do not recognise the 10th-generation chip. Install with the antenna facing up and away from motors, power lines and other sources of interference. Default constellation set is GPS+Galileo+QZSS+SBAS; BDS cannot be enabled simultaneously.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HGLRC","offers":[{"title":"Default Title","offer_id":46423427711010,"sku":"M100-5883","price":1699.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/834994060f2aefdcc6daa45fab9381cc_1200x1200_99ea153e-85b9-4bbe-aaf8-381dcf9af92e.jpg?v=1786872947"},{"product_id":"hglrc-m100-pro-gps-module","title":"HGLRC M100 PRO GPS Module","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe HGLRC M100 PRO is the upgraded version of the M100 series, using a 10th-generation chip with the receiving channel count expanded to 120ch. That lets it find satellites faster and hold 50+ in view, with five-mode positioning for a strong, stable signal. A QMC5883L compass provides accurate heading.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/HGLRC-M100-PRO-GPS_b6d2dfe8-c3f2-4cde-83d0-f493181ed409.jpg\" alt=\"HGLRC M100 PRO GPS module detail\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003e10th-generation chip, 50+ satellite searches\u003c\/li\u003e\n\u003cli\u003eQMC5883L compass for more accurate pointing\u003c\/li\u003e\n\u003cli\u003e120 receiving channels — faster and broader satellite acquisition\u003c\/li\u003e\n\u003cli\u003eFive-mode positioning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct parameters\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eChip\u003c\/th\u003e\n\u003ctd\u003eB101 (10th generation)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReceiving channels\u003c\/th\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBaud rate\u003c\/th\u003e\n\u003ctd\u003e115200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtocol\u003c\/th\u003e\n\u003ctd\u003eUBX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAntenna\u003c\/th\u003e\n\u003ctd\u003eceramic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput frequency\u003c\/th\u003e\n\u003ctd\u003e10Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency\u003c\/th\u003e\n\u003ctd\u003eGPS L1, GLONASS G1, BDS B1, GALILEO E1, QZSS L1, SBAS L1, IRNSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower input\u003c\/th\u003e\n\u003ctd\u003e3.6–5.5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcceleration\u003c\/th\u003e\n\u003ctd\u003e4G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpeed\u003c\/th\u003e\n\u003ctd\u003e500 m\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e21.2 x 21.2 x 8.2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e7.9g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e-40°C to +85°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e-40°C to +105°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e SH1.0 6-pin cable included - plugs into FCs with a 6-pin GPS port, or solder to UART (TX\/RX) and I2C (SDA\/SCL) pads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip:\u003c\/strong\u003e not a u-blox M10 - it speaks the UBX protocol and works with Betaflight, INAV and ArduPilot set to UBLOX. Includes IRNSS \/ NavIC (India's constellation).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 3.6-5.5V - use a 5V pad, not 3.3V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 21 x 21mm, 7.9g - 3.5-5\" builds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFC \/ stacks: \u003ca href=\"\/products\/speedybee-f405-v5-55a-stack-standard\"\u003eSpeedyBee F405 V5\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-f722-bt-32bit-50a-stack\"\u003eGEPRC TAKER F722 BT\u003c\/a\u003e, \u003ca href=\"\/products\/axisflying-argus-eco-f405-stack-60a-4-6s\"\u003eAxisflying Argus ECO F405\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x HGLRC M100 PRO GPS\u003c\/li\u003e\n\u003cli\u003e1 x heat shrink tube (φ18mm x 25mm)\u003c\/li\u003e\n\u003cli\u003e1 x HGLRC sticker\u003c\/li\u003e\n\u003cli\u003e1 x HGLRC manual\u003c\/li\u003e\n\u003cli\u003e1 x SH1.0-6pin cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"HGLRC","offers":[{"title":"Default Title","offer_id":46423429709858,"sku":"M100-PRO","price":1899.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/hglrc-m100-pro-gps-950177_1200x1200_5da3f8c7-7279-4174-ab33-22e0a1e557d3.jpg?v=1786872965"},{"product_id":"foxeer-m10q-180-v2-gps-compass-module","title":"Foxeer M10Q 180 V2 GPS \u0026 IST8310 Compass Module","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe Foxeer M10Q 180 V2 is a GPS module with an integrated IST8310 compass, built on the u-blox M10050 chip for faster, more accurate positioning than older M8-chip modules. At 18x18x8mm it strikes a good balance of size and antenna sensitivity, suited to standard 5\" drones and cinewhoops.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/28859-fill-630_630.jpg\" alt=\"Foxeer M10Q 180 V2 GPS module - top view\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/28857-fill-630_630.jpg\" alt=\"Foxeer M10Q 180 V2 GPS module - side view\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/28854-fill-630_630.jpg\" alt=\"Foxeer M10Q 180 V2 GPS module - pinout\"\u003e\u003cp\u003e\u003cem\u003eThis is an original, official Foxeer product supplied in unbranded packaging (no logos) — fully authentic, just plain packaging.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eChip\u003c\/th\u003e\n\u003ctd\u003eu-blox M10050, 72 channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstellations\u003c\/th\u003e\n\u003ctd\u003eGPS L1, GLONASS L1, BDS B1, Galileo E1, SBAS L1, QZSS L1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompass\u003c\/th\u003e\n\u003ctd\u003eIST8310\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBaudrate\u003c\/th\u003e\n\u003ctd\u003e115200bps, protocol UBLOX (NMEA also supported)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput frequency\u003c\/th\u003e\n\u003ctd\u003e10Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpeed accuracy\u003c\/th\u003e\n\u003ctd\u003e0.05m\/s, position accuracy: 2D 1.5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e7.5g, size: 18x18x8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e TX\/RX to a free FC UART (crossed), 5V and GND; IST8310 compass on the FC's I2C pads (SDA\/SCL).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e Betaflight 4.3 or newer, INAV (mag alignment usually CW 90° flip for IST8310), ArduPilot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 18 x 18mm, 7.5g - 3.5-5\" freestyle and cinewhoops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFoxeer FC: \u003ca href=\"\/products\/foxeer-f722-v4-fc-icm42688-dps310\"\u003eFoxeer F722 V4\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eStacks: \u003ca href=\"\/products\/speedybee-f405-v5-55a-stack-standard\"\u003eSpeedyBee F405 V5\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-f722-bt-32bit-50a-stack\"\u003eGEPRC TAKER F722 BT\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Foxeer","offers":[{"title":"Default Title","offer_id":46423432626210,"sku":"MR1866","price":2399.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/28858-576_576.jpg?v=1787854882"},{"product_id":"newbeedrone-beeid-v1-1-m10q-gps-module","title":"NewBeeDrone BeeID v1.1 M10Q GPS Module with Remote ID \u0026 Drone Tracker","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe NewBeeDrone BeeID v1.1 M10Q combines three functions on one lightweight board: a high-performance M10Q GNSS receiver, a Remote ID broadcast transmitter, and a Bluetooth LE drone-tracker beacon.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/NewBeeDrone-BeeID-v1.1-M10Q-GPS-Module-with-RemoteID-_-Drone-Tracker-NewBeeDrone-146774378_1000x_232f4ccf-234e-4fb4-9c5a-e2890baec2e2.jpg\" alt=\"NewBeeDrone BeeID v1.1 M10Q module detail\"\u003e\u003cp\u003eAs a GPS it uses the u-blox M10Q chipset with a high-gain ceramic antenna and 72-channel parallel tracking, giving fast satellite lock for Betaflight GPS Rescue and autonomous navigation. The BLE tracker beacon keeps transmitting after a crash, so you can walk a downed quad down on your phone using apps such as Drone Scanner even after losing video and control link. A built-in barometer supplies altitude for broadcast reporting only — it does not participate in flight control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote on Remote ID:\u003c\/strong\u003e the Remote ID function is certified to \u003cem\u003eFAA\u003c\/em\u003e requirements for aircraft over 250g in US airspace. India has its own separate DGCA regulations, so this module should not be treated as Indian regulatory compliance. The GPS and tracker functions work anywhere.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eHigh-precision u-blox M10Q GPS\u003c\/li\u003e\n\u003cli\u003eBuilt-in BLE drone tracker for recovery\u003c\/li\u003e\n\u003cli\u003eFAA-compliant Remote ID broadcast\u003c\/li\u003e\n\u003cli\u003eLightweight and compact (approx. 5.2g)\u003c\/li\u003e\n\u003cli\u003eCeramic GPS antenna\u003c\/li\u003e\n\u003cli\u003eWiFi setup via phone or PC\u003c\/li\u003e\n\u003cli\u003eStandard UART interface\u003c\/li\u003e\n\u003cli\u003eBuilt-in barometer for Remote ID altitude broadcast\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/BeeID-v1_01.jpg\" alt=\"NewBeeDrone BeeID module overview\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/20250421160852.jpg\" alt=\"NewBeeDrone BeeID wiring diagram\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e22 x 15.6 x 8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGPS module\u003c\/th\u003e\n\u003ctd\u003eM10Q\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtocol\u003c\/th\u003e\n\u003ctd\u003eGPS L1, GLONASS L1, GALILEO E1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e5.2g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAntenna\u003c\/th\u003e\n\u003ctd\u003eceramic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReceiving channels\u003c\/th\u003e\n\u003ctd\u003e72\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBitrate\u003c\/th\u003e\n\u003ctd\u003e115200bps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpeed accuracy\u003c\/th\u003e\n\u003ctd\u003e0.05 m\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDynamic characteristics\u003c\/th\u003e\n\u003ctd\u003e50,000m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e-40°C to +85°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnectivity\u003c\/th\u003e\n\u003ctd\u003eWiFi for configuration; BLE for Remote ID broadcast\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e5V input and ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eBetaflight, INAV, ArduPilot, PX4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eSetup\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConnect BeeID TX to FC RX, and BeeID RX to FC TX on the same UART port\u003c\/li\u003e\n\u003cli\u003eConnect 5V power and ground\u003c\/li\u003e\n\u003cli\u003eSet the UART baud rate to 115200bps and enable GPS mode\u003c\/li\u003e\n\u003cli\u003eSave and reboot the flight controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPS only - no compass.\u003c\/strong\u003e Good for GPS Rescue and crash recovery; INAV navigation modes need a separate compass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne UART:\u003c\/strong\u003e GPS, Remote ID and tracker all run over a single FC UART plus 5V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 22 x 15.6mm, 5.2g - fits 3-5\" builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegulatory:\u003c\/strong\u003e Remote ID is to US FAA rules - not a DGCA compliance device in India.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFC \/ stacks: \u003ca href=\"\/products\/speedybee-f405-v5-55a-stack-standard\"\u003eSpeedyBee F405 V5\u003c\/a\u003e, \u003ca href=\"\/products\/speedybee-f405-mini-bls-35a-20x20-stack\"\u003eSpeedyBee F405 Mini\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-f722-45a-32bit-aio\"\u003eGEPRC TAKER F722 AIO\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eImportant for INAV users: disable the AUTO-CONFIG setting for the BeeID module to function correctly. Ensure your flight controller firmware supports the UBLOX GPS protocol.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"NewBeeDrone","offers":[{"title":"Default Title","offer_id":46423438164002,"sku":"00AG11","price":3499.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/NewBeeDrone-BeeID-v1.1-M10Q-GPS-Module-with-RemoteID-_-Drone-Tracker-NewBeeDrone-150475829_800x_6380852f-a53d-4e47-b76e-dceb2d89ae0f.jpg?v=1786873049"},{"product_id":"speedybee-bzgnss-gps-module","title":"SpeedyBee BZGNSS GPS Module","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe SpeedyBee BZGNSS BZ-251 is a 25x25mm GPS module built on the 10th-generation u-blox M10 chip, with a built-in QMC5883 compass. It tracks GPS, GLONASS, BeiDou and Galileo at up to 10Hz, giving fast satellite locks for GPS Rescue and return-to-home on FPV quads, and position hold and navigation on fixed wings running INAV or ArduPilot. An SH1.0 cable is included for plug-and-play use with SpeedyBee flight controllers.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003e10th-generation M10 GNSS chip - multi-constellation for fast, stable locks\u003c\/li\u003e\n\u003cli\u003eBuilt-in QMC5883 compass for heading on INAV and ArduPilot\u003c\/li\u003e\n\u003cli\u003eDual protocol: UBX and NMEA\u003c\/li\u003e\n\u003cli\u003eUp to 10Hz update rate (default 10Hz)\u003c\/li\u003e\n\u003cli\u003eCompact 25x25x8mm, 11.9g\u003c\/li\u003e\n\u003cli\u003eSH1.0 cable included - plugs straight into SpeedyBee FC GPS ports\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eBZGNSS BZ-251\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGNSS chip\u003c\/th\u003e\n\u003ctd\u003eu-blox M10 (10th generation)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstellations\u003c\/th\u003e\n\u003ctd\u003eGPS L1, GLONASS L1, BeiDou B1, Galileo E1, SBAS L1, QZSS L1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChannels\u003c\/th\u003e\n\u003ctd\u003e72\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUpdate rate\u003c\/th\u003e\n\u003ctd\u003e1–10Hz (default 10Hz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHorizontal accuracy\u003c\/th\u003e\n\u003ctd\u003e1.5m (open sky)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpeed accuracy\u003c\/th\u003e\n\u003ctd\u003e0.05m\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompass\u003c\/th\u003e\n\u003ctd\u003eQMC5883\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtocol\u003c\/th\u003e\n\u003ctd\u003eUBX + NMEA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDefault baud rate\u003c\/th\u003e\n\u003ctd\u003e115200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e25 x 25 x 8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e11.9g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eSH1.0 (cable included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e-40°C to +85°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlight controller:\u003c\/strong\u003e any FC with a free UART and 5V pad; compass needs SDA\/SCL (I2C) pads. Plug-and-play on SpeedyBee FCs with a GPS socket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e Betaflight (GPS Rescue), INAV and ArduPilot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e 25x25mm - mount it away from the VTX and power leads for best compass readings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlight controllers: \u003ca href=\"\/products\/speedybee-f405-v5-ox32-55a-stack\"\u003eSpeedyBee F405 V5 OX32 55A Stack\u003c\/a\u003e, \u003ca href=\"\/products\/speedybee-f405-mini-bls-35a-20x20-stack\"\u003eSpeedyBee F405 Mini 35A Stack\u003c\/a\u003e, \u003ca href=\"\/products\/speedybee-f405-wing-app-fixed-wing-flight-controller\"\u003eSpeedyBee F405 WING APP\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAccessory: \u003ca href=\"\/products\/vifly-gps-mate-external-gps-power-module\"\u003eVIFLY GPS-Mate\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x SpeedyBee BZ-251 GPS with QMC5883 compass\u003c\/li\u003e\n\u003cli\u003e1x SH1.0 cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SpeedyBee","offers":[{"title":"BZ-251 with QMC5883 Compass","offer_id":46429645144098,"sku":"AF-SPB-BZ251-GPS","price":1499.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/BZ-251-GPS-with-5883-Compass.webp?v=1793546859"},{"product_id":"micoair-mg-902-gnss-module","title":"MicoAir MG-902 GNSS Module","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe MicoAir MG-902 is a 25 x 25mm GNSS module with a u-blox M9 receiver and QMC5883L compass. Its standout feature is a fast update rate of up to 25Hz, with four concurrent constellations for quick, accurate fixes — a good choice for GPS rescue, navigation and autonomous missions.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/MicoAir_GPS_Size-jpg_9ba25733-dc37-4049-a8c0-4dcabc5a23dc.webp\" alt=\"MicoAir GPS module dimensions\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eu-blox M9 (M9140) receiver, up to 25Hz\u003c\/li\u003e\n\u003cli\u003eGPS, GLONASS, Galileo and BeiDou concurrently\u003c\/li\u003e\n\u003cli\u003eQMC5883L compass\u003c\/li\u003e\n\u003cli\u003e25 x 25 x 4mm patch antenna\u003c\/li\u003e\n\u003cli\u003eBlue status LED: solid on power, blinks on 3D fix\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/26270-1000_1000.jpg\" alt=\"MicoAir MG-902 GNSS module\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eReceiver\u003c\/th\u003e\n\u003ctd\u003eu-blox M9 (M9140)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompass\u003c\/th\u003e\n\u003ctd\u003eQMC5883L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTracking sensitivity\u003c\/th\u003e\n\u003ctd\u003e-167dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax satellites\u003c\/th\u003e\n\u003ctd\u003e32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003e5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eSH1.0 6-pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e25 x 25 x 8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e12g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e SH1.0 6-pin (GPS UART + compass I2C in one plug) - plugs straight into FCs with a matching 6-pin GPS port, such as MicoAir's boards; otherwise solder the included lead to UART and I2C pads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e ArduPilot, PX4, INAV and Betaflight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 25 x 25mm, 12g - 5\"+, 7\" long-range, fixed-wing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFCs: \u003ca href=\"\/products\/micoair743-v2-am32-stack-h743-fc-esc\"\u003eMicoAir743 V2 Stack\u003c\/a\u003e, \u003ca href=\"\/products\/micoair405-v2-50a-bluejay-stack-f405-fc-esc\"\u003eMicoAir405 V2 Stack\u003c\/a\u003e, \u003ca href=\"\/products\/matek-h743-slim-v4-flight-controller\"\u003eMatek H743-SLIM V4\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x MicoAir MG-902 GNSS module\u003c\/li\u003e\n\u003cli\u003e1x connection cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"MicoAir","offers":[{"title":"Default Title","offer_id":68693418934306,"sku":"AF-MCA-MG902-GNSS","price":1999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/26286-1000_1000.jpg?v=1792096503"},{"product_id":"micoair-mg-f10-c-l1-l5-dual-band-gnss-module","title":"MicoAir MG-F10-C L1+L5 Dual-Band GNSS Module","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe MicoAir MG-F10-C is the cased version of the MG-F10: an L1+L5 dual-band GNSS module built on the u-blox NEO-F10N receiver with an IST8310 compass, supplied with a high-gain helix antenna on an SMA connector. Dual-band reception gives roughly 1 m CEP accuracy without RTK, and noticeably better results near buildings and in urban areas than single-band L1 modules.\u003c\/p\u003e\n\u003cp\u003eThe protective case shields the board on exposed mounts, and the helix antenna with 38 dB LNA speeds up satellite acquisition. Up to four constellations are tracked at once, with updates at up to 10 Hz. A blue LED shows power (solid) and 3D fix (blinking).\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eu-blox NEO-F10N, L1 (1575.42 MHz) + L5 (1176.45 MHz) dual-band\u003c\/li\u003e\n\u003cli\u003eGPS\/QZSS L1C\/A + L5, Galileo E1-B\/C + E5a, BeiDou B1C + B2a, NavIC SPS-L5\u003c\/li\u003e\n\u003cli\u003e4 concurrent constellations, up to 10 Hz, ~1 m CEP\u003c\/li\u003e\n\u003cli\u003eIST8310 compass\u003c\/li\u003e\n\u003cli\u003eHelix antenna on SMA with 38 dB LNA\u003c\/li\u003e\n\u003cli\u003eProtective plastic case, GH1.25 connectors, separate PPS output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage:\u003c\/strong\u003e 5V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPS interface:\u003c\/strong\u003e UART (3.3V LVTTL), 115200 baud, UBX-PVT protocol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompass interface:\u003c\/strong\u003e I2C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e GH1.25 (power, UART, I2C) + 4-pin GH1.25 with PPS; antenna SMA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule size:\u003c\/strong\u003e 29 x 44 x 14.7 mm (cased)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna size:\u003c\/strong\u003e 28 x 28 x 59.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13 g module, 28 g with antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e ArduPilot 4.4.0+, PX4 1.14.0+\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest on ArduPilot \/ PX4\u003c\/strong\u003e - mapping, survey and autonomous missions, especially near buildings. Includes NavIC (India's own constellation).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e GPS on a free FC UART, compass on the FC's I2C pads (SDA\/SCL), 5V and GND. Connect PPS only if your setup uses it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMG-F10-C vs MG-F10:\u003c\/strong\u003e same receiver, compass, antenna and accuracy. The MG-F10-C adds the case, GH1.25 connectors and PPS output. For the smallest, lightest bare board (6 g, SH1.0), see the \u003ca href=\"\/products\/micoair-mg-f10-l1-l5-dual-band-gnss-module\"\u003eMicoAir MG-F10\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eOverkill for Betaflight GPS Rescue - a standard M10 module does that job.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eArduPilot FCs: \u003ca href=\"\/products\/micoair743-v2-am32-stack-h743-fc-esc\"\u003eMicoAir743 V2 Stack\u003c\/a\u003e, \u003ca href=\"\/products\/matek-h743-slim-v4-flight-controller\"\u003eMatek H743-SLIM V4\u003c\/a\u003e, \u003ca href=\"\/products\/sequre-h743-v2-icm42688p-fc-4-8s-dual-bec\"\u003eSEQURE H743 V2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x MG-F10-C GPS module with case\u003c\/li\u003e\n\u003cli\u003e1x Helix antenna\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"MicoAir","offers":[{"title":"Default Title","offer_id":69481180135458,"sku":"MG-F10-C","price":7899.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/MG-F10-C-1.webp?v=1793102787"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/collections\/AeroFlow-Category-gps.png?v=1787157828","url":"https:\/\/aeroflow.in\/collections\/gps.oembed","provider":"AeroFlow","version":"1.0","type":"link"}