{"title":"GEPRC","description":"\u003cp\u003eGEPRC makes complete FPV drones and the parts behind them: frames, motors, flight stacks, video transmitters, GPS modules and antennas, covering cinewhoops, 5-inch freestyle and 7-inch long range.\u003c\/p\u003e\u003cp\u003eFrom GEPRC we stock MARK5, Cinelog30 V3 and T-Cube18 ready-built quads; MK5, Vapor X5, D5 and D6, CL30 and CL35 V3, CT35, MOZ7 V2 and Mark4-7 frames; SPEEDX2 and EM series motors; TAKER stacks, AIOs and ESCs; MATEN 5.8G and 3.3G VTX and VRX; GEP-M10 and M1025 GPS modules; Momoda2, Triple Feed Patch and SOMA antennas; and the ELRS Gemini Xrossband receiver.\u003c\/p\u003e","products":[{"product_id":"geprc-gep-m1025-series-gps-module","title":"GEPRC GEP-M1025 Series GPS Module","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEP-M1025 series is GEPRC's upgraded GPS line, built on the u-blox M10050 chip with a large 25x25mm ceramic antenna for stronger signal reception. It supports GPS + BDS + Galileo + QZSS + SBAS joint positioning across up to 32 satellites, with a built-in Flash chip and Farad capacitor that save configuration and give a fast hot start.\u003c\/p\u003e\n\u003cp\u003eThe series comes in seven models: a GPS-only version, or GPS with an optional \u003cstrong\u003eQMC5883L\u003c\/strong\u003e or \u003cstrong\u003eIST8310\u003c\/strong\u003e magnetometer and an optional \u003cstrong\u003eDPS310\u003c\/strong\u003e or \u003cstrong\u003eMS5611\u003c\/strong\u003e barometer. Pick the model that matches your flight controller and flight modes — suitable for most FPV quadcopters, multirotors and fixed-wing models.\u003c\/p\u003e\n\u003ch3\u003eChoose your model\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eMagnetometer (compass)\u003c\/th\u003e\n\u003cth\u003eBarometer\u003c\/th\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M1025\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eUART\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M1025Q\u003c\/td\u003e\n\u003ctd\u003eQMC5883L\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eUART + I2C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M1025-DQ\u003c\/td\u003e\n\u003ctd\u003eQMC5883L\u003c\/td\u003e\n\u003ctd\u003eDPS310\u003c\/td\u003e\n\u003ctd\u003eUART + I2C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M1025-MQ\u003c\/td\u003e\n\u003ctd\u003eQMC5883L\u003c\/td\u003e\n\u003ctd\u003eMS5611\u003c\/td\u003e\n\u003ctd\u003eUART + I2C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M1025I\u003c\/td\u003e\n\u003ctd\u003eIST8310\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eUART + I2C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M1025-DI\u003c\/td\u003e\n\u003ctd\u003eIST8310\u003c\/td\u003e\n\u003ctd\u003eDPS310\u003c\/td\u003e\n\u003ctd\u003eUART + I2C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M1025-MI\u003c\/td\u003e\n\u003ctd\u003eIST8310\u003c\/td\u003e\n\u003ctd\u003eMS5611\u003c\/td\u003e\n\u003ctd\u003eUART + I2C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eQ = QMC5883L compass, I = IST8310 compass, D = DPS310 baro, M = MS5611 baro.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eu-blox M10 series chip (M10050)\u003c\/li\u003e\n\u003cli\u003eGPS + BDS + Galileo + QZSS + SBAS joint positioning\u003c\/li\u003e\n\u003cli\u003eFast positioning, up to 32 satellites\u003c\/li\u003e\n\u003cli\u003eStable connection quality\u003c\/li\u003e\n\u003cli\u003e25x25mm ceramic antenna for better signal reception\u003c\/li\u003e\n\u003cli\u003eBuilt-in Flash chip and Farad capacitor for quick hot start\u003c\/li\u003e\n\u003cli\u003eOnboard indicator light\u003c\/li\u003e\n\u003cli\u003eOptional integrated magnetometer + barometer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPS chip:\u003c\/strong\u003e u-blox M10050\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage:\u003c\/strong\u003e 3.3V – 5V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceiving frequency:\u003c\/strong\u003e GPS L1, GLONASS L1, BDS B1, Galileo E1, SBAS L1, QZSS L1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels:\u003c\/strong\u003e 72\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellites:\u003c\/strong\u003e up to 32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput protocol:\u003c\/strong\u003e UART (u-blox); I2C for compass\/baro models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBaud rate:\u003c\/strong\u003e 115200 bps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpdate rate:\u003c\/strong\u003e 10Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed accuracy:\u003c\/strong\u003e 0.05 m\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorizontal accuracy:\u003c\/strong\u003e 2D 1.5m (open sky)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e tracking -162dBm, acquisition -160dBm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna:\u003c\/strong\u003e 25 x 25mm ceramic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWiring \u0026amp; setup\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPS:\u003c\/strong\u003e TX\/RX to a free UART on the flight controller (TX to RX, RX to TX), plus 5V and GND.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompass \/ baro models:\u003c\/strong\u003e connect SDA\/SCL to the FC's I2C pads. Without I2C the GPS still works for GPS Rescue \/ RTH, just without the compass and baro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e Betaflight 4.3 or newer (older versions don't support M10), INAV and ArduPilot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eINAV compass alignment:\u003c\/strong\u003e QMC5883 = CW 0° flip, IST8310 = CW 90° flip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e antenna facing up, away from the VTX, power leads and motors. For micro builds choose a nano GPS (e.g. \u003ca href=\"\/products\/tbs-m10n-nano-gps-glonass-module\"\u003eTBS M10N\u003c\/a\u003e).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFC \/ stacks with I2C: \u003ca href=\"\/products\/speedybee-f405-v5-ox32-55a-stack\"\u003eSpeedyBee F405 V5 Stack\u003c\/a\u003e, \u003ca href=\"\/products\/matek-h743-slim-v4-flight-controller\"\u003eMatek H743-SLIM V4\u003c\/a\u003e, \u003ca href=\"\/products\/micoair743-v2-am32-stack\"\u003eMicoAir743 V2 Stack\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-h743-bt-8bit-80a-stack\"\u003eGEPRC TAKER H743 Stack\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-f722-bt-8bit-60a-stack\"\u003eGEPRC TAKER F722 60A Stack\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFixed-wing FC: \u003ca href=\"\/products\/speedybee-f405-wing-app-fixed-wing-flight-controller\"\u003eSpeedyBee F405 Wing\u003c\/a\u003e, \u003ca href=\"\/products\/matek-wing-flight-controller-v3\"\u003eMatek Wing V3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eLong-range frame: \u003ca href=\"\/products\/geprc-gep-moz7-v2-frame\"\u003eGEPRC MOZ7 V2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x GPS module (model as selected)\u003c\/li\u003e\n\u003cli\u003e1 x terminal wire\u003c\/li\u003e\n\u003cli\u003e1 x instruction manual\u003c\/li\u003e\n\u003cli\u003e1 x GEPRC sticker\u003c\/li\u003e\n\u003cli\u003e1 x heat shrink tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eNote: due to DPS310 supply constraints, GEPRC may ship the DPS368 barometer on D models instead. There is no difference in performance or usage between the two.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"GEP-M1025","offer_id":69480324562978,"sku":"GEP-M1025","price":1999.0,"currency_code":"INR","in_stock":false},{"title":"GEP-M1025Q","offer_id":69480324595746,"sku":"GEP-M1025Q","price":1999.0,"currency_code":"INR","in_stock":false},{"title":"GEP-M1025-DQ","offer_id":46422524952610,"sku":"GEP-M1025-DQ","price":2699.0,"currency_code":"INR","in_stock":true},{"title":"GEP-M1025-MQ","offer_id":69480324628514,"sku":"GEP-M1025-MQ","price":2999.0,"currency_code":"INR","in_stock":true},{"title":"GEP-M1025I","offer_id":69480324661282,"sku":"GEP-M1025I","price":1999.0,"currency_code":"INR","in_stock":false},{"title":"GEP-M1025-DI","offer_id":69480324694050,"sku":"GEP-M1025-DI","price":2899.0,"currency_code":"INR","in_stock":true},{"title":"GEP-M1025-MI","offer_id":69480324726818,"sku":"GEP-M1025-MI","price":1999.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/7-2.jpg?v=1793098811"},{"product_id":"geprc-gep-m10-series-gps-module","title":"GEPRC GEP-M10 Series GPS Module","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEP-M10 series is GEPRC's compact GPS line, built on the u-blox M10050 chip. It supports GPS + BDS + Galileo + QZSS + SBAS joint positioning across up to 32 satellites, with a built-in Flash chip and Farad capacitor that save configuration and give a fast hot start.\u003c\/p\u003e\n\u003cp\u003eThe series comes in six models: the tiny \u003cstrong\u003eGEP-M10nano\u003c\/strong\u003e (12x12mm antenna, 15x15mm board) for micro builds, and the standard \u003cstrong\u003eGEP-M10\u003c\/strong\u003e size (18x18mm antenna, 22x22mm board) available GPS-only or with an optional \u003cstrong\u003eQMC5883L\u003c\/strong\u003e or \u003cstrong\u003eIST8310\u003c\/strong\u003e magnetometer and \u003cstrong\u003eDPS310\u003c\/strong\u003e barometer. Suitable for most FPV quadcopters, multirotors and fixed-wing models.\u003c\/p\u003e\n\u003ch3\u003eChoose your model\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eMagnetometer (compass)\u003c\/th\u003e\n\u003cth\u003eBarometer\u003c\/th\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M10nano\u003c\/td\u003e\n\u003ctd\u003e15x15mm, 12mm antenna\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eUART\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M10\u003c\/td\u003e\n\u003ctd\u003e22x22mm, 18mm antenna\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eUART\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M10Q\u003c\/td\u003e\n\u003ctd\u003e22x22mm, 18mm antenna\u003c\/td\u003e\n\u003ctd\u003eQMC5883L\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eUART + I2C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M10-DQ\u003c\/td\u003e\n\u003ctd\u003e22x22mm, 18mm antenna\u003c\/td\u003e\n\u003ctd\u003eQMC5883L\u003c\/td\u003e\n\u003ctd\u003eDPS310\u003c\/td\u003e\n\u003ctd\u003eUART + I2C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M10I\u003c\/td\u003e\n\u003ctd\u003e22x22mm, 18mm antenna\u003c\/td\u003e\n\u003ctd\u003eIST8310\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eUART + I2C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGEP-M10-DI\u003c\/td\u003e\n\u003ctd\u003e22x22mm, 18mm antenna\u003c\/td\u003e\n\u003ctd\u003eIST8310\u003c\/td\u003e\n\u003ctd\u003eDPS310\u003c\/td\u003e\n\u003ctd\u003eUART + I2C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eQ = QMC5883L compass, I = IST8310 compass, D = DPS310 baro. Need a bigger 25mm antenna? See the \u003ca href=\"\/products\/geprc-gep-m1025-series-gps-module\"\u003eGEP-M1025 Series\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eu-blox M10050 chip\u003c\/li\u003e\n\u003cli\u003eGPS + BDS + Galileo + QZSS + SBAS joint positioning\u003c\/li\u003e\n\u003cli\u003eFast positioning, up to 32 satellites\u003c\/li\u003e\n\u003cli\u003eStable connection quality\u003c\/li\u003e\n\u003cli\u003e12x12mm or 18x18mm ceramic antenna\u003c\/li\u003e\n\u003cli\u003eBuilt-in Flash chip and Farad capacitor for quick hot start\u003c\/li\u003e\n\u003cli\u003eOnboard indicator light\u003c\/li\u003e\n\u003cli\u003eOptional integrated magnetometer + barometer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPS chip:\u003c\/strong\u003e u-blox M10050\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage:\u003c\/strong\u003e 3.3V – 5V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceiving frequency:\u003c\/strong\u003e GPS L1, GLONASS L1, BDS B1, Galileo E1, SBAS L1, QZSS L1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels:\u003c\/strong\u003e 72\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellites:\u003c\/strong\u003e up to 32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput protocol:\u003c\/strong\u003e UART (u-blox); I2C for compass\/baro models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBaud rate:\u003c\/strong\u003e 115200 bps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpdate rate:\u003c\/strong\u003e 10Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed accuracy:\u003c\/strong\u003e 0.05 m\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorizontal accuracy:\u003c\/strong\u003e 2D 1.5m (open sky)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTiming accuracy:\u003c\/strong\u003e 30 ns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e tracking -162dBm, acquisition -160dBm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLimits:\u003c\/strong\u003e max height 50,000m, max speed 500m\/s, max acceleration 4G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 15 x 15 x 7.5mm (M10nano), 22 x 22 x 8.2mm (all others)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna:\u003c\/strong\u003e 12 x 12mm (M10nano), 18 x 18mm (all others)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.1g (M10nano), 7.8g (M10)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWiring \u0026amp; setup\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPS:\u003c\/strong\u003e TX\/RX to a free UART on the flight controller (TX to RX, RX to TX), plus 5V and GND. M10nano and M10 use 4 wires.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompass \/ baro models (Q, DQ, I, DI):\u003c\/strong\u003e also connect SDA\/SCL to the FC's I2C pads. Without I2C the GPS still works for GPS Rescue \/ RTH, just without compass and baro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e Betaflight 4.3 or newer (older versions don't support M10), INAV and ArduPilot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eINAV compass alignment:\u003c\/strong\u003e QMC5883 = CW 0° flip, IST8310 = CW 90° flip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e antenna side up, away from the VTX, power leads and motors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFC \/ stacks with I2C: \u003ca href=\"\/products\/speedybee-f405-v5-ox32-55a-stack\"\u003eSpeedyBee F405 V5 Stack\u003c\/a\u003e, \u003ca href=\"\/products\/speedybee-f405-mini-bls-35a-20x20-stack\"\u003eSpeedyBee F405 Mini 20x20 Stack\u003c\/a\u003e, \u003ca href=\"\/products\/matek-h743-slim-v4-flight-controller\"\u003eMatek H743-SLIM V4\u003c\/a\u003e, \u003ca href=\"\/products\/micoair743-v2-am32-stack\"\u003eMicoAir743 V2 Stack\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-f722-bt-8bit-60a-stack\"\u003eGEPRC TAKER F722 60A Stack\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-h743-bt-8bit-80a-stack\"\u003eGEPRC TAKER H743 Stack\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFixed-wing FC: \u003ca href=\"\/products\/speedybee-f405-wing-app-fixed-wing-flight-controller\"\u003eSpeedyBee F405 Wing\u003c\/a\u003e, \u003ca href=\"\/products\/matek-wing-flight-controller-v3\"\u003eMatek Wing V3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eLarger antenna option: \u003ca href=\"\/products\/geprc-gep-m1025-series-gps-module\"\u003eGEPRC GEP-M1025 Series GPS\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x GPS module (model as selected)\u003c\/li\u003e\n\u003cli\u003e1 x terminal wire\u003c\/li\u003e\n\u003cli\u003e1 x instruction manual\u003c\/li\u003e\n\u003cli\u003e1 x GEPRC sticker\u003c\/li\u003e\n\u003cli\u003e1 x heat shrink tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eNote: due to DPS310 supply constraints, GEPRC may ship the DPS368 barometer on D models instead. There is no difference in performance or usage between the two.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"GEP-M10","offer_id":69480398716962,"sku":"GEP-M10","price":1999.0,"currency_code":"INR","in_stock":false},{"title":"GEP-M10Q","offer_id":69480398749730,"sku":"GEP-M10Q","price":1999.0,"currency_code":"INR","in_stock":false},{"title":"GEP-M10-DQ","offer_id":46422525313058,"sku":"GEP-M10-DQ","price":2499.0,"currency_code":"INR","in_stock":true},{"title":"GEP-M10-DI","offer_id":69480398815266,"sku":"GEP-M10-DI","price":2599.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1.jpg?v=1793099130"},{"product_id":"geprc-gep-vapor-d5-frame","title":"GEPRC GEP-Vapor-D5 Frame","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eGEPRC's Vapor-D is a deadcat-layout 5-inch freestyle and cinematic frame. The DC geometry pushes the front arms out of the camera's field of view, so you get clean footage without props in shot while keeping the flexibility of a wide-X build. CNC-machined aluminium lens guard panels and a front guard give the camera double protection, and the quick-release design keeps rebuilds fast after a crash.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_Main_0001.jpg\" alt=\"GEPRC GEP-Vapor-D5 Frame - side view\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/3_Main_0001.jpg\" alt=\"GEPRC GEP-Vapor-D5 Frame\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/5_Main_0001.jpg\" alt=\"GEPRC GEP-Vapor-D5 Frame\"\u003e\n\u003ch3\u003eChoose your colour\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack\u003c\/strong\u003e (GEPRC code GP107480) - the original Vapor-D5 in bare carbon fibre.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolographic White\u003c\/strong\u003e (GEPRC code GP108282) - the newer O4 Pro edition with a colour-shifting chameleon coating under a hard clear coat that resists scratches, wear and corrosion. Same geometry and mounts, plus a redesigned CNC aluminium camera mount for the DJI O4 Air Unit Pro, Mecha-style side plates, and a rear VTX antenna mount that takes the stock O4 Pro antenna or an SMA adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eGEP-Vapor-D5 Frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheelbase\u003c\/th\u003e\n\u003ctd\u003e238.4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eBlack: 200.8g (±2g) \/ Holographic White: 219.8g (±5g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm thickness\u003c\/th\u003e\n\u003ctd\u003e5.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlate thickness\u003c\/th\u003e\n\u003ctd\u003etop 2.0mm, middle 2.0mm, bottom 2.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFC mounting\u003c\/th\u003e\n\u003ctd\u003e20 x 20mm \/ 30.5 x 30.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVTX mounting\u003c\/th\u003e\n\u003ctd\u003e20 x 20mm \/ 25 x 25mm \/ 30.5 x 30.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor mounting\u003c\/th\u003e\n\u003ctd\u003e16 x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCamera mounting\u003c\/th\u003e\n\u003ctd\u003e19mm \/ 20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended propeller\u003c\/th\u003e\n\u003ctd\u003e5 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStack:\u003c\/strong\u003e 20 x 20 or 30.5 x 30.5mm. Not 25.5mm AIO boards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotors:\u003c\/strong\u003e 16x16mm mounts only - 2207 \/ 2306 class. Motors with 19x19mm-only bases will not fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo:\u003c\/strong\u003e 19 or 20mm cameras - DJI O4 Pro \/ O3, analog, Walksnail, HDZero. The Holographic White's camera mount is purpose-built for the O4 Air Unit Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD5 or D6?\u003c\/strong\u003e D5 for 5\" props; the \u003ca href=\"\/products\/geprc-gep-vapor-d6-frame\"\u003eD6\u003c\/a\u003e is the 6\" version.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStacks: \u003ca href=\"\/products\/geprc-taker-f722-bt-32bit-50a-stack\"\u003eGEPRC TAKER F722 50A\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-f405-bls-60a-v2-stack\"\u003eGEPRC TAKER F405 BLS V2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors: \u003ca href=\"\/products\/geprc-speedx2-2207e-motor\"\u003eGEPRC SPEEDX2 2207E\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eProps: \u003ca href=\"\/products\/hqprop-freestyle-dp-5x4-3x3-v2s-propeller\"\u003eHQProp DP 5x4.3x3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x GEP-Vapor-D5 frame (colour as selected)\u003c\/li\u003e\n\u003cli\u003e2 x M20 x 250mm battery straps\u003c\/li\u003e\n\u003cli\u003e2 x silicone battery anti-slip pads\u003c\/li\u003e\n\u003cli\u003e1 x screw set\u003c\/li\u003e\n\u003cli\u003e1 x 3D-printed parts pack\u003c\/li\u003e\n\u003cli\u003eBlack: L-shaped screwdrivers (1.5mm \/ 2mm \/ 3mm) and 1 x M8 wrench\u003c\/li\u003e\n\u003cli\u003eHolographic White: 1 x 4-in-1 hex screwdriver and 1 x M8 ratchet socket wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"Black","offer_id":46426996113442,"sku":"GP107480","price":6899.0,"currency_code":"INR","in_stock":false},{"title":"Holographic White","offer_id":69443097428002,"sku":"GP108282","price":9399.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_Main_0001.jpg?v=1787739685"},{"product_id":"geprc-gep-vapor-d6-frame","title":"GEPRC GEP-Vapor-D6 Frame","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe 6-inch version of GEPRC's Vapor-D deadcat frame. Same cinematic-first design as the D5 — the DC arm geometry keeps propellers out of the camera's view for clean footage, with the manoeuvrability of a wide-X layout — but stretched to a 274.6mm wheelbase for 6-inch props, longer flight times and a more planted feel in wind.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_Main_0001-1.jpg\" alt=\"GEPRC GEP-Vapor-D6 Frame - side view\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/3_Main_0001-2.jpg\" alt=\"GEPRC GEP-Vapor-D6 Frame\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/5_Main_0001-2.jpg\" alt=\"GEPRC GEP-Vapor-D6 Frame\"\u003e\u003cp\u003eCNC-machined aluminium lens guard panels plus a front guard protect the camera from both sides, the carbon layup keeps weight down at 203.8g, and the quick-release construction makes arm swaps straightforward.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eGEP-Vapor-D6 Frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheelbase\u003c\/th\u003e\n\u003ctd\u003e274.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e203.8g (+\/- 2g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm thickness\u003c\/th\u003e\n\u003ctd\u003e5.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlate thickness\u003c\/th\u003e\n\u003ctd\u003etop 2.0mm, middle 2.0mm, bottom 2.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFC mounting\u003c\/th\u003e\n\u003ctd\u003e20 x 20mm \/ 30.5 x 30.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVTX mounting\u003c\/th\u003e\n\u003ctd\u003e20 x 20mm \/ 25 x 25mm \/ 30.5 x 30.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor mounting\u003c\/th\u003e\n\u003ctd\u003e16 x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCamera mounting\u003c\/th\u003e\n\u003ctd\u003e19mm \/ 20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended propeller\u003c\/th\u003e\n\u003ctd\u003e6 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStack:\u003c\/strong\u003e 20 x 20 or 30.5 x 30.5mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotors:\u003c\/strong\u003e 16x16mm mounts - 2207 \/ 2306 \/ 2407 class, lower KV (around 1700-1800KV on 6S) for 6\" props.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProps:\u003c\/strong\u003e 6 inch. 5\" props fit but waste the frame; for 5\" use the \u003ca href=\"\/products\/geprc-gep-vapor-d5-frame\"\u003eVapor-D5\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStacks: \u003ca href=\"\/products\/geprc-taker-f722-bt-8bit-60a-stack\"\u003eGEPRC TAKER F722 60A\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-f405-bls-60a-v2-stack\"\u003eGEPRC TAKER F405 BLS V2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors: \u003ca href=\"\/products\/iflight-xing-e-pro-2207-motor\"\u003eiFlight Xing E Pro 2207 1800KV\u003c\/a\u003e, \u003ca href=\"\/products\/t-motor-pacer-v4-p2406-motor\"\u003eT-Motor Pacer V4 P2406\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGPS: \u003ca href=\"\/products\/geprc-gep-m10-series-gps-module\"\u003eGEPRC GEP-M10-DQ\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x GEP-Vapor-D6 frame\u003c\/li\u003e\n\u003cli\u003e2 x M20 x 250mm battery straps\u003c\/li\u003e\n\u003cli\u003e2 x silicone battery pads\u003c\/li\u003e\n\u003cli\u003e1 x screw set\u003c\/li\u003e\n\u003cli\u003e1 x 3D-printed parts pack\u003c\/li\u003e\n\u003cli\u003eL-shaped screwdrivers (1.5mm \/ 2mm \/ 3mm)\u003c\/li\u003e\n\u003cli\u003e1 x M8 wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"Default Title","offer_id":46426996342818,"sku":"GP107481","price":7999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_Main_0001-1.jpg?v=1787739695"},{"product_id":"geprc-soma-3-3g-antenna","title":"GEPRC SOMA 3.3G Antenna","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC SOMA 3.3G is a 170mm RHCP antenna in a moulded enclosure, designed for stable video with 3.3GHz long-range analog VTXs such as the GEPRC MATEN 3.3G. 3.3GHz penetrates obstacles and foliage better than 5.8GHz, which is why it is popular for long-range flying.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/Sbcc940e6781c4b59ba9d2faf2a325dda8.jpg\" alt=\"GEPRC SOMA 3.3G Antenna\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eMoulded enclosure for durability\u003c\/li\u003e\n\u003cli\u003e4.85dBi gain, 85% radiation efficiency\u003c\/li\u003e\n\u003cli\u003ePairs with GEPRC MATEN 3.3G VTX and VRX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_DeMain_0000-13.jpg\" alt=\"GEPRC SOMA 3.3G Antenna\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_DeMain_0000-5_3226f914-ffcf-4b3f-a15a-8d006f241e43.jpg\" alt=\"GEPRC SOMA 3.3G Antenna\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCentre frequency\u003c\/th\u003e\n\u003ctd\u003e3.3GHz (3.0–3.5GHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePolarisation\u003c\/th\u003e\n\u003ctd\u003eRHCP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGain\u003c\/th\u003e\n\u003ctd\u003e4.85dBi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSWR\u003c\/th\u003e\n\u003ctd\u003e≤1.44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eSMA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e170mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e22g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.3GHz only\u003c\/strong\u003e - for 3.3GHz VTXs and receivers. It will not work on 5.8GHz or 1.2GHz equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector: SMA, RHCP\u003c\/strong\u003e - use RHCP on both the VTX and the receiver side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e 7-10\" long-range quads (170mm, 22g).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReceiver-side patch: \u003ca href=\"\/products\/geprc-soma-3-3g-directional-patch-antenna\"\u003eGEPRC SOMA 3.3G Directional Patch\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e 3.3GHz is not a licence-free band in many countries, including India. Check your local regulations before transmitting.\u003c\/p\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1x GEPRC SOMA 3.3G antenna (RHCP, SMA, 170mm)\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"RHCP 170mm","offer_id":46429709074466,"sku":"GP107226","price":1699.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/S4585e478389141a8a855daed96447e40s.jpg?v=1787654704"},{"product_id":"geprc-triple-feed-patch-array-5-8ghz","title":"GEPRC Triple Feed Patch Array 5.8GHz Antenna","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eGEPRC Triple Feed Patch Array — directional, circularly-polarized 5.8GHz FPV antenna using an array of 7 coupled patches for high gain, best suited to long-range flying rather than general FPV.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/3-1.jpg\" alt=\"GEPRC Triple Feed Patch Array Antenna\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2-2.jpg\" alt=\"GEPRC Triple Feed Patch Array 5.8G Antenna\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency\u003c\/th\u003e\n\u003ctd\u003e5.8GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePolarization\u003c\/th\u003e\n\u003ctd\u003eRHCP\/LHCP (switchable via connector)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGain\u003c\/th\u003e\n\u003ctd\u003e14dBi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eSMA (2x, one terminated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround-station \/ goggle antenna\u003c\/strong\u003e with an SMA connector - not for mounting on a quad.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose RHCP or LHCP\u003c\/strong\u003e by which port you connect (terminate the other) - match it to the antenna on your quad.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery narrow beam (14dBi):\u003c\/strong\u003e you must keep it pointed at the quad. Use it on one diversity port with an omni on the other for close-in flying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOmni partner: \u003ca href=\"\/products\/foxeer-lollipop-4-antenna\"\u003eFoxeer Lollipop 4 (RHCP)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGoggles: \u003ca href=\"\/products\/skyzone-cobra-x-v4-5-8ghz-fpv-goggles\"\u003eSkyzone Cobra X V4\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eQuad side: \u003ca href=\"\/products\/iflight-albatross-v2-1-5-8ghz-antenna-130mm-rhcp-sma\"\u003eiFlight Albatross V2.1 (RHCP)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x antenna\u003c\/li\u003e\n\u003cli\u003e1x terminator\u003c\/li\u003e\n\u003cli\u003e1x SMA cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"Default","offer_id":46429709860898,"sku":"AF-GEP-TRIPLE-FEED-PATCH-5.8GHZ","price":2399.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1-1.jpg?v=1787654725"},{"product_id":"geprc-momoda2-5-8g-dual-antenna","title":"GEPRC Momoda2 5.8G DUAL Antenna","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eGEPRC Momoda2 5.8G DUAL antenna — a dual-core RHCP SMA antenna with enhanced gain and coverage, available in 90mm and 170mm lengths.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_DeMain_0000-1.jpg\" alt=\"GEPRC Momoda2 DUAL Antenna\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/4_DeMain_0000-1.jpg\" alt=\"GEPRC Momoda2 5.8G DUAL Antenna\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/5_DeMain_0000-1.jpg\" alt=\"GEPRC Momoda2 5.8G DUAL Antenna\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter frequency\u003c\/th\u003e\n\u003ctd\u003e5.65GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBandwidth\u003c\/th\u003e\n\u003ctd\u003e5.3–6GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePolarization\u003c\/th\u003e\n\u003ctd\u003eRHCP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGain\u003c\/th\u003e\n\u003ctd\u003e3.8dBi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAxial ratio\u003c\/th\u003e\n\u003ctd\u003e≤3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVSWR\u003c\/th\u003e\n\u003ctd\u003e≤1.43\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eSMA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e90mm or 170mm (170mm version: 170mm + 57mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e16.6g (GEPRC figure for the 170mm version)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eChoosing a length\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e90mm\u003c\/strong\u003e (GEPRC code GP107308) - compact, for goggles and builds where a long antenna would snag.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e170mm\u003c\/strong\u003e (GEPRC code GP106742) - lifts the radiating pods clear of the frame and props, the better choice on 5-7\" and long-range quads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector: SMA, RHCP\u003c\/strong\u003e - fits SMA VTXs and goggles; pair with RHCP antennas on the other end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16.6g\u003c\/strong\u003e - heavier than single-element antennas, so best on goggles or 5-7\" quads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGoggles: \u003ca href=\"\/products\/skyzone-cobra-x-v4-5-8ghz-fpv-goggles\"\u003eSkyzone Cobra X V4\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"SMA \/ RHCP \/ 90mm","offer_id":46429711171618,"sku":"GP107308","price":1299.0,"currency_code":"INR","in_stock":true},{"title":"SMA \/ RHCP \/ 170mm","offer_id":69442465857570,"sku":"GP106742","price":1399.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_DeMain_0000-1.jpg?v=1787653114"},{"product_id":"geprc-momoda2-5-8g-antenna","title":"GEPRC Momoda2 5.8G Antenna","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC Momoda2 is a 5.8GHz circularly-polarised antenna that pairs a PCB element with an FPC structure for consistent frequency response and minimal transmission loss. It comes in RHCP or LHCP, with SMA, U.FL or MMCX connectors and lengths from 90mm to 170mm, so one design covers whoops through 7\" quads and goggles.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2-9.jpg\" alt=\"GEPRC Momoda2 Antenna\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003ePCB + FPC element for consistent tuning across the band\u003c\/li\u003e\n\u003cli\u003eLow transmission loss, 85% radiation efficiency\u003c\/li\u003e\n\u003cli\u003e-25dB cross-polarisation suppression\u003c\/li\u003e\n\u003cli\u003eABS housing, every unit SWR-tested\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/5_Main_0000-2_25a0ed87-50c0-40a6-86b7-b13de02989c4.jpg\" alt=\"GEPRC Momoda2 antenna family\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCentre frequency\u003c\/th\u003e\n\u003ctd\u003e5.65GHz (5.3–6.0GHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGain\u003c\/th\u003e\n\u003ctd\u003e2.45dBi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAxial ratio\u003c\/th\u003e\n\u003ctd\u003e≤3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSWR\u003c\/th\u003e\n\u003ctd\u003e≤1.43\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePolarisation\u003c\/th\u003e\n\u003ctd\u003eRHCP or LHCP (per variant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eSMA, U.FL or MMCX (per variant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3.8–11.6g depending on connector and length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eVariants available\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector \/ polarisation \/ length\u003c\/th\u003e\n\u003ctd\u003eGEPRC code\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSMA \/ RHCP \/ 90mm\u003c\/th\u003e\n\u003ctd\u003eGP106671\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSMA \/ RHCP \/ 120mm\u003c\/th\u003e\n\u003ctd\u003eGP106669\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSMA \/ LHCP \/ 90mm\u003c\/th\u003e\n\u003ctd\u003eGP106672\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eU.FL \/ LHCP \/ 110mm (60mm + 50mm)\u003c\/th\u003e\n\u003ctd\u003eGP106676\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMMCX \/ RHCP \/ 170mm (100mm + 70mm)\u003c\/th\u003e\n\u003ctd\u003eGP106677\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatch polarisation\u003c\/strong\u003e - RHCP pairs with RHCP, LHCP with LHCP. Mixing them costs most of the signal. RHCP is the usual default on analog gear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSMA\u003c\/strong\u003e - fits SMA VTXs and goggles. RP-SMA ports won't fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eU.FL\u003c\/strong\u003e - plugs straight onto U.FL\/IPEX VTXs on whoops and small builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMMCX\u003c\/strong\u003e - fits MMCX-port VTXs such as the TBS Unify Pro32 series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSMA VTX: \u003ca href=\"\/products\/hglrc-zeus-800mw-smart-mounting-vtx\"\u003eHGLRC Zeus 800mW\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMMCX VTX: \u003ca href=\"\/products\/tbs-unify-pro32-hv-mmcx\"\u003eTBS Unify Pro32 HV MMCX\u003c\/a\u003e, \u003ca href=\"\/products\/tbs-unify-pro32-dp-mmcx\"\u003eTBS Unify Pro32 DP MMCX\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGoggle patch (RHCP): \u003ca href=\"\/products\/foxeer-echo-2-patch-feeder-antenna\"\u003eFoxeer Echo 2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1x GEPRC Momoda2 5.8G antenna (connector, polarisation and length as selected)\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"SMA \/ RHCP \/ 90mm","offer_id":46429712089122,"sku":"AF-GEP-MOMODA2-5.8G-RHCPSMA90MM","price":899.0,"currency_code":"INR","in_stock":true},{"title":"SMA \/ RHCP \/ 120mm","offer_id":47153381015586,"sku":"AF-GEP-MOMODA2-5.8G-RHCPSMA120MM","price":899.0,"currency_code":"INR","in_stock":false},{"title":"SMA \/ LHCP \/ 90mm","offer_id":47153381048354,"sku":"AF-GEP-MOMODA2-5.8G-LHCPSMA90MM","price":899.0,"currency_code":"INR","in_stock":true},{"title":"U.FL \/ LHCP \/ 110mm","offer_id":47153381081122,"sku":"AF-GEP-MOMODA2-5.8G-LHCPUFL110MM","price":899.0,"currency_code":"INR","in_stock":true},{"title":"MMCX \/ RHCP \/ 170mm","offer_id":68693841051682,"sku":"AF-GEP-MOMODA2-5.8G-RHCPMMCX170MM","price":899.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1-8.jpg?v=1787653103"},{"product_id":"geprc-gep-vapor-x5-o4-pro-frame","title":"GEPRC GEP-Vapor-X5 O4 Pro Frame","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC Vapor O4 Pro frame is designed specifically for the DJI O4 Air Unit Pro. Redesigned aluminium camera parts and improved vibration-damping silicone give better compatibility. Mech-inspired side panels add a bold, sharp look, and the XH structure delivers stability and precise handling. Available in two finishes: \u003cstrong\u003eStandard\u003c\/strong\u003e and \u003cstrong\u003eHolographic White\u003c\/strong\u003e, a colour-shifting chameleon finish. Both are the same frame.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_Main_0001-6.jpg\" alt=\"GEPRC GEP-Vapor-X5 O4 Pro Frame - detail\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003e5mm wide carbon fiber arms for better rigidity and durability\u003c\/li\u003e\n\u003cli\u003eDual protection with camera guard side panels and a front lip design for better impact resistance\u003c\/li\u003e\n\u003cli\u003eQuick-release design for easy repairs and maintenance\u003c\/li\u003e\n\u003cli\u003eRedesigned aluminum camera mount, matched to the O4 Pro VTX\u003c\/li\u003e\n\u003cli\u003eRear antenna mount supports both the original O4 Pro antenna and SMA adapters\u003c\/li\u003e\n\u003cli\u003eTwo finishes: Standard or Holographic White\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/5_Main_0001-1.jpg\" alt=\"GEPRC GEP-Vapor-X5 O4 Pro Frame\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_Main_0000-4_51bebaf5-f285-434e-addb-54a51952f3bc.jpg\" alt=\"GEPRC GEP-Vapor-X5 O4 Pro Frame - Holographic White\"\u003e\u003ch3\u003eX5 Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWheelbase\u003c\/th\u003e\n\u003ctd\u003e230mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTop\/middle plate thickness\u003c\/th\u003e\n\u003ctd\u003e2.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm thickness\u003c\/th\u003e\n\u003ctd\u003e5.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBottom plate thickness\u003c\/th\u003e\n\u003ctd\u003e2.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFC mounting\u003c\/th\u003e\n\u003ctd\u003e20x20mm \/ 30.5x30.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVTX mounting\u003c\/th\u003e\n\u003ctd\u003e20x20mm \/ 25x25mm \/ 30.5x30.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor mounting\u003c\/th\u003e\n\u003ctd\u003e16x16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCamera mounting\u003c\/th\u003e\n\u003ctd\u003e19mm \/ 20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended propeller\u003c\/th\u003e\n\u003ctd\u003e5-inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e206±5g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for the DJI O4 Air Unit Pro:\u003c\/strong\u003e the aluminium camera mount matches it, and 19-20mm analog or other HD cameras also fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStack:\u003c\/strong\u003e 20 x 20 or 30.5 x 30.5mm. \u003cstrong\u003eMotors:\u003c\/strong\u003e 16x16mm (2207 \/ 2306 class).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStacks: \u003ca href=\"\/products\/geprc-taker-f722-bt-32bit-50a-stack\"\u003eGEPRC TAKER F722 50A\u003c\/a\u003e, \u003ca href=\"\/products\/speedybee-f405-v5-ox32-55a-stack\"\u003eSpeedyBee F405 V5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors: \u003ca href=\"\/products\/geprc-speedx2-2207e-motor\"\u003eGEPRC SPEEDX2 2207E\u003c\/a\u003e, \u003ca href=\"\/products\/t-motor-velox-v3-2207-motor\"\u003eT-Motor Velox V3 2207\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x GEP-Vapor-X5 O4 Pro Frame, 2x M20x250mm battery straps, 2x battery silicone pads\u003c\/li\u003e\n\u003cli\u003e1x screw set, 1x printout package, 3x L-shaped screwdrivers (1.5\/2\/3mm), 1x M8 wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"Standard","offer_id":46432414826530,"sku":"AF-GEP-GEPVAPORX5-O4-PRO","price":6899.0,"currency_code":"INR","in_stock":true},{"title":"Holographic White","offer_id":69355004297250,"sku":"AF-GEP-GEPVAPORX5-O4-PRO-HOLOGRAPHIC","price":9399.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_Main_0000-5.jpg?v=1787739708"},{"product_id":"geprc-mark4-7-frame","title":"GEPRC Mark4-7 Frame","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eOriginal Mark4 7\" from GEPRC — a quality frame suitable for building a long-range drone with up to 7\" propellers. The center section accommodates a stack with 30.5x30.5mm and 20x20mm hole spacing, and the rear has space for a video transmitter with the same spacing plus room for a small capacitor. Especially suitable for building an analog drone.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/22622-1000_1000.jpg\" alt=\"GEPRC Mark4-7 Frame\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDiagonal motor distance\u003c\/th\u003e\n\u003ctd\u003e295mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e121g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm thickness\u003c\/th\u003e\n\u003ctd\u003e5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStack mounting\u003c\/th\u003e\n\u003ctd\u003e30.5x30.5mm M3 \/ 20x20mm M2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVTX mounting\u003c\/th\u003e\n\u003ctd\u003e30.5x30.5mm M3 \/ 20x20mm M2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor mounting\u003c\/th\u003e\n\u003ctd\u003e16mm \/ 19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTop plate\u003c\/th\u003e\n\u003ctd\u003e2.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBottom plate\u003c\/th\u003e\n\u003ctd\u003e2.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCamera size\u003c\/th\u003e\n\u003ctd\u003eMicro (19mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStack:\u003c\/strong\u003e 30.5 x 30.5mm (M3) or 20 x 20mm (M2).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotors:\u003c\/strong\u003e 16 or 19mm mounts - 2806-2809 class around 1300KV on 6S for 7\" props.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera:\u003c\/strong\u003e 19mm micro size - best for analog. A 20mm DJI O4 Pro camera needs a different mount; for an O4 Pro 7\" build see the \u003ca href=\"\/products\/geprc-gep-moz7-v2-frame\"\u003eGEP-MOZ7 V2\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStacks: \u003ca href=\"\/products\/geprc-taker-f405-bls-v2-stack\"\u003eGEPRC TAKER F405 BLS V2 (65A option)\u003c\/a\u003e, \u003ca href=\"\/products\/t-motor-velox-v70a-esc-f7-fc-se-6-8s-4in1-freestyle-stack\"\u003eT-Motor Velox F7 SE + V70A\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors: \u003ca href=\"\/products\/geprc-speedx2-2809-motor-1280kv\"\u003eGEPRC SPEEDX2 2809 1280KV\u003c\/a\u003e, \u003ca href=\"\/products\/rcinpower-aos-supernova-2807-motor-1333kv\"\u003eRCinPower Supernova 2807+\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eProps: \u003ca href=\"\/products\/gemfan-flash-7040-3-propeller\"\u003eGemfan Flash 7040-3\u003c\/a\u003e, \u003ca href=\"\/products\/hqprop-dp-7x3-5x3-pc-propeller\"\u003eHQProp DP 7x3.5x3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalog VTX: \u003ca href=\"\/products\/tbs-unify-pro32-hv-mmcx\"\u003eTBS Unify Pro32 HV\u003c\/a\u003e; GPS \u003ca href=\"\/products\/geprc-gep-m1025-dq-gps-module\"\u003eGEPRC GEP-M1025-DQ\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1x Frame, 1x 3D printed antenna mount\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"Default","offer_id":46432415350818,"sku":"GP106119","price":5399.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/S9ef9dbcdfcba45faaf80cc08217103e4F_2024-04-08T17_29_09.385Z.png?v=1787739720"},{"product_id":"geprc-gep-cl30-v3-frame","title":"GEPRC GEP-CL30 V3 Frame","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eGEP-CL30 V3 is a frame for building a 3\" cinewhoop, optimized for DJI O4 Pro digital video transmission. Its core structure is a 2.5mm carbon plate complemented by plastic propeller guards that also protect the drone's electronics, with aluminum reinforcements in the central section for added strength. Includes a utility board integrating USB-C, XT30, capacitor, buzzer, and RC receiver space. Disassembles with just 6 screws.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/5_DeMain_0000.jpg\" alt=\"GEPRC GEP-CL30 V3 Frame - detail\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/30289-1000_1000.jpg\" alt=\"GEPRC GEP-CL30 V3 Frame\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDiagonal motor pitch\u003c\/th\u003e\n\u003ctd\u003e128mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax propeller\u003c\/th\u003e\n\u003ctd\u003e3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible\u003c\/th\u003e\n\u003ctd\u003eDJI O4 Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor mounting\u003c\/th\u003e\n\u003ctd\u003e9mm M2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAIO mounting\u003c\/th\u003e\n\u003ctd\u003e25.5x25.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVTX mounting\u003c\/th\u003e\n\u003ctd\u003e20x20 \/ 25.5x25.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower connector\u003c\/th\u003e\n\u003ctd\u003eXT30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e78g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlight controller: 25.5 x 25.5mm AIO only\u003c\/strong\u003e - 20x20 and 30.5x30.5 stacks will not fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotors:\u003c\/strong\u003e 9mm M2 mounts - 1404-1505 class (e.g. 3850KV on 4S).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProps:\u003c\/strong\u003e 3\" (75mm) ducted props with a 1.5mm hole or T-mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery lead:\u003c\/strong\u003e XT30 on the utility board - 4S-6S packs with XT30 or an adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAIO boards: \u003ca href=\"\/products\/geprc-taker-f722-45a-32bit-aio\"\u003eGEPRC TAKER F722 45A AIO\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-g4-45a-8bit-aio\"\u003eGEPRC TAKER G4 45A AIO\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors: \u003ca href=\"\/products\/geprc-speedx2-1404-motor\"\u003eGEPRC SPEEDX2 1404\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003ePropeller covers (black + orange), 3x camera cover, aluminum battery holders, LED strip, 2x anti-slip battery pad, 2x LiPo straps\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"Default","offer_id":46432416464930,"sku":"GP107635","price":6299.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/6_DeMain_0000.jpg?v=1787739732"},{"product_id":"geprc-gep-mk5-o4-pro-frame","title":"GEPRC GEP-MK5 O4 Pro Frame","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC Mark5 (MK5) O4 Pro is a 5\" freestyle frame designed around the DJI O4 Air Unit Pro, offered in two layouts. The \u003cstrong\u003eDeadcat (DC)\u003c\/strong\u003e pushes the front arms out of the camera's view so props stay out of shot, ideal when recording up to 4K. The \u003cstrong\u003eWide X\u003c\/strong\u003e is the classic, balanced freestyle layout and the lighter of the two. Both use 5mm 3K carbon quick-release arms and a robust 7075 aluminium camera cage with the camera on silicone dampers to cut vibration.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/24905-1000_1000.jpg\" alt=\"GEPRC GEP-MK5 O4 Pro DC Frame\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_Main_0075-2.jpg\" alt=\"GEPRC GEP-MK5 O4 Pro Wide X Frame\"\u003e\n\u003ch3\u003eDeadcat or Wide X?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeadcat (DC)\u003c\/strong\u003e - props out of the camera view for clean cinematic and freestyle footage. Split front\/rear top plate and top-mounted XT60 for easy servicing. GEPRC codes GP107630 (green), GP107631 (orange).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide X\u003c\/strong\u003e - symmetrical wide-X freestyle layout, about 30g lighter, with two TPU action-camera mounts included. GEPRC codes GP107628 (green), GP107629 (orange).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003eDeadcat (DC)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWide X\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheelbase\u003c\/th\u003e\n\u003ctd\u003e230mm\u003c\/td\u003e\n\u003ctd\u003e225mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e197g ±10g\u003c\/td\u003e\n\u003ctd\u003e165.1g ±10g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm thickness\u003c\/th\u003e\n\u003ctd\u003e5mm\u003c\/td\u003e\n\u003ctd\u003e5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTop \/ bottom plate\u003c\/th\u003e\n\u003ctd\u003e2.5mm \/ 2.5mm\u003c\/td\u003e\n\u003ctd\u003e2.5mm \/ 2.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFC \/ stack mounting\u003c\/th\u003e\n\u003ctd\u003e30.5 x 30.5mm M3\u003c\/td\u003e\n\u003ctd\u003e30.5 x 30.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVTX mounting\u003c\/th\u003e\n\u003ctd\u003e20x20 \/ 25.5x25.5 \/ 30.5x30.5mm\u003c\/td\u003e\n\u003ctd\u003e20x20 \/ 25.5x25.5 \/ 30.5x30.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor mounting\u003c\/th\u003e\n\u003ctd\u003e16 \/ 19mm M3\u003c\/td\u003e\n\u003ctd\u003e16x16 \/ 19x19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCamera\u003c\/th\u003e\n\u003ctd\u003e20mm (DJI O4 Pro)\u003c\/td\u003e\n\u003ctd\u003e20mm (DJI O4 Pro)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProps\u003c\/th\u003e\n\u003ctd\u003e5 inch\u003c\/td\u003e\n\u003ctd\u003e5 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStack: 30.5 x 30.5mm only\u003c\/strong\u003e - 20x20 stacks and 25.5mm AIOs will not bolt on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for the DJI O4 Pro\u003c\/strong\u003e (20mm camera). 19-20mm analog cameras also fit the cage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotors:\u003c\/strong\u003e 16 or 19mm M3 - 2207 \/ 2306 class.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStacks (30.5): \u003ca href=\"\/products\/geprc-taker-f722-bt-32bit-50a-stack\"\u003eGEPRC TAKER F722 50A\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-f405-bls-60a-v2-stack\"\u003eGEPRC TAKER F405 BLS V2\u003c\/a\u003e, \u003ca href=\"\/products\/speedybee-f405-v5-ox32-55a-stack\"\u003eSpeedyBee F405 V5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors: \u003ca href=\"\/products\/geprc-speedx2-2207e-motor\"\u003eGEPRC SPEEDX2 2207E\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x GEP-MK5 O4 Pro frame (layout and colour as selected)\u003c\/li\u003e\n\u003cli\u003eBattery straps and 2x battery anti-slip pads\u003c\/li\u003e\n\u003cli\u003e3D-printed parts for the O4 camera and antenna\u003c\/li\u003e\n\u003cli\u003eScrew pack and small accessories\u003c\/li\u003e\n\u003cli\u003eWide X also includes: 1x 15 x 250mm heavy-duty strap, 2x 20 x 250mm rubber anti-slip straps, 3x L-shaped hex keys (1.5 \/ 2 \/ 3mm), 1x M8 wrench, 2x TPU action-camera mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"Deadcat \/ Green","offer_id":46432420888610,"sku":"AF-GEP-GEPMK5-O4-PRO-GRN","price":6499.0,"currency_code":"INR","in_stock":true},{"title":"Deadcat \/ Orange","offer_id":46432420921378,"sku":"AF-GEP-GEPMK5-O4-PRO-ORG","price":6499.0,"currency_code":"INR","in_stock":false},{"title":"Wide X \/ Green","offer_id":69443705077794,"sku":"AF-GEP-GEPMK5-O4-PRO-X-GRN","price":6499.0,"currency_code":"INR","in_stock":true},{"title":"Wide X \/ Orange","offer_id":69443705110562,"sku":"AF-GEP-GEPMK5-O4-PRO-X-ORG","price":6499.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/3_Main_0075.jpg?v=1787010870"},{"product_id":"geprc-gep-moz7-v2-frame","title":"GEPRC GEP-MOZ7 V2 Frame","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eGEPRC MOZ7 V2 is a high-quality frame for building long-range drones, supporting 7.5-8\" propellers for slightly more thrust than traditional 7\" setups. Plastic side panels protect the stack and electronics from debris. The camera is mounted in aluminum side plates tailored for DJI O4 Pro, positioned in front of the arms so propeller edges don't appear in the feed, enabling 4K recording directly from the unit.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_Main_0000-1_756e5d55-1688-4b46-a02d-1062b33ad248.jpg\" alt=\"GEPRC GEP-MOZ7 V2 Frame - detail\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/27936-1092_1092.jpg\" alt=\"GEPRC GEP-MOZ7 V2 Frame\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e376x303x35.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiagonal motor distance\u003c\/th\u003e\n\u003ctd\u003e336mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm thickness\u003c\/th\u003e\n\u003ctd\u003e6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStack mounting\u003c\/th\u003e\n\u003ctd\u003e20x20mm M3 \/ 25.5x25.5mm M2 \/ 30.5x30.5mm M3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVTX mounting\u003c\/th\u003e\n\u003ctd\u003e20x20 \/ 25.5x25.5mm M2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor mounting\u003c\/th\u003e\n\u003ctd\u003e16\/19mm M3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCamera\u003c\/th\u003e\n\u003ctd\u003eDJI O4 Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePropeller size\u003c\/th\u003e\n\u003ctd\u003e7.5-8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e270g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for the DJI O4 Pro\u003c\/strong\u003e - the aluminium side plates are sized for its camera.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStack:\u003c\/strong\u003e 20x20, 25.5x25.5 or 30.5x30.5mm - fits almost any stack or AIO.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProps:\u003c\/strong\u003e 7.5-8 inch. \u003cstrong\u003eMotors:\u003c\/strong\u003e 16\/19mm M3 - 2807-2810 class around 1150-1300KV on 6S.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMotors: \u003ca href=\"\/products\/rcinpower-aos-supernova-2810-motor\"\u003eRCinPower Supernova 2810\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-speedx2-2809-motor\"\u003eGEPRC SPEEDX2 2809\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-em2807-motor\"\u003eGEPRC EM2807\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eProps: \u003ca href=\"\/products\/gemfan-cinelifter-8040-3-propeller\"\u003eGemfan 8040-3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eStacks: \u003ca href=\"\/products\/geprc-taker-h743-bt-8bit-80a-stack\"\u003eGEPRC TAKER H743 80A\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-f405-bls-60a-v2-stack\"\u003eGEPRC TAKER F405 BLS V2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGPS: \u003ca href=\"\/products\/geprc-gep-m1025-series-gps-module\"\u003eGEPRC GEP-M1025-DQ\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1x Frame, 2x LiPo strip 20x250mm, 2x LiPo strip 20x300mm, 2x Silicone battery pad\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"Default","offer_id":46432421281826,"sku":"GP107754","price":11999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_Main_0000-1_1.jpg?v=1787739746"},{"product_id":"geprc-gep-ct35-frame","title":"GEPRC GEP-CT35 Frame","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eGEP-CT35 is a 3.5-inch FPV frame built for HD indoor and outdoor aerial filming, featuring a 6-point suspended vibration-damping independent VTX unit compatible with O4 Pro for smooth cinematic footage. High-toughness composite materials form a reinforced protective frame that absorbs impacts while staying compact. Bottom quick-release design for easy maintenance.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_Main_0000_3892dbc0-4a33-4690-b3af-9dc4aa2a4492.jpg\" alt=\"GEPRC GEP-CT35 Frame - detail\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_Main_0000-1200x1200_700x700_bf554ce7-7f22-4dd2-9f75-428c8276e81e.jpg\" alt=\"GEPRC GEP-CT35 Frame\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_Main_0000-1200x1200_700x700_e6540d97-275e-41a3-83ac-f0e0180082e4.jpg\" alt=\"GEPRC GEP-CT35 Frame\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWheelbase\u003c\/th\u003e\n\u003ctd\u003e167mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMain carbon plate\u003c\/th\u003e\n\u003ctd\u003e3.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBottom plate\u003c\/th\u003e\n\u003ctd\u003e1.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFC mounting\u003c\/th\u003e\n\u003ctd\u003e20x20mm \/ 25.5x25.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor mounting\u003c\/th\u003e\n\u003ctd\u003e12x12mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCamera mount width\u003c\/th\u003e\n\u003ctd\u003e20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower connector\u003c\/th\u003e\n\u003ctd\u003eXT60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible propellers\u003c\/th\u003e\n\u003ctd\u003e3.5-inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e201g ±5g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlight controller:\u003c\/strong\u003e 20x20 stack or 25.5mm AIO - not 30.5 x 30.5mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotors:\u003c\/strong\u003e 12x12mm mounts - 2004-2105 class (e.g. 2650KV on 4S\/6S).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProps:\u003c\/strong\u003e 3.5\" (90mm) ducted props - open freestyle props are the wrong shape for the guard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo:\u003c\/strong\u003e designed around the DJI O4 Pro (20mm camera) on a suspended VTX mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery lead:\u003c\/strong\u003e XT60.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAIO \/ stack: \u003ca href=\"\/products\/geprc-taker-f722-45a-32bit-aio\"\u003eGEPRC TAKER F722 45A AIO\u003c\/a\u003e, \u003ca href=\"\/products\/micoair743-v2-aio-am32\"\u003eMicoAir743 V2 AIO 45A\u003c\/a\u003e, \u003ca href=\"\/products\/speedybee-f405-mini-bls-35a-20x20-stack\"\u003eSpeedyBee F405 Mini (20x20)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors: \u003ca href=\"\/products\/geprc-speedx2-2105-5-motor\"\u003eGEPRC SPEEDX2 2105.5\u003c\/a\u003e, \u003ca href=\"\/products\/axisflying-c204-motor\"\u003eAxisflying C204\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eProps: \u003ca href=\"\/products\/gemfan-ducted-d90s-3-t-mount-propeller\"\u003eGemfan D90S-3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eProp guard, top plate, bottom plate, 2x battery straps, 4x anti-slip pads, function board, receiver + capacitor 3D mounts, acrylic plates, screw kit, aluminum + injection-molded parts, cable set\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"Default","offer_id":46432421707810,"sku":"AF-GEP-GEPCT35","price":9999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_Main_0000.jpg?v=1787739759"},{"product_id":"geprc-speedx2-2207e-motor","title":"GEPRC SPEEDX2 2207E Motor","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC SPEEDX2 2207E 1960KV is a 6S motor for 4–5\" freestyle and racing quads. A tight rotor-to-stator gap gives fast, precise response, and the CNC-machined 7075 aluminium bell is light, tough and cut away for cooling.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_Main_0000-6.jpg\" alt=\"GEPRC SPEEDX2 2207E Motor - 1960KV\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eTight rotor-stator gap for quick response\u003c\/li\u003e\n\u003cli\u003ePrecision CNC 7075 aluminium bell with cooling cut-outs\u003c\/li\u003e\n\u003cli\u003eN52H magnets, NMB\/NSK bearings, single-strand copper winding\u003c\/li\u003e\n\u003cli\u003eGlossy black finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_Main_0000-7.jpg\" alt=\"GEPRC SPEEDX2 2207E Motor - 1960KV\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/3_Main_0000-6.jpg\" alt=\"GEPRC SPEEDX2 2207E Motor - 1960KV\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eKV\u003c\/th\u003e\n\u003ctd\u003e1960\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003e12N14P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStator\u003c\/th\u003e\n\u003ctd\u003e2207\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShaft\u003c\/th\u003e\n\u003ctd\u003e5mm, 13.5mm long\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor dimensions\u003c\/th\u003e\n\u003ctd\u003e28 x 19.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e34.5g (with leads)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead wire\u003c\/th\u003e\n\u003ctd\u003e150mm, 20AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003e16 x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCells\u003c\/th\u003e\n\u003ctd\u003e6S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterphase resistance\u003c\/th\u003e\n\u003ctd\u003e69.85mΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePeak current\u003c\/th\u003e\n\u003ctd\u003e44.57A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax power\u003c\/th\u003e\n\u003ctd\u003e1104.7W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended props\u003c\/th\u003e\n\u003ctd\u003e4–5\" tri-blade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended ESC\u003c\/th\u003e\n\u003ctd\u003e50A, 6S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 6S. Too low-KV for strong 5\" flight on 4S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e 16 x 16mm - standard 5\" frames; not 19mm-only frames (HGLRC Nblade MAX).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESC:\u003c\/strong\u003e 50A 6S per motor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrames: \u003ca href=\"\/products\/geprc-gep-vapor-x5-o4-pro-frame\"\u003eGEPRC Vapor-X5 O4 Pro\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-gep-mk5-o4-pro-frame\"\u003eGEPRC MK5 O4 Pro DC\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-gep-vapor-d5-frame\"\u003eVapor-D5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eStacks: \u003ca href=\"\/products\/geprc-taker-f722-bt-32bit-50a-stack\"\u003eGEPRC TAKER F722 50A\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-f405-bls-60a-v2-stack\"\u003eTAKER F405 BLS V2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1x GEPRC SPEEDX2 2207E 1960KV motor\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"1960KV","offer_id":46435051405346,"sku":"AF-GEP-SPEEDX2-2207E-1960KV","price":1699.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1.0_Main_00004.jpg?v=1787865090"},{"product_id":"geprc-em3115-motor","title":"GEPRC EM3115 Motor","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC EM3115 900KV is a long-range FPV motor from GEPRC's EM series, built for 8–10\" props on 6S. A high-torque magnetic circuit and a strong M5 steel shaft make it a solid choice for heavy long-range and cinelifter builds.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_Main_0000-4.jpg\" alt=\"GEPRC EM3115 Motor - 900KV\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eDesigned for 8–10\" long-range FPV on 6S\u003c\/li\u003e\n\u003cli\u003eHigh-torque magnetic circuit, N52H magnets\u003c\/li\u003e\n\u003cli\u003eHigh-strength M5 steel shaft\u003c\/li\u003e\n\u003cli\u003eNSK\/NMB bearings, single-strand copper winding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_Main_0000-4.jpg\" alt=\"GEPRC EM3115 Motor - 900KV\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/3_Main_0000-4.jpg\" alt=\"GEPRC EM3115 Motor - 900KV\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eKV\u003c\/th\u003e\n\u003ctd\u003e900\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003e12N14P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShaft\u003c\/th\u003e\n\u003ctd\u003eø5mm, 16mm protrusion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor dimensions\u003c\/th\u003e\n\u003ctd\u003eø37.5 x 30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e115g (with leads)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead wire\u003c\/th\u003e\n\u003ctd\u003e310mm, 18AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003e19 x 19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCells\u003c\/th\u003e\n\u003ctd\u003e6S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterphase resistance\u003c\/th\u003e\n\u003ctd\u003e46mΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePeak current\u003c\/th\u003e\n\u003ctd\u003e65A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax power\u003c\/th\u003e\n\u003ctd\u003e1620W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended props\u003c\/th\u003e\n\u003ctd\u003e8–10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended ESC\u003c\/th\u003e\n\u003ctd\u003e60–80A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount: 19 x 19mm\u003c\/strong\u003e - not 16x16-only frames (HGLRC MY10, MY7).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESC: 60-80A\u003c\/strong\u003e per motor - peak draw is 65A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 6S. \u003cstrong\u003eProps:\u003c\/strong\u003e 8-10\".\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStacks: \u003ca href=\"\/products\/geprc-taker-h743-bt-8bit-80a-stack\"\u003eGEPRC TAKER H743 80A\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eProps: \u003ca href=\"\/products\/gemfan-cinelifter-1050-3-propeller\"\u003eGemfan 1050-3\u003c\/a\u003e, \u003ca href=\"\/products\/gemfan-cinelifter-8040-3-propeller\"\u003eGemfan 8040-3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x GEPRC EM3115 900KV motor\u003c\/li\u003e\n\u003cli\u003e4x M3x11 round-head screws\u003c\/li\u003e\n\u003cli\u003e1x M5 anti-slip nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"900KV","offer_id":46435051864098,"sku":"GP106124","price":2949.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/E9_A6_96_E5_9B_BE-3.jpg?v=1787865004"},{"product_id":"geprc-speedx2-2809-motor","title":"GEPRC SPEEDX2 2809 Motor","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC SPEEDX2 2809 1280KV is a 6S motor for 7–8\" long-range FPV drones and X8 builds. Its stator uses 0.2mm Kawasaki silicon steel laminations with N52SH magnets, and the rotor is CNC-machined from 7075-T6 aluminium with a reinforced edge to absorb impacts.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/SPEEDX2-2809-1280KV-Motor-1.jpg\" alt=\"GEPRC SPEEDX2 2809 Motor - 1280KV\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003e0.2mm Kawasaki silicon steel stator laminations\u003c\/li\u003e\n\u003cli\u003eN52SH arc magnets — around 30% better high-temperature resistance\u003c\/li\u003e\n\u003cli\u003e7075-T6 aluminium rotor with load-bearing, impact-resistant edge\u003c\/li\u003e\n\u003cli\u003eDark finish with red accents\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/SPEEDX2-2809-1280KV-Motor-2.jpg\" alt=\"GEPRC SPEEDX2 2809 Motor - 1280KV\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/SPEEDX2-2809-1280KV-Motor-3.jpg\" alt=\"GEPRC SPEEDX2 2809 Motor - 1280KV\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eKV\u003c\/th\u003e\n\u003ctd\u003e1280\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003e12N14P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStator\u003c\/th\u003e\n\u003ctd\u003e28 x 9mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShaft\u003c\/th\u003e\n\u003ctd\u003eø5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor dimensions\u003c\/th\u003e\n\u003ctd\u003eø36.04 x 36.53mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e71.4g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead wire\u003c\/th\u003e\n\u003ctd\u003e250mm, 18AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003e19 x 19mm, M3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCells\u003c\/th\u003e\n\u003ctd\u003e6S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax current\u003c\/th\u003e\n\u003ctd\u003e49.35A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax power\u003c\/th\u003e\n\u003ctd\u003e1148.9W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount: 19 x 19mm M3\u003c\/strong\u003e - not 16x16-only frames (HGLRC MY7, MY10).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProps:\u003c\/strong\u003e 7-8\". \u003cstrong\u003eBattery:\u003c\/strong\u003e 6S. \u003cstrong\u003eESC:\u003c\/strong\u003e 50A+ per motor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrames: \u003ca href=\"\/products\/geprc-mark4-7-frame\"\u003eGEPRC Mark4-7\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-gep-moz7-v2-frame\"\u003eGEPRC MOZ7 V2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eStacks: \u003ca href=\"\/products\/geprc-taker-f405-bls-60a-v2-stack\"\u003eGEPRC TAKER F405 BLS V2 (65A)\u003c\/a\u003e, \u003ca href=\"\/products\/t-motor-velox-v70a-esc-f7-fc-se-6-8s-4in1-freestyle-stack\"\u003eT-Motor Velox V70A\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eProps: \u003ca href=\"\/products\/gemfan-flash-7040-3-propeller\"\u003eGemfan Flash 7040-3\u003c\/a\u003e, \u003ca href=\"\/products\/gemfan-cinelifter-8040-3-propeller\"\u003eGemfan 8040-3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x GEPRC SPEEDX2 2809 1280KV motor\u003c\/li\u003e\n\u003cli\u003e4x M3x9 round-head screws\u003c\/li\u003e\n\u003cli\u003e1x M5 anti-slip nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"1280KV","offer_id":46435054321698,"sku":"GP105980","price":2949.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/SPEEDX2-2809-1280KV-Motor-4.jpg?v=1787865105"},{"product_id":"geprc-em4214-motor","title":"GEPRC EM4214 Motor","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC EM4214 660KV is a large long-range FPV motor from GEPRC's EM series, designed for 12–14\" props on 6S. Its high-torque magnetic circuit and 6mm steel shaft handle big props on heavy long-range and X-class style platforms.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_Main_0000-1_a50c24c3-5578-4d06-b9f8-e0d0fd723f37.jpg\" alt=\"GEPRC EM4214 Motor - 660KV\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eDesigned for 12–14\" props on 6S\u003c\/li\u003e\n\u003cli\u003eHigh-torque magnetic circuit, N52H magnets, NMB bearings\u003c\/li\u003e\n\u003cli\u003eHigh-strength 6mm steel shaft\u003c\/li\u003e\n\u003cli\u003eLong 800mm 14AWG leads for large frames\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_Main_0000-1.jpg\" alt=\"GEPRC EM4214 Motor - 660KV\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/3_Main_0000-1.jpg\" alt=\"GEPRC EM4214 Motor - 660KV\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eKV\u003c\/th\u003e\n\u003ctd\u003e660\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003e12N14P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShaft\u003c\/th\u003e\n\u003ctd\u003eø6mm, 25.5mm protrusion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor dimensions\u003c\/th\u003e\n\u003ctd\u003eø49 x 32.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e246g (with leads)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead wire\u003c\/th\u003e\n\u003ctd\u003e800mm, 14AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003e30 x 30mm, M4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCells\u003c\/th\u003e\n\u003ctd\u003e6S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterphase resistance\u003c\/th\u003e\n\u003ctd\u003e25mΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePeak current\u003c\/th\u003e\n\u003ctd\u003e90A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax power\u003c\/th\u003e\n\u003ctd\u003e2120W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended props\u003c\/th\u003e\n\u003ctd\u003e12–14\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended ESC\u003c\/th\u003e\n\u003ctd\u003e80–100A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eESC: 80-100A per motor\u003c\/strong\u003e - peak draw is 90A. Standard 5\" stacks are far too small.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e 30 x 30mm M4 - large heavy-lift frames only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 6S. \u003cstrong\u003eProps:\u003c\/strong\u003e 12-14\" on the 6mm shaft (M6 nut).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eESC: \u003ca href=\"\/products\/geprc-taker-s100-8s-bls-100a-esc\"\u003eGEPRC TAKER S100 100A\u003c\/a\u003e, \u003ca href=\"\/products\/sequre-h743-v2-e130-g2-stack\"\u003eSEQURE H743 V2 \u0026amp; E130 G2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eProps: \u003ca href=\"\/products\/hqprop-13x8x3-propeller\"\u003eHQProp 13x8x3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x GEPRC EM4214 660KV motor\u003c\/li\u003e\n\u003cli\u003e4x M4 screws\u003c\/li\u003e\n\u003cli\u003e1x M6 nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"660KV","offer_id":46435055042594,"sku":"GP107275","price":5199.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1-1_a8a66569-5974-4b0b-aa63-ecfae67abb30.jpg?v=1787864972"},{"product_id":"geprc-speedx2-2105-5-motor","title":"GEPRC SPEEDX2 2105.5 Motor","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC SPEEDX2 2105.5 2650KV is a flat, high-torque motor for 3–4\" whoops and 4–5\" toothpicks or light long-range quads. At 21g it delivers quick throttle response, and the hollowed-out rotor top helps it run cooler.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1-6_32ec8b70-b0c1-4f0f-bb26-ad91a7b467c8.jpg\" alt=\"GEPRC SPEEDX2 2105.5 Motor - 2650KV\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eFlat 21 x 5.5mm stator for torque and fast response\u003c\/li\u003e\n\u003cli\u003eN52H arc magnets\u003c\/li\u003e\n\u003cli\u003eHollowed rotor top for better cooling\u003c\/li\u003e\n\u003cli\u003e1.5mm output shaft fits common 3–5\" props\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2-5.jpg\" alt=\"GEPRC SPEEDX2 2105.5 Motor - 2650KV\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/3-5.jpg\" alt=\"GEPRC SPEEDX2 2105.5 Motor - 2650KV\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eKV\u003c\/th\u003e\n\u003ctd\u003e2650\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003e12N14P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStator\u003c\/th\u003e\n\u003ctd\u003e21 x 5.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShaft\u003c\/th\u003e\n\u003ctd\u003eø3mm inside, ø1.5mm output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor dimensions\u003c\/th\u003e\n\u003ctd\u003eø25.65 x 15.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e21g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead wire\u003c\/th\u003e\n\u003ctd\u003e150mm, 22AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003e12 x 12mm, M2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCells\u003c\/th\u003e\n\u003ctd\u003e3–6S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax current (5S)\u003c\/th\u003e\n\u003ctd\u003e34.9A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous power\u003c\/th\u003e\n\u003ctd\u003e559W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount: 12 x 12mm M2\u003c\/strong\u003e - 3.5\" cinewhoops and 4\" frames. Not 16x16 M3 5\" frames.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft 1.5mm output\u003c\/strong\u003e - props with a T-mount or 1.5mm hub, not M5 5\" props.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESC:\u003c\/strong\u003e 35A+ per motor (45A AIO is ideal).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrames: \u003ca href=\"\/products\/geprc-gep-ct35-frame\"\u003eGEPRC CT35\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-gep-cl35-v3-frame\"\u003eGEPRC CL35 V3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAIO: \u003ca href=\"\/products\/geprc-taker-f722-45a-32bit-aio\"\u003eGEPRC TAKER F722 45A\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-g4-45a-8bit-aio\"\u003eTAKER G4 45A\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eProps: \u003ca href=\"\/products\/gemfan-ducted-d90s-3-t-mount-propeller\"\u003eGemfan D90S-3 T-Mount\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x GEPRC SPEEDX2 2105.5 2650KV motor\u003c\/li\u003e\n\u003cli\u003e5x M2x6mm and 5x M2x7mm screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"2650KV","offer_id":46435055075362,"sku":"AF-GEP-SPEEDX2-2105.5-2650KV","price":2299.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/6-5.jpg?v=1787865115"},{"product_id":"geprc-taker-f722-bt-32bit-50a-stack","title":"GEPRC TAKER F722 BT 32Bit 50A Stack","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC TAKER F722 BT 32Bit 50A Stack pairs the GEP-F722-BT-HD V3 flight controller with the GEP-BL32 50A 96K 4-in-1 ESC on a standard 30.5x30.5mm footprint for 3-6S freestyle builds. The FC has an STM32F722, ICM42688-P gyro, barometer, 512M blackbox and an integrated LC power filter, and plugs straight into a DJI Air Unit.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/3_Main_0000-1-600x600.jpg\" alt=\"GEPRC TAKER F722 BT 32Bit 50A STACK\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eSTM32F722 with ICM42688-P gyro and barometer\u003c\/li\u003e\n\u003cli\u003e512M onboard blackbox\u003c\/li\u003e\n\u003cli\u003eIntegrated LC power filter and dual independent BEC\u003c\/li\u003e\n\u003cli\u003eDirect plug-in for DJI Air Units (O3 3-in-1 cable included)\u003c\/li\u003e\n\u003cli\u003eBLHeli_32 50A ESC with 96K PWM, current sensing and telemetry\u003c\/li\u003e\n\u003cli\u003eSoft-mounted FC for a cleaner gyro signal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_Main_0000-1_0e6084be-44c9-4d0b-8dc1-a3dc6d8315bf.jpg\" alt=\"GEPRC TAKER F722 BT 32Bit 50A Stack\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/4_Main_0000-1_07037731-f9eb-41aa-aa91-26d632fb5292.jpg\" alt=\"GEPRC TAKER F722 BT 32Bit 50A Stack\"\u003e\u003ch3\u003eFlight controller (GEP-F722-BT-HD V3)\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMCU\u003c\/th\u003e\n\u003ctd\u003eSTM32F722\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGyro\u003c\/th\u003e\n\u003ctd\u003eICM42688-P (SPI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlackbox\u003c\/th\u003e\n\u003ctd\u003e512M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOSD\u003c\/th\u003e\n\u003ctd\u003eBetaflight OSD (AT7456E)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBEC\u003c\/th\u003e\n\u003ctd\u003e5V 3A and 9V 2.5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUARTs\u003c\/th\u003e\n\u003ctd\u003e5 (UART4 reserved for Bluetooth)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUSB\u003c\/th\u003e\n\u003ctd\u003eType-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFirmware target\u003c\/th\u003e\n\u003ctd\u003eGEPRCF722_BT_HD_V3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003e3-6S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e36.9 x 36.9mm; mounting 30.5 x 30.5mm (4mm holes, 3mm with grommets)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e8.2g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eESC (GEP-BL32 50A 96K 4IN1)\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003e3-6S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent\u003c\/th\u003e\n\u003ctd\u003e50A continuous, 55A burst (5 s)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent sensor and telemetry\u003c\/th\u003e\n\u003ctd\u003esupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtocols\u003c\/th\u003e\n\u003ctd\u003eDShot150\/300\/600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTarget\u003c\/th\u003e\n\u003ctd\u003eST_G0_05 – 31.92\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e42.5 x 42.1mm; mounting 30.5 x 30.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e14g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e 30.5 x 30.5mm stack mount - 5\" freestyle frames. Will not fit 20x20 or 25.5mm whoop \/ micro mounts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 3-6S. Suits 5\" builds on 2207-class motors (around 1800-2000KV on 6S, 2400-2700KV on 4S).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo:\u003c\/strong\u003e analog (Betaflight OSD) or HD - DJI O3 \/ O4 Pro plug straight in with the included cable; the 9V BEC powers the air unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceiver:\u003c\/strong\u003e no receiver on board - add a UART receiver such as ELRS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrames: \u003ca href=\"\/products\/geprc-gep-vapor-x5-o4-pro-frame\"\u003eGEP-Vapor-X5 O4 Pro\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-gep-mk5-o4-pro-frame\"\u003eGEP-MK5 O4 Pro DC\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors: \u003ca href=\"\/products\/geprc-speedx2-2207e-motor\"\u003eGEPRC SPEEDX2 2207E 1960KV\u003c\/a\u003e, \u003ca href=\"\/products\/iflight-xing2-2207-motor\"\u003eiFlight XING2 2207\u003c\/a\u003e, \u003ca href=\"\/products\/t-motor-velox-v3-2207-motor\"\u003eT-Motor Velox V3 2207\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalog: \u003ca href=\"\/products\/tbs-unify-pro32-hv-mmcx\"\u003eTBS Unify Pro32 HV\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eReceiver \/ GPS: \u003ca href=\"\/products\/geprc-gep-m10-series-gps-module\"\u003eGEPRC GEP-M10-DQ GPS\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x flight controller, 1x ESC\u003c\/li\u003e\n\u003cli\u003e1x capacitor\u003c\/li\u003e\n\u003cli\u003e1x O3 3-in-1 cable, 1x FC adapter cable, 1x SH1.0 4-pin silicone cable\u003c\/li\u003e\n\u003cli\u003e1x camera cable, 1x VTX cable\u003c\/li\u003e\n\u003cli\u003e1x XT60 power lead\u003c\/li\u003e\n\u003cli\u003e4x M3x30 and 4x M3x25 screws, 8x nylon nuts\u003c\/li\u003e\n\u003cli\u003e12x silicone anti-vibration grommets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eGEPRC notice (Feb 2026): the current production batch does not support Bluetooth parameter tuning due to a temporary hardware change; GEPRC says flight performance is unaffected.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"Default Title","offer_id":46435850420258,"sku":"GP107542","price":8999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_Main_0000-1-600x600.jpg?v=1787066977"},{"product_id":"geprc-taker-h743-bt-8bit-80a-stack","title":"GEPRC TAKER H743 BT 8Bit 80A Stack","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC TAKER H743 BT 8Bit 80A Stack pairs a fast STM32H743 flight controller with an 80A 4-in-1 ESC for heavy-lift and long-range builds. It runs Betaflight, INAV and ArduPilot, has dual gyros, a barometer and 512MB blackbox, and supports eight motor outputs for X8 builds. Everything plugs in — no soldering needed for the DJI air unit.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_DeMain_0000-600x600.jpg\" alt=\"GEPRC TAKER H743 BT 8Bit 80A STACK\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eSTM32H743 (Cortex-M7, 480MHz)\u003c\/li\u003e\n\u003cli\u003eDual gyro: MPU6000 + ICM42688-P\u003c\/li\u003e\n\u003cli\u003e512MB onboard blackbox and barometer\u003c\/li\u003e\n\u003cli\u003eEight motor outputs (X8 compatible)\u003c\/li\u003e\n\u003cli\u003eDual independent BEC: 5V 3A and 12V 2.5A\u003c\/li\u003e\n\u003cli\u003eDirect-plug DJI air unit connection, integrated LC filter, Type-C USB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/3_DeMain_0000.jpg\" alt=\"GEPRC TAKER H743 BT 8Bit 80A Stack\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/4_DeMain_0000.jpg\" alt=\"GEPRC TAKER H743 BT 8Bit 80A Stack\"\u003e\u003ch3\u003eFlight controller (TAKER H743 BT)\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMCU\u003c\/th\u003e\n\u003ctd\u003eSTM32H743\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGyro\u003c\/th\u003e\n\u003ctd\u003eMPU6000 + ICM42688-P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOSD\u003c\/th\u003e\n\u003ctd\u003eBetaflight OSD (AT7456E)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUARTs\u003c\/th\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003e3–6S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003e30.5 x 30.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e38.5 x 38.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e8.4g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFirmware target\u003c\/th\u003e\n\u003ctd\u003eGEPRC_TAKER_H743\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eESC (TAKER H80_BLS 80A 4-in-1)\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eContinuous \/ burst current\u003c\/th\u003e\n\u003ctd\u003e80A \/ 85A (5s)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003e3–6S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtocols\u003c\/th\u003e\n\u003ctd\u003eDShot150\/300\/600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent sensor\u003c\/th\u003e\n\u003ctd\u003eyes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003e30.5 x 30.5mm (M4, M3 with grommets)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e56.3 x 61.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e28.1g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFirmware target\u003c\/th\u003e\n\u003ctd\u003eB_X_30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame clearance:\u003c\/strong\u003e the ESC board is 56.3 x 61.1mm - much larger than a standard 30.5 stack. It suits 7-13\" long-range and heavy-lift frames; check it fits inside your frame before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 3-6S. XT90 lead and 4700µF capacitor included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e Betaflight, INAV or ArduPilot - good for GPS \/ autonomous builds. 8 motor outputs for X8.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo:\u003c\/strong\u003e DJI O3 \/ O4 Pro plug-in (12V BEC) or analog.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrames: \u003ca href=\"\/products\/geprc-mark4-7-frame\"\u003eGEPRC Mark4-7\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-gep-moz7-v2-frame\"\u003eGEP-MOZ7 V2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors: \u003ca href=\"\/products\/geprc-speedx2-2809-motor\"\u003eGEPRC SPEEDX2 2809\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-em3115-motor\"\u003eGEPRC EM3115 900KV\u003c\/a\u003e, \u003ca href=\"\/products\/rcinpower-aos-supernova-2810-motor\"\u003eRCinPower Supernova 2810\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGPS: \u003ca href=\"\/products\/geprc-gep-m1025-series-gps-module\"\u003eGEPRC GEP-M1025-DQ\u003c\/a\u003e, \u003ca href=\"\/products\/micoair-mg-f10-l1-l5-dual-band-gnss-module\"\u003eMicoAir MG-F10\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eNote: GEPRC states that Bluetooth parameter tuning is not available on the current production batch.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x TAKER H743 BT flight controller\u003c\/li\u003e\n\u003cli\u003e1x TAKER H80_BLS 80A 4-in-1 ESC\u003c\/li\u003e\n\u003cli\u003e1x 50V 4700µF capacitor\u003c\/li\u003e\n\u003cli\u003eDJI, receiver, camera, VTX and FC adapter cables\u003c\/li\u003e\n\u003cli\u003e1x XT90 power lead (10AWG)\u003c\/li\u003e\n\u003cli\u003eMounting screws, nylon nuts and silicone grommets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"Default Title","offer_id":46435850616866,"sku":"AF-GEP-TAKER-H743-BT-8BIT-80A","price":14999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_DeMain_0000-600x600.jpg?v=1787066988"},{"product_id":"geprc-taker-f722-bt-8bit-60a-stack","title":"GEPRC TAKER F722 BT 8Bit 60A Stack","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC TAKER F722 BT 8Bit 60A Stack combines an F722 flight controller with a 60A 4-in-1 ESC for 3–6S 5\" builds. It has an ICM42688-P gyro, barometer and 512MB blackbox, and plugs straight into a DJI air unit.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_Main_0000-3-600x600.jpg\" alt=\"GEPRC TAKER F722 BT 8Bit 60A STACK\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eSTM32F722 MCU with ICM42688-P gyro\u003c\/li\u003e\n\u003cli\u003e512MB onboard blackbox and barometer\u003c\/li\u003e\n\u003cli\u003eDual independent BEC\u003c\/li\u003e\n\u003cli\u003eDirect-plug DJI air unit connection, integrated LC filter, Type-C USB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/3_Main_0000-3_85941fd3-5cc5-41ab-a1fd-bed7a1058de2.jpg\" alt=\"GEPRC TAKER F722 BT 8Bit 60A Stack\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/4_Main_0000-3.jpg\" alt=\"GEPRC TAKER F722 BT 8Bit 60A Stack\"\u003e\u003ch3\u003eFlight controller (GEP-F722-BT-HD V3)\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMCU\u003c\/th\u003e\n\u003ctd\u003eSTM32F722\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGyro\u003c\/th\u003e\n\u003ctd\u003eICM42688-P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOSD\u003c\/th\u003e\n\u003ctd\u003eBetaflight OSD (AT7456E)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUARTs\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003e3–6S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003e30.5 x 30.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e36.9 x 36.9mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e8.2g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFirmware target\u003c\/th\u003e\n\u003ctd\u003eGEPRCF722_BT_HD_V3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eESC (TAKER H60_BLS 60A 4-in-1)\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eContinuous \/ burst current\u003c\/th\u003e\n\u003ctd\u003e60A \/ 65A (5s)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003e3–6S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtocols\u003c\/th\u003e\n\u003ctd\u003eDShot150\/300\/600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent sensor\u003c\/th\u003e\n\u003ctd\u003eyes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003e30.5 x 30.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e42 x 45.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e14.9g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e 30.5 x 30.5mm stack - 5\"-7\" frames.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 3-6S; XT90 lead included (swap to XT60 if your packs use it).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESC firmware:\u003c\/strong\u003e 8-bit BLHeli_S - choose the \u003ca href=\"\/products\/geprc-taker-f722-bt-32bit-50a-stack\"\u003e32-bit 50A version\u003c\/a\u003e if you want BLHeli_32 and higher PWM frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo:\u003c\/strong\u003e DJI O3 \/ O4 Pro plug-in or analog. \u003cstrong\u003eReceiver:\u003c\/strong\u003e not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrames: \u003ca href=\"\/products\/geprc-gep-mk5-o4-pro-frame\"\u003eGEP-MK5 O4 Pro DC\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-gep-vapor-d5-frame\"\u003eGEP-Vapor-D5\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-mark4-7-frame\"\u003eMark4-7\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors: \u003ca href=\"\/products\/geprc-speedx2-2207e-motor\"\u003eGEPRC SPEEDX2 2207E\u003c\/a\u003e, \u003ca href=\"\/products\/rcinpower-aos-supernova-2207-motor\"\u003eRCinPower Supernova 2207\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eReceiver: \u003ca href=\"\/products\/radiomaster-rp2-v2-expresslrs-2-4ghz-nano-receiver\"\u003eRadioMaster RP2 V2\u003c\/a\u003e; GPS: \u003ca href=\"\/products\/geprc-gep-m10-series-gps-module\"\u003eGEP-M10-DQ\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eNote: GEPRC states that Bluetooth parameter tuning is not available on the current production batch.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x flight controller and 1x 60A 4-in-1 ESC\u003c\/li\u003e\n\u003cli\u003e1x capacitor\u003c\/li\u003e\n\u003cli\u003eDJI O3 cable, FC adapter, receiver, camera and VTX cables\u003c\/li\u003e\n\u003cli\u003e1x XT90 power lead\u003c\/li\u003e\n\u003cli\u003eMounting screws, nylon nuts and silicone grommets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"Default Title","offer_id":46435851141154,"sku":"GP107549","price":8449.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_Main_0000-3-600x600.jpg?v=1787066998"},{"product_id":"geprc-taker-f405-bls-60a-v2-stack","title":"GEPRC TAKER F405 BLS 60A V2 Stack","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC TAKER F405 BLS 60A V2 Stack pairs the GEP-F405-HD V3 flight controller with the TAKER H60_BLS 60A 4-in-1 ESC. It is a plug-and-play 30.5mm stack for 3–6S freestyle builds, with a direct plug for the DJI air unit so HD setups need no soldering.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/9_DeMain_0000-1.jpg\" alt=\"GEPRC TAKER F405 BLS 60A V2 Stack\"\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eMainstream STM32F405 processor with the ICM42688-P gyro\u003c\/li\u003e\n\u003cli\u003e16MB onboard blackbox for flight logs\u003c\/li\u003e\n\u003cli\u003eIntegrated LC power filter\u003c\/li\u003e\n\u003cli\u003eType-C USB port\u003c\/li\u003e\n\u003cli\u003ePlugs straight into a DJI air unit — no soldering for HD video\u003c\/li\u003e\n\u003cli\u003eDual independent BEC: 12V @ 2.5A and 5V @ 3A\u003c\/li\u003e\n\u003cli\u003eTAKER H60_BLS 60A 4-in-1 ESC (BLHeli_S) for smooth motor response\u003c\/li\u003e\n\u003cli\u003eSilicone shock-absorbing mounts keep the gyro stable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFlight controller (GEP-F405-HD V3)\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMCU\u003c\/th\u003e\n\u003ctd\u003eSTM32F405\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGyro (IMU)\u003c\/th\u003e\n\u003ctd\u003eICM42688-P (SPI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBarometer\u003c\/th\u003e\n\u003ctd\u003eBMP280\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlackbox\u003c\/th\u003e\n\u003ctd\u003e16MB onboard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOSD\u003c\/th\u003e\n\u003ctd\u003eBetaflight OSD (AT7456E chip)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUARTs\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor outputs\u003c\/th\u003e\n\u003ctd\u003eM1–M6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBEC\u003c\/th\u003e\n\u003ctd\u003e5V @ 3A + 12V @ 2.5A, dual independent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower filter\u003c\/th\u003e\n\u003ctd\u003eIntegrated LC filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUSB\u003c\/th\u003e\n\u003ctd\u003eType-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAir unit\u003c\/th\u003e\n\u003ctd\u003eDirect plug-in for DJI air unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e3–6S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e37.15 x 37.15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003e30.5 x 30.5mm (4mm holes, 3mm with silicone grommets)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e7.3g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFirmware target\u003c\/th\u003e\n\u003ctd\u003eGEPRCF405\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eESC (TAKER H60_BLS 60A 4-in-1)\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eContinuous \/ burst\u003c\/th\u003e\n\u003ctd\u003e60A \/ 65A (5 seconds)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e3–6S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFirmware\u003c\/th\u003e\n\u003ctd\u003eBLHeli_S, target B_X_30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtocols\u003c\/th\u003e\n\u003ctd\u003eDShot150 \/ DShot300 \/ DShot600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent sensor\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e42 x 45.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003e30.5 x 30.5mm (4mm holes, 3mm with silicone grommets)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e14.9g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 3–6S LiPo. XT60 power lead included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e 5\" freestyle builds. For heavier 5–7\" builds see the \u003ca href=\"\/products\/geprc-taker-f405-bls-65a-v2-stack\"\u003e65A V2 Stack\u003c\/a\u003e; for 7\" and up see the \u003ca href=\"\/products\/geprc-taker-f405-bls-80a-v2-stack\"\u003e80A V2 Stack\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e 30.5 x 30.5mm stack mount. Stack weight about 22.2g (FC 7.3g + ESC 14.9g).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo:\u003c\/strong\u003e DJI air unit plug-in or analog VTX. \u003cstrong\u003eReceiver:\u003c\/strong\u003e not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrames: \u003ca href=\"\/products\/geprc-gep-mk5-o4-pro-frame\"\u003eGEP-MK5 O4 Pro DC\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors: \u003ca href=\"\/products\/geprc-speedx2-2207e-motor\"\u003eGEPRC SPEEDX2 2207E\u003c\/a\u003e, \u003ca href=\"\/products\/iflight-xing2-2207-motor\"\u003eiFlight XING2 2207\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGPS: \u003ca href=\"\/products\/geprc-gep-m10-series-gps-module\"\u003eGEP-M10-DQ\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eVideo: \u003ca href=\"\/products\/hglrc-zeus-800mw-smart-mounting-vtx\"\u003eHGLRC Zeus 800mW (analog)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x GEP-F405-HD V3 flight controller\u003c\/li\u003e\n\u003cli\u003e1x TAKER H60_BLS 60A 4-in-1 ESC\u003c\/li\u003e\n\u003cli\u003e1x capacitor\u003c\/li\u003e\n\u003cli\u003e1x DJI air unit adapter cable\u003c\/li\u003e\n\u003cli\u003e1x flight controller adapter cable\u003c\/li\u003e\n\u003cli\u003e1x XT60 power cable\u003c\/li\u003e\n\u003cli\u003e4x M3x30 screws and 4x M3x25 screws\u003c\/li\u003e\n\u003cli\u003e8x nylon nuts and 8x silicone grommets\u003c\/li\u003e\n\u003cli\u003e2x SH1.0 4-pin silicone cables\u003c\/li\u003e\n\u003cli\u003e1x camera connection cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1-1_b1fd5297-4acc-41d1-9c49-89f84921c08b.jpg\" alt=\"GEPRC TAKER F405 BLS 60A V2 Stack - product details 1\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2-3.jpg\" alt=\"GEPRC TAKER F405 BLS 60A V2 Stack - product details 2\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/3-7_1a94fe33-f423-4083-ae30-23dd750ee160.jpg\" alt=\"GEPRC TAKER F405 BLS 60A V2 Stack - product details 3\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/4-1_b4c32781-8ce9-4f33-8ff6-18e1cecd6ad2.jpg\" alt=\"GEPRC TAKER F405 BLS 60A V2 Stack - product details 4\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/5-1_0f63a449-3872-4cad-a883-552929ba5287.jpg\" alt=\"GEPRC TAKER F405 BLS 60A V2 Stack - product details 5\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/6-1.jpg\" alt=\"GEPRC TAKER F405 BLS 60A V2 Stack - product details 6\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/7-1.jpg\" alt=\"GEPRC TAKER F405 BLS 60A V2 Stack - product details 7\"\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"60A","offer_id":46435851173922,"sku":"AF-GEP-TAKER-F405-BLS-V2-60A","price":7399.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/9_DeMain_0000-1.jpg?v=1793054881"},{"product_id":"geprc-taker-f722-45a-32bit-aio","title":"GEPRC TAKER F722 45A 32Bit AIO","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC TAKER F722 45A 32Bit AIO combines an STM32F722 flight controller and a 45A 32-bit 4-in-1 ESC on one 25.5x25.5mm board for 2-6S builds. A 6-pin port on the underside takes an HD VTX by direct plug, and the 32-bit ESC firmware gives smooth throttle response.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_Main_0001-1-600x600.jpg\" alt=\"GEPRC TAKER F722 45A 32Bit AIO\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003e2-6S input, 45A continuous \/ 55A burst (10 s)\u003c\/li\u003e\n\u003cli\u003eSTM32F722 with ICM-42688-P gyro\u003c\/li\u003e\n\u003cli\u003e16MB onboard blackbox\u003c\/li\u003e\n\u003cli\u003e6-pin bottom port for plug-in HD VTX, no soldering\u003c\/li\u003e\n\u003cli\u003e5 full UARTs, buzzer and LED support, OSD tuning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/3_Main_0001-1.jpg\" alt=\"GEPRC TAKER F722 45A 32Bit AIO\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/4_Main_0001-1.jpg\" alt=\"GEPRC TAKER F722 45A 32Bit AIO\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMCU\u003c\/th\u003e\n\u003ctd\u003eSTM32F722\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGyro\u003c\/th\u003e\n\u003ctd\u003eICM-42688-P (SPI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFirmware target\u003c\/th\u003e\n\u003ctd\u003eGEPRC_F722_AIO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlackbox\u003c\/th\u003e\n\u003ctd\u003e16MB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOSD\u003c\/th\u003e\n\u003ctd\u003eBetaflight OSD (AT7456E)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUARTs\u003c\/th\u003e\n\u003ctd\u003eR1\/T1 to R5\/T5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUSB\u003c\/th\u003e\n\u003ctd\u003eType-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBEC\u003c\/th\u003e\n\u003ctd\u003e5V 1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eESC\u003c\/th\u003e\n\u003ctd\u003e32-bit, 45A continuous, 55A burst\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtocols\u003c\/th\u003e\n\u003ctd\u003eDShot600, OneShot, MultiShot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003e2-6S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e35 x 33.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003e25.5 x 25.5mm (M3, reduced to M2 with dampers)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e9.2g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e 25.5 x 25.5mm AIO mount - 2.5-3.5\" cinewhoops and micro freestyle frames. It will not bolt onto 20x20 or 30.5x30.5 stack holes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBEC is only 5V 1A.\u003c\/strong\u003e A DJI O4 \/ O4 Pro needs 9-12V - power it from VBAT (if the air unit accepts pack voltage) or a separate BEC such as the \u003ca href=\"\/products\/iflight-blitz-bec-module-v1-1\"\u003eiFlight BLITZ BEC\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 2-6S, XT30 lead included. \u003cstrong\u003eReceiver:\u003c\/strong\u003e not built in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrames: \u003ca href=\"\/products\/geprc-gep-cl30-v3-frame\"\u003eGEPRC CL30 V3\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-gep-cl35-v3-frame\"\u003eGEPRC CL35 V3\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-gep-ct35-frame\"\u003eGEPRC CT35\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors: \u003ca href=\"\/products\/geprc-speedx2-1404-motor\"\u003eGEPRC SPEEDX2 1404\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-speedx2-2105-5-motor\"\u003eSPEEDX2 2105.5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eExtra BEC for HD: \u003ca href=\"\/products\/iflight-blitz-bec-module-v1-1\"\u003eiFlight BLITZ BEC V1.1\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x TAKER F722 45A AIO\u003c\/li\u003e\n\u003cli\u003e1x XT30 18AWG power lead (7cm)\u003c\/li\u003e\n\u003cli\u003e1x 35V 220µF capacitor\u003c\/li\u003e\n\u003cli\u003e1x SH1.0 6-pin to GH1.25 8-pin adapter cable\u003c\/li\u003e\n\u003cli\u003e1x SH1.0 6-pin cable\u003c\/li\u003e\n\u003cli\u003e8x M2 x 6.5mm damping grommets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"Default Title","offer_id":46435851370530,"sku":"AF-GEP-TAKER-F722-45A-32BIT","price":8599.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_Main_0001-1-600x600.jpg?v=1787067015"},{"product_id":"geprc-taker-s100-8s-bls-100a-esc","title":"GEPRC TAKER S100 8S BLS 100A ESC","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC TAKER S100 8S BLS 100A is a single high-current ESC for large multirotors, X-class builds and heavy-lift platforms running 3–8S. This is the case version: the ESC comes with a moulded, ventilated PC case that protects it while helping it shed heat.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/22-600x600.jpg\" alt=\"GEPRC TAKER S100 8S BLS 100A ESC (With Case Version)\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003e100A continuous on 3–8S\u003c\/li\u003e\n\u003cli\u003eBuilt-in MOSFET heatsink for high-current cooling\u003c\/li\u003e\n\u003cli\u003eBLHeli_S and Bluejay firmware support\u003c\/li\u003e\n\u003cli\u003eMoulded, ventilated top and bottom case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/32-600x600.jpg\" alt=\"GEPRC TAKER S100 8S BLS 100A ESC (With Case Version)\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003e3–8S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eContinuous \/ burst current\u003c\/th\u003e\n\u003ctd\u003e100A \/ 105A (5s)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtocols\u003c\/th\u003e\n\u003ctd\u003eDShot150\/300\/600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFirmware\u003c\/th\u003e\n\u003ctd\u003eBLHeli_S \/ Bluejay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent sensor\u003c\/th\u003e\n\u003ctd\u003enot supported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eESC size\u003c\/th\u003e\n\u003ctd\u003e32.5 x 55mm; mounting holes 29.6 x 48.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCase size\u003c\/th\u003e\n\u003ctd\u003e36 x 76mm (PC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e73.2g with case (13.7g bare)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle ESC\u003c\/strong\u003e - one per motor, not a 4-in-1. For a quad you need four (or six for a hex), plus a power distribution board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot a stack board:\u003c\/strong\u003e mounting is 29.6 x 48.5mm, not 30.5 x 30.5mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo current sensor\u003c\/strong\u003e - add one on the PDB if you need current telemetry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e case, board and wires ship separately and need soldering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotors:\u003c\/strong\u003e large 3115 \/ 4214 \/ 5215-class motors on 6-8S.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower distribution: \u003ca href=\"\/products\/geprc-pdb-hexacopter-power-distribution-board\"\u003eGEPRC PDB Hexacopter\u003c\/a\u003e, \u003ca href=\"\/products\/tbs-lucid-pdb-500a\"\u003eTBS Lucid PDB 500A\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors: \u003ca href=\"\/products\/geprc-em4214-motor-660kv\"\u003eGEPRC EM4214 660KV\u003c\/a\u003e, \u003ca href=\"\/products\/iflight-xing-e-5215-motor-300kv\"\u003eiFlight XING-E 5215\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-em3115-motor-900kv\"\u003eGEPRC EM3115\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFlight controller (8 outputs): \u003ca href=\"\/products\/geprc-taker-h743-bt-8bit-80a-stack\"\u003eGEPRC TAKER H743\u003c\/a\u003e, \u003ca href=\"\/products\/matek-h743-slim-v4-flight-controller\"\u003eMatek H743-SLIM V4\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x TAKER S100 8S BLS 100A ESC with top and bottom case\u003c\/li\u003e\n\u003cli\u003e1x 50V 2200µF capacitor\u003c\/li\u003e\n\u003cli\u003e2x 10AWG silicone power leads (240mm)\u003c\/li\u003e\n\u003cli\u003e1x 2-pin Dupont signal cable (150mm)\u003c\/li\u003e\n\u003cli\u003e8x M2x7 case screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"With Case","offer_id":46435851829282,"sku":"AF-GEP-TAKER-S100-8S-100A","price":4999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/12-2-600x600.jpg?v=1787067030"},{"product_id":"geprc-pdb-hexacopter-power-distribution-board","title":"GEPRC PDB Hexacopter Power Distribution Board","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC PDB Hexacopter is a six-channel power distribution board for hexacopters running six separate ESCs. It carries pack power to each ESC, passes the six signal lines through from the flight controller and includes an on-board current meter. It is not a flight controller or an ESC.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_DeMain_0000-3-600x600.jpg\" alt=\"GEPRC PDB Hexacopter Power Distribution Board\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003e6 output channels for individual ESCs\u003c\/li\u003e\n\u003cli\u003e60A continuous \/ 80A burst per channel (360A \/ 480A total)\u003c\/li\u003e\n\u003cli\u003eOn-board current meter\u003c\/li\u003e\n\u003cli\u003eDShot150\/300\/600 signal pass-through\u003c\/li\u003e\n\u003cli\u003eXT90+ power input with 10AWG leads\u003c\/li\u003e\n\u003cli\u003ePlug-in FC connection cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/3_DeMain_0000-600x600.jpg\" alt=\"GEPRC PDB Hexacopter Power Distribution Board\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003e3-8S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent\u003c\/th\u003e\n\u003ctd\u003e60A continuous, 80A burst per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003e30 x 30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e53 x 53mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e11.8g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBoard marking\u003c\/th\u003e\n\u003ctd\u003eHEX X PDB V1.0; pads CUR, S1–S6, BAT, GND\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeeds:\u003c\/strong\u003e six individual ESCs and a flight controller with at least 6 motor outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting is 30 x 30mm\u003c\/strong\u003e, not the common 30.5 x 30.5mm - check your frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot a 4-in-1 stack:\u003c\/strong\u003e it carries power and signals only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSingle ESCs: \u003ca href=\"\/products\/geprc-taker-s100-8s-bls-100a-esc-with-case-version\"\u003eGEPRC TAKER S100 100A\u003c\/a\u003e, \u003ca href=\"\/products\/tbs-lucid-12s-90a-esc\"\u003eTBS Lucid 12S 90A\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFlight controllers (6+ outputs): \u003ca href=\"\/products\/geprc-taker-h743-bt-8bit-80a-stack\"\u003eGEPRC TAKER H743\u003c\/a\u003e, \u003ca href=\"\/products\/matek-h743-slim-v4-flight-controller\"\u003eMatek H743-SLIM V4\u003c\/a\u003e, \u003ca href=\"\/products\/micoair743-v2-flight-controller-fc-only\"\u003eMicoAir743 V2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x hexacopter power distribution board\u003c\/li\u003e\n\u003cli\u003e2x 50V 2200µF capacitors\u003c\/li\u003e\n\u003cli\u003e2x XT90+ connectors with protective housing and 10AWG silicone wire\u003c\/li\u003e\n\u003cli\u003e1x SH1.0-10P to 8P FC-to-PDB cable\u003c\/li\u003e\n\u003cli\u003e8x M3x8 damping balls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"Default Title","offer_id":46435852681250,"sku":"GP107970","price":1999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_DeMain_0000-3-600x600.jpg?v=1787067046"},{"product_id":"geprc-t-cube18-analog-quadcopter","title":"GEPRC T-Cube18 Analog Quadcopter","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC T-Cube18 is a tiny 1.8 inch analog FPV quad that you can fly almost anywhere: around the living room, through the garden, or ripping lines at the park. At just 38g with props tucked inside a tough frame, it's small enough to be relaxed about crashes, and the ELRS receiver is already built in, so you just bind your radio, strap on a 2S pack and go.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/5_DeMain_0075-2.jpg\" alt=\"GEPRC T-Cube18 Analog side view\"\u003e\n\u003ch3\u003eWhy pilots choose the T-Cube18\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFly indoors and out:\u003c\/strong\u003e 87mm wheelbase and 38g, small enough for indoor practice yet punchy enough outdoors on 2S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBind and fly:\u003c\/strong\u003e built-in ELRS 2.4GHz receiver works with any ELRS radio\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear analog video:\u003c\/strong\u003e Caddx Ant camera with a 400mW RAD Tiny VTX for solid range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth, responsive:\u003c\/strong\u003e GEPRC SPEEDX2 1002 18000KV motors on a TAKER F411 AIO with BMI270 gyro\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSturdy and light:\u003c\/strong\u003e 1.5mm carbon plate keeps it rigid without adding weight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady for repairs:\u003c\/strong\u003e spare props and tools included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/4_DeMain_0075-2.jpg\" alt=\"GEPRC T-Cube18 Analog top view\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFrame\u003c\/th\u003e\n\u003ctd\u003eT-Cube18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheelbase\u003c\/th\u003e\n\u003ctd\u003e87mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFC\u003c\/th\u003e\n\u003ctd\u003eTAKER F411-12A-E 1-2S AIO (STM32F411CEU6, BMI270 gyro)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eESC\u003c\/th\u003e\n\u003ctd\u003e12A 8Bit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003eSPEEDX2 1002 18000KV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProp\u003c\/th\u003e\n\u003ctd\u003eGemfan 45mm x8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBattery connector\u003c\/th\u003e\n\u003ctd\u003eXT30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVTX\u003c\/th\u003e\n\u003ctd\u003eRAD Tiny 5.8G 400mW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCamera\u003c\/th\u003e\n\u003ctd\u003eCADDX ANT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReceiver\u003c\/th\u003e\n\u003ctd\u003eBuilt-in ELRS 2.4G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e38g ±1g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended battery\u003c\/th\u003e\n\u003ctd\u003eLiHV 2S 500mAh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlight time\u003c\/th\u003e\n\u003ctd\u003e3-5 minutes (low-speed cruise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x T-Cube18 Quadcopter\u003c\/li\u003e\n\u003cli\u003e1x Gemfan 45mm x4 (2 pairs)\u003c\/li\u003e\n\u003cli\u003e1x Plum screwdriver, 1x L-shaped screwdriver 1.5mm\u003c\/li\u003e\n\u003cli\u003e8x Rubber band for battery fixing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"afn\"\u003e\u003cp\u003e\u003cstrong\u003eWhat else you need:\u003c\/strong\u003e an ELRS 2.4GHz radio, analog FPV goggles, 2S LiHV batteries with XT30 (around 500mAh) and a charger. Not sure what to pick? Message us and we'll help you put a kit together.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"Default","offer_id":46542515830818,"sku":"AF-GEP-TCUBE18-BNF-QUADCOPTER","price":15499.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_DeMain_0075-2.jpg?v=1787613214"},{"product_id":"geprc-o4-series-step-down-bec","title":"GEPRC O4 Series Step-Down BEC","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC O4 Series Step-Down BEC is a compact voltage regulator for powering DJI O4-series air units from your flight battery. It converts high pack voltage down to a clean, stable supply for the air unit, protecting it from voltage spikes and letting you run the O4 on higher-cell builds.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_Main_0000-1_c6e21bc5-e7fc-41a1-a9d7-de0d3aa477eb.jpg\" alt=\"GEPRC O4 Series Step-Down BEC\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eStep-down regulation for DJI O4-series air units\u003c\/li\u003e\n\u003cli\u003eClean, stable output for reliable video transmission\u003c\/li\u003e\n\u003cli\u003eCompact and light for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/3_Main_0000-1_e05fb745-c44f-4b05-aca8-bf6ecb85a480.jpg\" alt=\"GEPRC O4 Series Step-Down BEC\"\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor:\u003c\/strong\u003e DJI O4-series air units (O4 Air Unit Pro, O4 Lite, O4 Wide) where the flight controller cannot supply a clean, high-current 9-12V rail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput range:\u003c\/strong\u003e check the voltage printed on the board against your pack before wiring - GEPRC's listing does not publish it. Contact \u003ca href=\"mailto:info@aeroflow.in\"\u003einfo@aeroflow.in\u003c\/a\u003e if unsure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot needed\u003c\/strong\u003e if your stack already has a 9-12V BEC rated 2A+ (most current 30.5 stacks do).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoards without a high-voltage BEC: \u003ca href=\"\/products\/geprc-taker-f722-45a-32bit-aio\"\u003eGEPRC TAKER F722 AIO\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-g4-45a-8bit-aio\"\u003eGEPRC TAKER G4 AIO\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1x GEPRC O4 Series step-down BEC\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"Default Title","offer_id":68693329117218,"sku":"AF-GEP-O4-STEPDOWN-BEC","price":499.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_Main_0000-1_7a0a5a6e-ead7-4524-8449-ec666a752de5.jpg?v=1792096066"},{"product_id":"geprc-taker-g4-45a-8bit-aio","title":"GEPRC TAKER G4 45A 8Bit AIO","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC TAKER G4 45A 8Bit AIO is a compact all-in-one flight controller and 45A 4-in-1 ESC for 2–6S micro and 3–4\" builds. It uses a 170MHz STM32G473 with the ESC MCU driving the FETs directly, saving space and weight — the whole board weighs 9g.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_DeMain_0000-3_c27aed36-91a5-4335-9135-3d5b13c9e0a7.jpg\" alt=\"GEPRC TAKER G4 45A AIO\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eSTM32G473 at 170MHz with ICM42688-P gyro\u003c\/li\u003e\n\u003cli\u003e45A continuous ESC on 2–6S\u003c\/li\u003e\n\u003cli\u003eIntegrated ESC and MCU driving FETs directly for a light, compact board\u003c\/li\u003e\n\u003cli\u003eCurrent sensor, buzzer and LED pads, Type-C USB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/3_DeMain_0000-3.jpg\" alt=\"GEPRC TAKER G4 45A AIO\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMCU\u003c\/th\u003e\n\u003ctd\u003eSTM32G473CEU6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGyro\u003c\/th\u003e\n\u003ctd\u003eICM42688-P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOSD\u003c\/th\u003e\n\u003ctd\u003eBetaflight OSD (AT7456E)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUARTs\u003c\/th\u003e\n\u003ctd\u003e4 (UART1, 2, 4, 5)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eESC continuous \/ burst\u003c\/th\u003e\n\u003ctd\u003e45A \/ 50A (5s)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003e2–6S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBEC\u003c\/th\u003e\n\u003ctd\u003e5V 3A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtocols\u003c\/th\u003e\n\u003ctd\u003eDShot600, Oneshot, Multishot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBoard size\u003c\/th\u003e\n\u003ctd\u003e33.8 x 34.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003e25.5 x 25.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e9g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFirmware target\u003c\/th\u003e\n\u003ctd\u003eTAKERG4AIO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e 25.5 x 25.5mm AIO mount - 2.5-4\" cinewhoops and micros.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBEC is 5V 3A only\u003c\/strong\u003e - a DJI O4 \/ O4 Pro needs 9-12V from VBAT or a separate BEC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 2-6S. \u003cstrong\u003eReceiver:\u003c\/strong\u003e not built in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrames (25.5mm AIO): \u003ca href=\"\/products\/geprc-gep-cl30-v3-frame\"\u003eGEPRC CL30 V3\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-gep-cl35-v3-frame\"\u003eGEPRC CL35 V3\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-gep-ct35-frame\"\u003eGEPRC CT35\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors: \u003ca href=\"\/products\/geprc-speedx2-1404-motor\"\u003eGEPRC SPEEDX2 1404\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-speedx2-2105-5-motor\"\u003eSPEEDX2 2105.5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eExtra BEC for HD: \u003ca href=\"\/products\/geprc-o4-series-step-down-bec\"\u003eGEPRC O4 Series BEC\u003c\/a\u003e, \u003ca href=\"\/products\/iflight-blitz-bec-module-v1-1\"\u003eiFlight BLITZ BEC\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x GEPRC TAKER G4 45A AIO\u003c\/li\u003e\n\u003cli\u003e1x cable set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"Default Title","offer_id":68693448097826,"sku":"AF-GEP-TAKER-G4-45A-8BIT","price":6499.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_DeMain_0000-5.jpg?v=1792096069"},{"product_id":"geprc-gep-cl35-v3-frame","title":"GEPRC GEP-CL35 V3 Frame","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC GEP-CL35 V3 is the upgraded Cinelog35 frame — a 3.5\" ducted cinewhoop frame designed around the DJI O4 Air Unit Pro. The bottom-mounted camera sits on damping balls to remove jello, and a redesigned layout gives easy access to the O4's USB-C port and microSD card.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/Frame.jpg\" alt=\"GEPRC GEP-CL35 V3 Frame\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eDesigned for the DJI O4 Air Unit Pro\u003c\/li\u003e\n\u003cli\u003eSoft-mounted bottom camera on damping balls\u003c\/li\u003e\n\u003cli\u003eEasy Type-C and microSD access\u003c\/li\u003e\n\u003cli\u003eGPS mount (22 x 22mm module) and action-camera base mount\u003c\/li\u003e\n\u003cli\u003eUpgraded prop guards and matte black carbon plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_DeMain_0000.jpg\" alt=\"GEPRC GEP-CL35 V3 Frame\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWheelbase\u003c\/th\u003e\n\u003ctd\u003e142mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProps\u003c\/th\u003e\n\u003ctd\u003e3.5\" (95mm duct inner diameter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlates\u003c\/th\u003e\n\u003ctd\u003emain 3.5mm, gimbal 2mm, bottom 1.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrame weight\u003c\/th\u003e\n\u003ctd\u003eabout 126.8g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e203.5 x 203.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFC mount\u003c\/th\u003e\n\u003ctd\u003e25.5 x 25.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVTX mount\u003c\/th\u003e\n\u003ctd\u003e20 x 20 or 25.5 x 25.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor mount\u003c\/th\u003e\n\u003ctd\u003e12 x 12mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCamera width\u003c\/th\u003e\n\u003ctd\u003e20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eFlight controller: 25.5 x 25.5mm AIO only.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotors:\u003c\/strong\u003e 12x12mm - 2004-2105 class for 3.5\" ducted props.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo:\u003c\/strong\u003e designed for the DJI O4 Pro (20mm camera). GPS mount takes 22 x 22mm modules.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAIO: \u003ca href=\"\/products\/geprc-taker-f722-45a-32bit-aio\"\u003eGEPRC TAKER F722 45A AIO\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-g4-45a-8bit-aio\"\u003eGEPRC TAKER G4 45A AIO\u003c\/a\u003e, \u003ca href=\"\/products\/micoair743-v2-aio-am32\"\u003eMicoAir743 V2 AIO 45A\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors: \u003ca href=\"\/products\/geprc-speedx2-2105-5-motor\"\u003eGEPRC SPEEDX2 2105.5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eProps: \u003ca href=\"\/products\/gemfan-ducted-d90s-3-t-mount-propeller\"\u003eGemfan D90S-3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMain, gimbal and bottom carbon plates; prop guards\u003c\/li\u003e\n\u003cli\u003eCamera, receiver, antenna, capacitor, GPS and action-cam mounts\u003c\/li\u003e\n\u003cli\u003e4x UFL extension cables, battery straps, pads and strap mounts\u003c\/li\u003e\n\u003cli\u003eXT60 plug, standoffs, damping balls, tools and screw pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"Default Title","offer_id":68693453439010,"sku":"AF-GEP-GEPCL35-V3","price":7899.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_DeMain_0000_d721853b-05b8-433f-962d-20be677cecf0.jpg?v=1792096071"},{"product_id":"ufl-extension-cable","title":"GEPRC UFL Antenna Extension Cable","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eA 40mm U.FL (IPEX) extension cable for relocating a VTX or receiver antenna. Use it to reach an antenna mount at the back of the frame or to keep strain off the small U.FL socket on your video transmitter.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eU.FL (IPEX) connector at each end - one plugs into the board, the other accepts your antenna\u003c\/li\u003e\n\u003cli\u003eShort 40mm length for tidy routing\u003c\/li\u003e\n\u003cli\u003eReduces strain on VTX and receiver U.FL sockets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPEX1 \/ U.FL only\u003c\/strong\u003e - not for IPEX4 (MHF4), MMCX or SMA connectors.\u003c\/li\u003e\n\u003cli\u003eWorks on 2.4GHz, 900MHz and 5.8GHz links - each extra joint adds a little signal loss, so keep runs short.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eU.FL antennas: \u003ca href=\"\/products\/hglrc-mini-hammer-ipex-antenna-v2\"\u003eHGLRC Mini Hammer V2\u003c\/a\u003e, \u003ca href=\"\/products\/foxeer-lollipop-4-plus-antenna\"\u003eFoxeer Lollipop 4 Plus\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e2x GEPRC U.FL extension cable, 40mm\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"40mm \/ 2 pcs","offer_id":68693573074978,"sku":"AF-GEN-UFL-EXTENSION-CABLE-40MM","price":699.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/WechatIMG459-1800x1800.png?v=1793144284"},{"product_id":"geprc-soma-3-3g-directional-patch-antenna","title":"GEPRC SOMA 3.3G Directional Patch Antenna","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC SOMA 3.3G Directional Patch Antenna is a high-gain (17dBi) RHCP flat-panel antenna for the receiving end of a 3.3GHz long-range video link. A dual-layer PCB RF design gives low VSWR, every unit is checked on a spectrum analyser, and the slim injection-moulded housing has a 1\/4-inch aluminium base that fits standard brackets.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_Main_0000-3.jpg\" alt=\"GEPRC SOMA 3.3G Directional Patch Antenna\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eUp to 17dBi gain with low VSWR (≤1.47)\u003c\/li\u003e\n\u003cli\u003eDual-layer PCB RF design\u003c\/li\u003e\n\u003cli\u003eEach unit tested on a spectrum analyser\u003c\/li\u003e\n\u003cli\u003e1\/4-inch aluminium base fits common brackets and tripods\u003c\/li\u003e\n\u003cli\u003eQuality SMA connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/3_Main_0000-3.jpg\" alt=\"GEPRC SOMA 3.3G Directional Patch Antenna\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCentre frequency\u003c\/th\u003e\n\u003ctd\u003e3.3GHz (3.0–3.5GHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePolarisation\u003c\/th\u003e\n\u003ctd\u003eRHCP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGain\u003c\/th\u003e\n\u003ctd\u003e17dBi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAxial ratio\u003c\/th\u003e\n\u003ctd\u003e≤3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSWR\u003c\/th\u003e\n\u003ctd\u003e≤1.47\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRadiation efficiency\u003c\/th\u003e\n\u003ctd\u003e86%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCross-polarisation suppression\u003c\/th\u003e\n\u003ctd\u003e−25dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e203.5 x 203.5 x 20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e293g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHousing\u003c\/th\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eSMA (male thread, female pin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1x SOMA 3.3G directional patch antenna\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAircraft end: \u003ca href=\"\/products\/geprc-soma-3-3g-antenna\"\u003eGEPRC SOMA 3.3G Antenna (RHCP)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e3.3GHz only – it will not work on 5.8GHz or 2.4GHz. Check local regulations before using 3.3GHz video.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"Default Title","offer_id":68693575041058,"sku":"AF-GEP-SOMA-3.3G-DIRECTIONAL","price":6999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_Main_0000_aacf55ea-01b0-4ce1-a1f4-c5f31e251384.jpg?v=1792096076"},{"product_id":"geprc-triple-feed-patch-1-5-8ghz-antenna","title":"GEPRC Triple Feed Patch-1 5.8GHz Antenna","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC Triple Feed Patch-1 is a circularly polarised 5.8GHz patch antenna for goggles and ground stations. A triple-feed design gives very clean circular polarisation and a wide 660MHz bandwidth, with 9.4dBi of directional gain for extended range.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/02-7080045158_affbe60c-dc57-40e2-a533-9f12c66e0a7b.jpg\" alt=\"GEPRC Triple Feed Patch-1 5.8GHz Antenna SMA\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eTriple-feed design for excellent circular polarisation (axial ratio \u0026lt;1.3)\u003c\/li\u003e\n\u003cli\u003eWide 5.47–6.13GHz bandwidth\u003c\/li\u003e\n\u003cli\u003e9.4dBi directional gain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/02-9105271005_e460e82f-9c22-48d1-a2f2-662723fee8bc.jpg\" alt=\"GEPRC Triple Feed Patch-1 5.8GHz Antenna\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCentre frequency\u003c\/th\u003e\n\u003ctd\u003e5.8GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBandwidth\u003c\/th\u003e\n\u003ctd\u003e660MHz (5.47–6.13GHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGain\u003c\/th\u003e\n\u003ctd\u003e9.4dBi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHalf-power beamwidth\u003c\/th\u003e\n\u003ctd\u003e55° (H and V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVSWR\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;1.22 at centre frequency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRadiation efficiency\u003c\/th\u003e\n\u003ctd\u003e83.5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eSMA male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGoggle \/ ground-station patch\u003c\/strong\u003e, SMA male - fits SMA goggle ports. Not RP-SMA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolarisation (RHCP or LHCP) is not stated on this listing\u003c\/strong\u003e - it must match your quad's antenna. Contact \u003ca href=\"mailto:info@aeroflow.in\"\u003einfo@aeroflow.in\u003c\/a\u003e to confirm before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55° beam\u003c\/strong\u003e - pair with an omni on the second diversity port.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGoggles: \u003ca href=\"\/products\/skyzone-cobra-x-v4-5-8ghz-fpv-goggles\"\u003eSkyzone Cobra X V4\u003c\/a\u003e, \u003ca href=\"\/products\/skyzone-cobra-sd-5-8ghz-fpv-goggles\"\u003eSkyzone Cobra SD\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eOmni partner: \u003ca href=\"\/products\/foxeer-lollipop-4-antenna\"\u003eFoxeer Lollipop 4\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1x GEPRC Triple Feed Patch-1 5.8GHz antenna (SMA)\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"SMA","offer_id":68693578973218,"sku":"AF-GEP-TRIPLE-FEED-PATCH1-5.8GHZ","price":1649.0,"currency_code":"INR","in_stock":true},{"title":"RP-SMA","offer_id":68958818172962,"sku":"AF-GEP-TRIPLE-FEED-PATCH1-5.8GHZ-RPSMA","price":1649.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/02-3878484789_a22996f4-20eb-4875-afb1-46201dbd11ad.jpg?v=1792096077"},{"product_id":"geprc-em2807-motor","title":"GEPRC EM2807 Motor","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC EM2807 1350KV is a long-range FPV motor from GEPRC's EM series, built for 6–8\" props on 6S — a natural fit for 7\" long-range quads. It combines a high-torque magnetic circuit with a strong M5 steel shaft and a standard 19 x 19mm base.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_Main_0000_a1106030-20ac-4751-86b9-5b7a2c521366.jpg\" alt=\"GEPRC EM2807 1350KV Motor\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eDesigned for 7–8\" long-range FPV on 6S\u003c\/li\u003e\n\u003cli\u003eHigh-torque magnetic circuit, N52H magnets\u003c\/li\u003e\n\u003cli\u003eHigh-strength M5 steel shaft\u003c\/li\u003e\n\u003cli\u003eNSK\/NMB bearings, single-strand copper winding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/3_Main_0000_04b1c2ce-192f-4fea-9dac-7c67dc0ba024.jpg\" alt=\"GEPRC EM2807 1350KV Motor\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eKV\u003c\/th\u003e\n\u003ctd\u003e1350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003e12N14P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShaft\u003c\/th\u003e\n\u003ctd\u003eø5mm, 16mm protrusion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor dimensions\u003c\/th\u003e\n\u003ctd\u003eø33 x 20.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e57g (with leads)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead wire\u003c\/th\u003e\n\u003ctd\u003e260mm, 18AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003e19 x 19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCells\u003c\/th\u003e\n\u003ctd\u003e6S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterphase resistance\u003c\/th\u003e\n\u003ctd\u003e45mΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePeak current\u003c\/th\u003e\n\u003ctd\u003e47A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax power\u003c\/th\u003e\n\u003ctd\u003e1080W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended props\u003c\/th\u003e\n\u003ctd\u003e6–8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended ESC\u003c\/th\u003e\n\u003ctd\u003e50–60A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount: 19 x 19mm\u003c\/strong\u003e - not 16x16-only frames (HGLRC MY7).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 6S. \u003cstrong\u003eESC:\u003c\/strong\u003e 50-60A per motor. \u003cstrong\u003eProps:\u003c\/strong\u003e 6-8\" (M5).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrames: \u003ca href=\"\/products\/geprc-mark4-7-frame\"\u003eGEPRC Mark4-7\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-gep-moz7-v2-frame\"\u003eGEPRC MOZ7 V2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eStacks: \u003ca href=\"\/products\/geprc-taker-f405-bls-60a-v2-stack\"\u003eGEPRC TAKER F405 BLS V2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eProps: \u003ca href=\"\/products\/gemfan-flash-7040-3-propeller\"\u003eGemfan Flash 7040-3\u003c\/a\u003e, \u003ca href=\"\/products\/hqprop-dp-7x3-5x3-pc-propeller\"\u003eHQProp DP 7x3.5x3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x GEPRC EM2807 1350KV motor\u003c\/li\u003e\n\u003cli\u003e4x M3x9 round-head screws\u003c\/li\u003e\n\u003cli\u003e1x M5 anti-slip nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"1350KV","offer_id":68693620850722,"sku":"AF-GEP-EM2807-1350KV","price":1949.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_Main_0000_fb48a21b-f8a9-43a6-9f6f-ffcf3409d401.jpg?v=1792096079"},{"product_id":"geprc-speedx2-1404-motor","title":"GEPRC SPEEDX2 1404 Motor","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC SPEEDX2 1404 3850KV is a lightweight micro motor for 2–4\" builds such as toothpicks, small cinewhoops and sub-250g freestyle quads. It pairs N52H magnets with NSK\/NMB bearings for high power output at about 10.5g, and the 3850KV winding sits between the 3S–4S-friendly 4600KV and 4S 3000KV versions.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2-2_101f028c-949d-4bed-8612-8f5ae59e4278.jpg\" alt=\"GEPRC SPEEDX2 1404 3850KV Motor\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eLight, high-output motor for 2–4\" builds\u003c\/li\u003e\n\u003cli\u003eN52H magnets, NSK\/NMB bearings\u003c\/li\u003e\n\u003cli\u003eSingle-strand copper winding\u003c\/li\u003e\n\u003cli\u003eRed and black finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/3-2_d38f48c3-22b6-49bb-9f75-9cb96d20df1c.jpg\" alt=\"GEPRC SPEEDX2 1404 3850KV Motor\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eKV\u003c\/th\u003e\n\u003ctd\u003e3850\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003e9N12P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStator\u003c\/th\u003e\n\u003ctd\u003e1404\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor dimensions\u003c\/th\u003e\n\u003ctd\u003eø18.2 x 13.8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShaft\u003c\/th\u003e\n\u003ctd\u003eø1.5mm, 4mm protrusion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003e9 x 9mm, M2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead wire\u003c\/th\u003e\n\u003ctd\u003e160mm, 26AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eapprox. 10.5g (with leads)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 4S (3-4S range for this KV). Not 6S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e 9 x 9mm M2. \u003cstrong\u003eShaft:\u003c\/strong\u003e 1.5mm - T-mount or 1.5mm-hub props (2mm-hole props will be loose).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESC:\u003c\/strong\u003e 25A+ per motor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrames: \u003ca href=\"\/products\/geprc-gep-cl30-v3-frame\"\u003eGEPRC CL30 V3\u003c\/a\u003e, \u003ca href=\"\/products\/aos-cine25-v5-frame-kit\"\u003eAOS Cine25 V5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAIO: \u003ca href=\"\/products\/geprc-taker-f722-45a-32bit-aio\"\u003eGEPRC TAKER F722 45A\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-g4-45a-8bit-aio\"\u003eTAKER G4 45A\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1x GEPRC SPEEDX2 1404 3850KV motor\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"3850KV","offer_id":68693620883490,"sku":"AF-GEP-SPEEDX2-1404-3850KV","price":1649.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1._11844800-6709-4016-bc96-76ddd61013ca.jpg?v=1792096112"},{"product_id":"geprc-elrs-915m-2-4g-gemini-xrossband-receiver","title":"GEPRC ELRS 915M\/2.4G Gemini Xrossband Receiver","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC ELRS 915M\/2.4G Gemini Xrossband Receiver is an ExpressLRS dual-band receiver built on two of Semtech's third-generation LR1121 RF chips. It can run 915MHz Gemini, 2.4GHz Gemini, or both bands at once for stronger interference rejection, and it works with existing single-band 915MHz and 2.4GHz ELRS transmitters.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_Main_0000-3_05633119-3568-446e-81a0-9672c499c49f.jpg\" alt=\"GEPRC ELRS 915M\/2.4G Gemini Xrossband Receiver\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eDual LR1121 chips: 915M Gemini, 2.4G Gemini, or 915M+2.4G dual-band\u003c\/li\u003e\n\u003cli\u003eDual-band mode needs a dual-band TX module and 915M\/2.4G antennas\u003c\/li\u003e\n\u003cli\u003eTCXO for stable performance across temperatures\u003c\/li\u003e\n\u003cli\u003eTelemetry up to 100mW; refresh rate up to 1000Hz\u003c\/li\u003e\n\u003cli\u003eWi-Fi firmware updates\u003c\/li\u003e\n\u003cli\u003eCompact: 18 x 23.6 x 5.7mm, 1.7g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/3_Main_0000-3_df9ee16a-f107-48ec-a409-e1a6f07af152.jpg\" alt=\"GEPRC ELRS 915M\/2.4G Gemini Xrossband Receiver\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eChips\u003c\/th\u003e\n\u003ctd\u003eESP32-PICO-D4, 2x LR1121\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOscillator\u003c\/th\u003e\n\u003ctd\u003eTCXO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRefresh rate\u003c\/th\u003e\n\u003ctd\u003e25–1000Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating voltage\u003c\/th\u003e\n\u003ctd\u003e5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAntenna connector\u003c\/th\u003e\n\u003ctd\u003eIPEX1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTelemetry power\u003c\/th\u003e\n\u003ctd\u003e100mW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFirmware\u003c\/th\u003e\n\u003ctd\u003eGEPRC 900\/2400 Gemini Xrossband RX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e18 x 23.6 x 5.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.7g (receiver only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.4GHz:\u003c\/strong\u003e works with any ELRS 2.4GHz radio. \u003cstrong\u003eDual-band\u003c\/strong\u003e needs a dual-band transmitter: GX12, TX16S MK3 or the Nomad module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn India:\u003c\/strong\u003e the licence-free sub-GHz band is 865-867MHz. Flash radio and receiver to the ExpressLRS \u003cstrong\u003eIN866\u003c\/strong\u003e domain before using the 900MHz side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e 4-pin cable to an FC UART (RX to TX, TX to RX), 5V. Serial RX, CRSF.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual-band TX: \u003ca href=\"\/products\/nomad-dual-1-watt-gemini-xrossband-expresslrs-module\"\u003eRadioMaster Nomad\u003c\/a\u003e, \u003ca href=\"\/products\/radiomaster-gx12-dual-band-gemini-x-radio-controller\"\u003eRadioMaster GX12\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGEPRC stacks: \u003ca href=\"\/products\/geprc-taker-h743-bt-8bit-80a-stack\"\u003eTAKER H743\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-taker-f722-bt-32bit-50a-stack\"\u003eTAKER F722 BT\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x ELRS 915M\/2.4G Gemini Xrossband receiver\u003c\/li\u003e\n\u003cli\u003e2x 915M\/2.4G dual-band T antennas\u003c\/li\u003e\n\u003cli\u003e1x heat-shrink tube\u003c\/li\u003e\n\u003cli\u003e1x 4-pin silicone cable\u003c\/li\u003e\n\u003cli\u003e1x user manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"Default Title","offer_id":68693625143330,"sku":"AF-GEP-ELRS-915M-2.4G","price":2999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_Main_0000-3_5925b2a1-c835-42c5-8b98-aa43332822ed.jpg?v=1792096081"},{"product_id":"geprc-maten-5-8g-5w-vtx-pro","title":"GEPRC MATEN 5.8G 5W VTX Pro","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC MATEN 5.8G 5W VTX Pro is a high-power analog video transmitter for long-range FPV, with five selectable power levels up to 5000mW. A CNC aluminium shell and built-in turbofan keep it cool, with over-temperature protection, and a built-in microphone carries live audio from the quad.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/4_Main_0000_b3d67c84-3e1b-4045-8a37-80f74114285a.jpg\" alt=\"GEPRC MATEN 5.8G 5W VTX Pro\"\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003ePower levels: 300 \/ 600 \/ 1600 \/ 3000 \/ 5000mW and Pit mode\u003c\/li\u003e\n\u003cli\u003eBuilt-in micro turbofan and over-temperature protection\u003c\/li\u003e\n\u003cli\u003eCNC aluminium shell for cooling and impact resistance\u003c\/li\u003e\n\u003cli\u003eBuilt-in microphone\u003c\/li\u003e\n\u003cli\u003eIRC Tramp control via OSD; button and LED indicators\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1_9f0e8637-9d8d-4def-b518-e5c0b06cc8b4.jpg\" alt=\"GEPRC MATEN 5.8G 5W VTX Pro\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_affa5565-eeb3-405e-a841-935e50df517c.jpg\" alt=\"GEPRC MATEN 5.8G 5W VTX Pro\"\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency\u003c\/th\u003e\n\u003ctd\u003e4.9–5.8GHz, 80 channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003e7–36V (2–8S)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e5V output\u003c\/th\u003e\n\u003ctd\u003e600mA (camera\/fan)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAntenna connector\u003c\/th\u003e\n\u003ctd\u003eSMA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003e20 x 20 or 25.5 x 25.5mm (M2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e60 x 33.2 x 19.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e49.5g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame fit:\u003c\/strong\u003e 20x20 or 25.5x25.5mm (M2) - not 30.5x30.5 stacks. At 49.5g it suits 7\"+ long-range builds and planes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGoggles:\u003c\/strong\u003e 5.8GHz analog goggles on standard channels; the 4.9GHz channels need a wideband receiver. Not DJI, Walksnail or HDZero.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLowest power is 300mW\u003c\/strong\u003e - there is no 25mW setting, so it is not suitable where 25mW is the legal limit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna:\u003c\/strong\u003e SMA; fit it before powering up. \u003cstrong\u003eFlight controller:\u003c\/strong\u003e IRC Tramp.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSMA antennas: \u003ca href=\"\/products\/iflight-albatross-v2-1-5-8ghz-antenna\"\u003eiFlight Albatross V2.1 130mm\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-momoda2-5-8g-dual-antenna\"\u003eGEPRC Momoda2 Dual SMA\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGround station: \u003ca href=\"\/products\/geprc-triple-feed-patch-array-5-8ghz\"\u003eGEPRC Triple Feed Patch\u003c\/a\u003e, \u003ca href=\"\/products\/hdzero-goggle-2-with-echo-antenna-kit\"\u003eHDZero Goggle 2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x MATEN 5.8G 5W VTX Pro\u003c\/li\u003e\n\u003cli\u003e1x SMA adapter\u003c\/li\u003e\n\u003cli\u003e1x SH1.25 6-pin cable\u003c\/li\u003e\n\u003cli\u003eM2 screws and manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eHigh output power and some frequencies may require authorisation — check your local regulations before transmitting.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"Default Title","offer_id":68693782626338,"sku":"AF-GEP-MATEN-5.8G-5W","price":9899.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2_Main_0000_701a2f54-c4d1-469b-8c7e-749a1b44e5fc.jpg?v=1792096083"},{"product_id":"geprc-taker-f405-bls-65a-v2-stack","title":"GEPRC TAKER F405 BLS 65A V2 Stack","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC TAKER F405 BLS 65A V2 Stack pairs the GEP-F405-HD V3 flight controller with the TAKER H65_8S_BLS 65A 4-in-1 ESC — more current headroom than the 60A version in the same compact 42 x 45.7mm ESC footprint, for heavier freestyle and long-range builds. Direct DJI air unit plug included.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/9_DeMain_0000-2.jpg\" alt=\"GEPRC TAKER F405 BLS 65A V2 Stack\"\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eMainstream STM32F405 processor with the ICM42688-P gyro\u003c\/li\u003e\n\u003cli\u003e16MB onboard blackbox for flight logs\u003c\/li\u003e\n\u003cli\u003eIntegrated LC power filter\u003c\/li\u003e\n\u003cli\u003eType-C USB port\u003c\/li\u003e\n\u003cli\u003ePlugs straight into a DJI air unit — no soldering for HD video\u003c\/li\u003e\n\u003cli\u003eDual independent BEC: 12V @ 2.5A and 5V @ 3A\u003c\/li\u003e\n\u003cli\u003eTAKER H65_8S_BLS 65A 4-in-1 ESC (BLHeli_S) for smooth motor response\u003c\/li\u003e\n\u003cli\u003eSilicone shock-absorbing mounts keep the gyro stable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFlight controller (GEP-F405-HD V3)\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMCU\u003c\/th\u003e\n\u003ctd\u003eSTM32F405\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGyro (IMU)\u003c\/th\u003e\n\u003ctd\u003eICM42688-P (SPI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBarometer\u003c\/th\u003e\n\u003ctd\u003eYes (onboard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlackbox\u003c\/th\u003e\n\u003ctd\u003e16MB onboard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOSD\u003c\/th\u003e\n\u003ctd\u003eBetaflight OSD (AT7456E chip)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUARTs\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor outputs\u003c\/th\u003e\n\u003ctd\u003eM1–M6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBEC\u003c\/th\u003e\n\u003ctd\u003e5V @ 3A + 12V @ 2.5A, dual independent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower filter\u003c\/th\u003e\n\u003ctd\u003eIntegrated LC filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUSB\u003c\/th\u003e\n\u003ctd\u003eType-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAir unit\u003c\/th\u003e\n\u003ctd\u003eDirect plug-in for DJI air unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e3–6S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e37.15 x 37.15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003e30.5 x 30.5mm (4mm holes, 3mm with silicone grommets)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e7.3g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFirmware target\u003c\/th\u003e\n\u003ctd\u003eGEPRCF405\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eESC (TAKER H65_8S_BLS 65A 4-in-1)\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eContinuous \/ burst\u003c\/th\u003e\n\u003ctd\u003e65A \/ 70A (5 seconds)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e3–8S LiPo (ESC rating — see battery note below)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFirmware\u003c\/th\u003e\n\u003ctd\u003eBLHeli_S, target B_X_30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtocols\u003c\/th\u003e\n\u003ctd\u003eDShot150 \/ DShot300 \/ DShot600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent sensor\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e42 x 45.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003e30.5 x 30.5mm (4mm holes, 3mm with silicone grommets)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e14.9g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery: 6S maximum for this stack.\u003c\/strong\u003e The ESC alone is rated 3–8S, but the GEP-F405-HD V3 flight controller is 3–6S. XT60 power lead included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e heavier 5\" and 6–7\" builds. For a standard 5\" see the \u003ca href=\"\/products\/geprc-taker-f405-bls-60a-v2-stack\"\u003e60A V2 Stack\u003c\/a\u003e; for 7\" and up see the \u003ca href=\"\/products\/geprc-taker-f405-bls-80a-v2-stack\"\u003e80A V2 Stack\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e 30.5 x 30.5mm stack mount. Stack weight about 22.2g (FC 7.3g + ESC 14.9g).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo:\u003c\/strong\u003e DJI air unit plug-in or analog VTX. \u003cstrong\u003eReceiver:\u003c\/strong\u003e not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrames: \u003ca href=\"\/products\/geprc-gep-mk5-o4-pro-frame\"\u003eGEP-MK5 O4 Pro DC\u003c\/a\u003e, \u003ca href=\"\/products\/geprc-mark4-7-frame\"\u003eGEPRC Mark4-7\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors: \u003ca href=\"\/products\/geprc-speedx2-2207e-motor\"\u003eGEPRC SPEEDX2 2207E\u003c\/a\u003e, \u003ca href=\"\/products\/iflight-xing2-2207-motor\"\u003eiFlight XING2 2207\u003c\/a\u003e, \u003ca href=\"\/products\/rcinpower-aos-supernova-2807-motor\"\u003eRCinPower AOS Supernova 2807+\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGPS: \u003ca href=\"\/products\/geprc-gep-m10-series-gps-module\"\u003eGEP-M10-DQ\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eVideo: \u003ca href=\"\/products\/hglrc-zeus-800mw-smart-mounting-vtx\"\u003eHGLRC Zeus 800mW (analog)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x GEP-F405-HD V3 flight controller\u003c\/li\u003e\n\u003cli\u003e1x TAKER H65_8S_BLS 65A 4-in-1 ESC\u003c\/li\u003e\n\u003cli\u003e1x capacitor\u003c\/li\u003e\n\u003cli\u003e1x DJI air unit adapter cable\u003c\/li\u003e\n\u003cli\u003e1x flight controller adapter cable\u003c\/li\u003e\n\u003cli\u003e1x XT60 power cable\u003c\/li\u003e\n\u003cli\u003e4x M3x30 screws and 4x M3x25 screws\u003c\/li\u003e\n\u003cli\u003e8x nylon nuts and 8x silicone grommets\u003c\/li\u003e\n\u003cli\u003e2x SH1.0 4-pin silicone cables\u003c\/li\u003e\n\u003cli\u003e1x camera connection cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/1-6_a1996dd3-6d68-4ce6-a469-d40e242d7b18.jpg\" alt=\"GEPRC TAKER F405 BLS 65A V2 Stack - product details 1\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/2-8.jpg\" alt=\"GEPRC TAKER F405 BLS 65A V2 Stack - product details 2\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/3-8.jpg\" alt=\"GEPRC TAKER F405 BLS 65A V2 Stack - product details 3\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/4-6.jpg\" alt=\"GEPRC TAKER F405 BLS 65A V2 Stack - product details 4\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/5-6.jpg\" alt=\"GEPRC TAKER F405 BLS 65A V2 Stack - product details 5\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/6-6.jpg\" alt=\"GEPRC TAKER F405 BLS 65A V2 Stack - product details 6\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/7-4.jpg\" alt=\"GEPRC TAKER F405 BLS 65A V2 Stack - product details 7\"\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"65A","offer_id":69465809649698,"sku":"AF-GEP-TAKER-F405-BLS-V2-65A","price":8599.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/9_DeMain_0000-2.jpg?v=1793054882"},{"product_id":"geprc-taker-f405-bls-80a-v2-stack","title":"GEPRC TAKER F405 BLS 80A V2 Stack","description":"\u003cdiv class=\"afd\"\u003e\n\u003cp\u003eThe GEPRC TAKER F405 BLS 80A V2 Stack pairs the GEP-F405-HD V3 flight controller with the TAKER H80_BLS 80A dual-MOS 4-in-1 ESC — a high-current stack for big long-range, cinematic and heavy-lift builds. It ships with an XT90 plug, a 10AWG power lead and a dual-capacitor filter board, and plugs straight into a DJI air unit.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/0_DeMain_0000-1.jpg\" alt=\"GEPRC TAKER F405 BLS 80A V2 Stack\"\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul class=\"afk\"\u003e\n\u003cli\u003eMainstream STM32F405 processor with the ICM42688-P gyro\u003c\/li\u003e\n\u003cli\u003e16MB onboard blackbox for flight logs\u003c\/li\u003e\n\u003cli\u003eIntegrated LC power filter\u003c\/li\u003e\n\u003cli\u003eType-C USB port\u003c\/li\u003e\n\u003cli\u003ePlugs straight into a DJI air unit — no soldering for HD video\u003c\/li\u003e\n\u003cli\u003eDual independent BEC: 12V @ 2.5A and 5V @ 3A\u003c\/li\u003e\n\u003cli\u003eTAKER H80_BLS 80A 4-in-1 ESC with dual MOSFETs for high current\u003c\/li\u003e\n\u003cli\u003eSilicone shock-absorbing mounts keep the gyro stable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFlight controller (GEP-F405-HD V3)\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMCU\u003c\/th\u003e\n\u003ctd\u003eSTM32F405\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGyro (IMU)\u003c\/th\u003e\n\u003ctd\u003eICM42688-P (SPI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBarometer\u003c\/th\u003e\n\u003ctd\u003eYes (onboard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlackbox\u003c\/th\u003e\n\u003ctd\u003e16MB onboard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOSD\u003c\/th\u003e\n\u003ctd\u003eBetaflight OSD (AT7456E chip)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUARTs\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor outputs\u003c\/th\u003e\n\u003ctd\u003eM1–M6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBEC\u003c\/th\u003e\n\u003ctd\u003e5V @ 3A + 12V @ 2.5A, dual independent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower filter\u003c\/th\u003e\n\u003ctd\u003eIntegrated LC filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUSB\u003c\/th\u003e\n\u003ctd\u003eType-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAir unit\u003c\/th\u003e\n\u003ctd\u003eDirect plug-in for DJI air unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e3–6S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e37.15 x 37.15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003e30.5 x 30.5mm (4mm holes, 3mm with silicone grommets)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e7.3g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFirmware target\u003c\/th\u003e\n\u003ctd\u003eGEPRCF405\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eESC (TAKER H80_BLS 80A 4-in-1)\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eContinuous \/ burst\u003c\/th\u003e\n\u003ctd\u003e80A \/ 85A (5 seconds)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e3–6S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFirmware\u003c\/th\u003e\n\u003ctd\u003eBLHeli_S, target B_X_30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtocols\u003c\/th\u003e\n\u003ctd\u003eDShot150 \/ DShot300 \/ DShot600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent sensor\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e56.3 x 61.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003e30.5 x 30.5mm (4mm holes, 3mm with silicone grommets)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e28.1g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 3–6S LiPo. Ships with an \u003cstrong\u003eXT90\u003c\/strong\u003e battery plug and 10AWG lead (not XT60).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck frame clearance first:\u003c\/strong\u003e the ESC board is 56.3 x 61.1mm — much larger than the 42 x 45.7mm board on the 60A\/65A stacks — though it still uses 30.5 x 30.5mm mounting holes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e 7\" and larger long-range, cinematic and heavy-lift builds. For 5\" see the \u003ca href=\"\/products\/geprc-taker-f405-bls-60a-v2-stack\"\u003e60A V2 Stack\u003c\/a\u003e or \u003ca href=\"\/products\/geprc-taker-f405-bls-65a-v2-stack\"\u003e65A V2 Stack\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e stack about 35.4g (FC 7.3g + ESC 28.1g).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo:\u003c\/strong\u003e DJI air unit plug-in or analog VTX. \u003cstrong\u003eReceiver:\u003c\/strong\u003e not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with (available at AeroFlow)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrame: \u003ca href=\"\/products\/geprc-mark4-7-frame\"\u003eGEPRC Mark4-7\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotors: \u003ca href=\"\/products\/rcinpower-aos-supernova-2807-motor\"\u003eRCinPower AOS Supernova 2807+\u003c\/a\u003e, \u003ca href=\"\/products\/iflight-nidici-3115-motor\"\u003eiFlight NIDICI 3115\u003c\/a\u003e, \u003ca href=\"\/products\/madmotor-bsc-3115-motor\"\u003eMadMotor BSC 3115\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGPS: \u003ca href=\"\/products\/geprc-gep-m10-series-gps-module\"\u003eGEP-M10-DQ\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eVideo: \u003ca href=\"\/products\/hglrc-zeus-800mw-smart-mounting-vtx\"\u003eHGLRC Zeus 800mW (analog)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x GEP-F405-HD V3 flight controller\u003c\/li\u003e\n\u003cli\u003e1x TAKER H80_BLS 80A 4-in-1 ESC\u003c\/li\u003e\n\u003cli\u003e1x filter board (dual 50V 2200µF capacitors)\u003c\/li\u003e\n\u003cli\u003e1x DJI connection cable (SH1.0 6-pin, 100mm)\u003c\/li\u003e\n\u003cli\u003e1x FC adapter cable (SH1.0 8-pin, 30mm)\u003c\/li\u003e\n\u003cli\u003e1x receiver silicone cable (SH1.0 4-pin, 150mm)\u003c\/li\u003e\n\u003cli\u003e1x camera connection cable (SH1.0 to SH1.25 3-pin, 60mm)\u003c\/li\u003e\n\u003cli\u003e1x VTX connection cable (SH1.0 4-pin to 6-pin, 100mm)\u003c\/li\u003e\n\u003cli\u003e1x XT90 battery plug\u003c\/li\u003e\n\u003cli\u003e1x red and black power cable (10AWG, 240mm)\u003c\/li\u003e\n\u003cli\u003e4x M3x30 screws and 4x M3x25 screws\u003c\/li\u003e\n\u003cli\u003e8x M3 nylon nuts\u003c\/li\u003e\n\u003cli\u003e12x M3 silicone anti-vibration grommets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GEPRC","offers":[{"title":"80A","offer_id":69465809977378,"sku":"AF-GEP-TAKER-F405-BLS-V2-80A","price":11999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/files\/0_DeMain_0000-1.jpg?v=1793054883"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0900\/8562\/1794\/collections\/geprc-logo.png?v=1792193271","url":"https:\/\/aeroflow.in\/collections\/geprc.oembed?page=2","provider":"AeroFlow","version":"1.0","type":"link"}